alleyhoops
Phila
Thanks for the reply, weight isn't maybe top 5 factor, but it actually gives me a little of mind. Should easily fit discretely in my pockets. I've had a few vapes where the stem was snug, but wasn't as secure as I liked.
Discontinued Lil' Bud by Vapwood
- Thread starter Bravesst
- Start date
Thanks for the reply, weight isn't maybe top 5 factor, but it actually gives me a little of mind. Should easily fit discretely in my pockets. I've had a few vapes where the stem was snug, but wasn't as secure as I liked.
P.A.M.
Vapo Rising
Wedge your wooden tube all you want in the LB , at your own risk , not of breaking it , of it being stuck in there lol . Just like the on demand nature of the Lil Bud , you are in control of how snug or secure you want your stem to be.
It would be ackward in tighty whites but if loose enough pockets or pants or in a summer jacket pocket, the LB is an excellent travelling companion.
Always a risk of your load loosening and falling on heater screen if leaving stem inserted and in your pockets , perhaps using a two screen in stem with weed in middle approach could eliminate that from happening at all .
We are a bunch of dog lovers here, you've come to right thread!
The LB Elite does offer more stability / constant hits when walking and not totally concentrating on vaping. Just food for thoughts, the Classic is a great choice none the less , and doesn't get much simpler and fun then that
Vape on!
alleyhoops
Phila
The Elite uses a box mod, right? I'll be honest. I am so dumb when it comes to them. I have an Imp and Dave from Mistvape had to set me and walk me through everything. I still use it and it's my only "session" vape. That's when I am in the mood for it. It's not easy on dog walks though lol. I've bought a few other mods and I just can't get them to work right. I like the simplicity of the Classic. I think that's what's so appealing about it.
P.A.M.
Vapo Rising
The simplicity of the Classic is unparalleled. Once you find your groove, which is key, there is nothing but smooth sailing. From the rugged switch, to the lack of circuitry, there literally is nothing to break. As long as 18650 batteries exist, it'll work. The Classic is also the mother of the all wood, glass free concept. "Let's see if we can put a 19/22 female taper directly into wood," someone said. "Can you put the coil and battery side by side?" was another common request. Once I realized how much could be done, the Classic was born. But it all started with a simple sketch from @Alan.
Here's why both the Classic and the Elite work so well!
Alan's original sketch
My original sketch
Here's why both the Classic and the Elite work so well!
Alan's original sketch
My original sketch
Last edited:
papa_ent
Well-Known Member
I concur, the classic is the shiz. I have a cherry and a walnut and I like to switch off cuz they're different, the walnut is newer and heats a touch slower. I use mine for dog walks regularly @alleyhoops, it's definitely pocketable. And you can take a hit, put it away until all clear again, and keep going. For full extraction and no stir I do a little turn clockwise after most hits, works like a charm.
caseball2051
Well-Known Member
Anybody got any"heady" glass stems for their bud?
Id love to buy a really cool colored stem and I'm looking for leads on where I can look.
Id love to buy a really cool colored stem and I'm looking for leads on where I can look.
VoidOfCourse
Well-Known Member
Alan's original sketch
My original sketch
Wow, So frickn cool!!
I feel like I'm looking in the pulp fiction briefcase or at a couple of ancient artifacts or something.
P.A.M.
Vapo Rising
Maybe @phattpiggie could turn you some dope stem . NOt sure he works much with glass but he works with acrylics.seashell,wood,some glass and metal .
Of course , I'd check with @Alan first , never know what the Vape Wizard might have .
caseball2051
Well-Known Member
Thanks for the info. I have a glass lined stem from Alan and it's my most used stem by far.
I ended up going through joda_glass and got myself a cool stem.
I'll post it once I get it
Last edited:
bossman
Gentleman Of Leisure
Are we saying there's an effective glass cooling stem for the LB? If so I want one. I've tried using my 19/19 XL8R stems from my Splinters but they must not not get close enough to the heater because they don't seem to work.
