Discontinued Splinter Z by RBT

Status
Not open for further replies.

Megaton

Well-Known Member
Sorry if this is a bit of a dead horse, but is the only difference between the v1 and v2 splinter Zs the wood type? I know in the normal splinter there was the mica thing, but not sure with the Z!
 
Megaton,

bar119

Well-Known Member
hi again ill like to purchase the wismec Reuleaux RX GEN3.
and i understand i need some kind of software for it .
can you please shure with me the information i need.

thanks
sorry for my english
 
bar119,

tonuzzi

Spoon Dogg
Sorry if this is a bit of a dead horse, but is the only difference between the v1 and v2 splinter Zs the wood type? I know in the normal splinter there was the mica thing, but not sure with the Z!

I believe the Z has the Zion heater and V1, V2 have the Milaana heaters
 
tonuzzi,
  • Like
Reactions: YaMon

SquirrelMaster

Well-Known Member
Last edited:
SquirrelMaster,
  • Like
Reactions: nachooo

VGOODIEZ

Home of the Heavies
Retailer
Sorry if this is a bit of a dead horse, but is the only difference between the v1 and v2 splinter Zs the wood type? I know in the normal splinter there was the mica thing, but not sure with the Z!
Only difference between these two is the wood. Z1 is Bubinga, Z2 is Blackwood. Z2 stems are also smoked where the Z1 is clear.
 

nachooo

Well-Known Member
Which Dremel to do you use? I see there a few diamond bits and also Silicon Carbide like this one https://m.kmstools.com/dremel-84922-silicon-carbide-grinding-stone-8020 that are rated for glass.
I have a lot of grinding pieces that came with the dremel machine..and as I lost the paper with specs so I checked some of them and I decided the most suitable was one that have the same Green color that the one you have pointed.. So probably is silicon carbide.
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
hi again ill like to purchase the wismec Reuleaux RX GEN3.
and i understand i need some kind of software for it .
can you please shure with me the information i need.

thanks
sorry for my english

Stock software is fine, check out the other threads here for more mod software talk. Just use stock with wattage and you'll be fine to get started
 

KeroZen

Chronic vapaholic
Which Dremel to do you use? I see there are a few Diamond bits and also Silicon Carbide like this one https://m.kmstools.com/dremel-84922-silicon-carbide-grinding-stone-8020 that are rated for glass. I'm going to pick up a cheap one and try it on my drill which spins at just under the required speed.

I had success using diamond coated cutting discs, but using them to slowly grind the glass with the sides of the disc, not trying to cut it using the knife edge. Proceeding slowly under running water it wasn't too difficult.
 

cybrguy

Putin is a War Criminal
Not me, man. If I had a glass key I might try cutting a stem and annealing the edge, but I would NOT sand glass or cut it with a dremel or other spinning cutter. Just not my thing and I don't have proper safety goggles, gloves or face mask. I'd rather pay a few bucks to have someone else do it. I have a couple of DDave's wands I hope to cut and use again some time.
 
Last edited:
cybrguy,
  • Like
Reactions: KeroZen

eideal852

Well-Known Member
Not me, man. If I had a glass key I might try cutting a stem and annealing the edge, but I would NOT sand glass or cut it with a dremel or other spinning cutter. Just not my thing and I don't have proper safety goggles, gloves or face mask. I'd rather pay a few bucks to have someone else do it. I have a couple of DDave's wands I hope to cut and use again some time.
damn. this thread gets me all psyched up and ready and you just put me back in my place. Okay, so who's a champ that wants to grind stems for scared peeps?
 
eideal852,
  • Like
Reactions: cybrguy

mucsusn

60 going on 20
Great. Just what I needed to do. Bought a Z with all the fixins'. I'm still honeymooning with my Lotus too. I really should sell off some vapes. This is getting ridiculous.
Yeah, i haven’t stopped for three and a half years
 
mucsusn,
  • Like
Reactions: cybrguy

DeezVaprz

Well-Known Member
The good news is my custom PH arrived a day early! The bad news is that the glass has come unglued from the body...

Same thing happened to my PH Z I purchased over 420. Quick turnaround w/ the repair sent directly to RBT. Definitely noticed a difference in how much adhesive was used the second time around but so far no smells/loosening.
 

eideal852

Well-Known Member
Same thing happened to my PH Z I purchased over 420. Quick turnaround w/ the repair sent directly to RBT. Definitely noticed a difference in how much adhesive was used the second time around but so far no smells/loosening.
damn. Quick turnaround? Mines been delivered per tracking but no word from Ryan at all. When did you send?
 
eideal852,

VoidOfCourse

Well-Known Member
just order splinter z v2 cant wait....
please link me to see what mod should i buy and any other accessories.
thanks love fc
alrady have mighty and dyna M18
hi again ill like to purchase the wismec Reuleaux RX GEN3.
and i understand i need some kind of software for it .
can you please shure with me the information i need.

thanks
sorry for my english
Hi, friend. You could buy here https://vgoodiez.com/collections/wi...attery-by-wismec-black?variant=14805753692212
and select
-Sur_myevic software preloaded-
in options box if you don't want to load the software. They have other colors and accessories as well :)
 
Last edited:
VoidOfCourse,

DeezVaprz

Well-Known Member
damn. Quick turnaround? Mines been delivered per tracking but no word from Ryan at all. When did you send?

Not sure exactly but I bought it over the 4/20 weekend, got it a week later, shipped it out on a Tuesday, it was delivered Thursday and back in my hands Monday. I was surprised at how quick it was and it was the same exact Z I sent in so it wasn't replaced. In any case, still very satisfied with the Z. Sorry you haven't heard back!
 
DeezVaprz,

Drug

Well-Known Member
I got myself the Splinter Z and the Wismec RX Gen3 dual mod, but I can't get it to work. I have the my_evic software installed, but it's not heating at all. Any advice? My guess is is either the mod is incorrectly set or the Splinter Z is DOA. I'm totally new to mods, so hoping it's some rookie mistake.
 
Drug,

Penny Wise

Active Member
Hey guys! I have a question for you. What would be the best way to get the oil out of a XL8R stem in a form that I can vape? I use Q-tips but they of course don't get all the nooks and crannies.
 
Penny Wise,

YaMon

Vaping since 2010
I got myself the Splinter Z and the Wismec RX Gen3 dual mod, but I can't get it to work. I have the my_evic software installed, but it's not heating at all. Any advice? My guess is is either the mod is incorrectly set or the Splinter Z is DOA. I'm totally new to mods, so hoping it's some rookie mistake.
What is the measured resistance showing on your Mod of your Splinter Z? What temperature do you have set? Remember these temperatures are arrived at from calculations derived from assumptions based upon a change in resistance, in other words they are not thermometer accurate, but will give you a way to measure and repeat a desired result at a. later date. Have you tried just wattage mode yet?
 
YaMon,
  • Like
Reactions: Drug
Status
Not open for further replies.
Top Bottom