I too use a glass lined stem from Alan. In fact I credit myself for telling folks here they were the truth and now even the LB OGs who were hip to the game before me swear by them.
caseball2051
Well-Known Member
I got my LB and immediately ordered a glass lined stem from Alan because I wanted to restrict the draw speed slightly. It's been my go to stem for a while. It helps cool vapor for sure and it matches my vape.
I recently ordered a short cooling rbt stem and it works great as well. If I remember right the new rbt stems are 18mm instead of 19mm. It fits and functions fine in my lil bud.
The stem I ordered from joda_glass is going to have some sweet red and black swirly wig wag like design as well as with some clear glass. I requested some cooling spikes as well
It costed me 57$ shipped. My VAS rash was flaring up and instead of buying a vape this stem cured me temporarily
P.A.M.
Vapo Rising
I credit myself for telling people the truth too 
As for the tubes , lol , I still swear by the stock 3" wooden tubes personally. The glass lined tubes are nice, I have 2 of them (tubes/inserts), already broke
One of the tube's insert, the other got quite gump up between the screen and glass being my
Glass wasn't fully inserted touching the screen . They have pro's and cons. Using a glass lined tube exclusively for a couole weeks and going back to the stock tube makes one realise the stock tubes are just fine and more practical for a portable durable use .
Vape on !
I agree on the tubes. I fall in love with the glass lining, than again with the wide open 18 mm tube. They both have pro and cons for sure. Much of what I like about the glass is the narrowing of the ID, which could be really accomplished with no glass very easily. Also easy to swap out or clean. Once the tube is used without glass, inserting the tube becomes difficult. It's really just another cool option.
As for the tubes , lol , I still swear by the stock 3" wooden tubes personally. The glass lined tubes are nice, I have 2 of them (tubes/inserts), already broke
One of the tube's insert, the other got quite gump up between the screen and glass being my
Glass wasn't fully inserted touching the screen . They have pro's and cons. Using a glass lined tube exclusively for a couole weeks and going back to the stock tube makes one realise the stock tubes are just fine and more practical for a portable durable use .
Vape on !
nonbeliever
Well-Known Member
As for the tubes , lol , I still swear by the stock 3" wooden tubes personally. The glass lined tubes are nice, I have 2 of them (tubes/inserts), already broke
One of the tube's insert, the other got quite gump up between the screen and glass being my
Glass wasn't fully inserted touching the screen . They have pro's and cons. Using a glass lined tube exclusively for a couole weeks and going back to the stock tube makes one realise the stock tubes are just fine and more practical for a portable durable use .
Vape on !
I’ve been loving the 8mm draw walnut tubes I had @Alan make for me. Tasty, cool, more restriction) and the stainless steel foil baffle helps with restricting the draw even further and cooling.. and no glass to break! I liked the glass liners, unfortunately they had a very short lifespan for me - the final straw was one breaking in my pocket (fortunately, no flesh damage - whew).
VoidOfCourse
Well-Known Member
Same here
Happy Canada Day @P.A.M. Believe me when I say, I'm v-vaping on and on.
Just to clue you in, potential Classic Customers, Cherry and Walnut Classics are now at Maple pricing.
https://vapwood.com
Just to clue you in, potential Classic Customers, Cherry and Walnut Classics are now at Maple pricing.
https://vapwood.com
YaMon
Vaping since 2010
Happy Canada Day brah!
Hello Classics!
My stock of Lil' Bud Classics need some love. In order to make that happen, I'm offering an insane deal on the Classic with 20% OFF using coupon code: CHRISTMASINJULY on all Classic models.
I've got stock in Maple, Cherry and Walnut - Bare Bones and Complete
My stock of Lil' Bud Classics need some love. In order to make that happen, I'm offering an insane deal on the Classic with 20% OFF using coupon code: CHRISTMASINJULY on all Classic models.
I've got stock in Maple, Cherry and Walnut - Bare Bones and Complete
VoidOfCourse
Well-Known Member
I can see one advantage with the LB Classic and that is, The battery is only being used when the button is being ignited. Where as the digital is on the whole session. Although the Elite will be my next order because I do like temp control also.
Last edited: