scooterboy

Muppet, not moped.
I'm thinking maybe some sort of cosmetic jar might work for you.

Perhaps something like this. https://infinityjars.com/products/1...5mCpqDAhwQsDE-7uPHWEH_BJFO3VlgXBoCueIQAvD_BwE
Those look pretty nice, but a bit pricier than I'd like. :)

@scooterboy: I would suggest a jar of baby food, simply clean it well and dry it and you’re good to go. It’s a very cheap option, I’ve used one myself and you’re not going to get much smaller in a “traditional” glass jar form.
Baby Food Jar

There are also those small concentrate containers but they might not be quite big enough:
Link

I can’t vouch for the website or jar but it looks like it fits your criteria:
Link
Thanks for those suggestons, but I don't think any of those are wide enough. I did find these and they're pretty much what I want:

https://www.amazon.com/Nakpunar-Mason-Glass-Jars-Gold/dp/B011S23QCC

I'm going to try them.
 

Vapor_Eyes

taste buds

Hjalmark

Oldest boy alive
Not said much here over the years but I had a Enano now for... Uh 4 years? 5 years maybe?!?

Only vape that I have owned that never given me any guff and always works as advertised or beyond :rockon:

Its old scratched and cracked shell but still I have maybe cleaned the heater.. 5-6 times by running a paper tissue through it while hot and that is enough maintenance for that vape

Also still using original basket screens i bought :nod:

If I would recommend quality then I would recommend the Enano
 

UnevenPizza

I dream of Pizza
Hey, what's crackin' @Hjalmark!

I got a pair of "authentic" japanese chopsticks the other day, with a nice forest pattern on them from a work colleague who vacationed there, I'm using that now to replace the old no-name stick for adjusting/reforming my basket screens, feels like royalty :lol:

I'm Catsitting for a week and I didn't bring my nano, zut alors!
I'll have to venture back on a search and rescue mission tomorrow and save the whole setup (nano, gongs, converter, power, lava lamp, glass...

Been trying to taper my use and am trying to stay below 0.5g/day, the nano is great for this due to working so well with tiny amounts of bud!
 
Last edited:

scooterboy

Muppet, not moped.
Those are almost twice as tall as what you’re using now, I thought you wanted something short with similar dimensions? :hmm:

Either way I’m glad you found what you’re looking for. :peace: :leaf: ;pd;

Earlier post from me:
How tall is that? If the 4 oz jelly jars are too tall, I have to think the 8 oz would be as well (even with the wide mouth). I would like something literally 1-1.5 inches tall.

These are 1.5 inches high - I estimate that my case will handle that height. We'll see!
 
I know it's not a jar and it's not even 100% air tight but when I go out, I grind up what I need and put it in an Altoids tin. Definitely not great for longer than that night but it is super easy to open and close. It is just the right size for filling stems. It can't break. The lid is attached. It looks inconspicuous sitting on the bar. And, whatever is leftover the next day, I roll a joint and smoke it.

Plus, I am an Altoids addict and I had a zillion empty tins. LOL

Good luck with your jars. Glad you found one that fits.
 

UnevenPizza

I dream of Pizza
I know it's not a jar and it's not even 100% air tight but when I go out, I grind up what I need and put it in an Altoids tin. Definitely not great for longer than that night but it is super easy to open and close. It is just the right size for filling stems. It can't break. The lid is attached. It looks inconspicuous sitting on the bar. And, whatever is leftover the next day, I roll a joint and smoke it.

Plus, I am an Altoids addict and I had a zillion empty tins. LOL

Good luck with your jars. Glad you found one that fits.


That's awesome, you could maybe make it airtight with a strip of glue/silicone or something..at home I just keep it in the grinder, I'm a simpleton in that regard.

Regarding vaporizers however, I am a CIVILIZED KING!
I had some amazingly smooth and large hits with the nano and the ice-stem, it's awesome. So efficient, too.
 

scooterboy

Muppet, not moped.
I know it's not a jar and it's not even 100% air tight but when I go out, I grind up what I need and put it in an Altoids tin. Definitely not great for longer than that night but it is super easy to open and close. It is just the right size for filling stems. It can't break. The lid is attached. It looks inconspicuous sitting on the bar. And, whatever is leftover the next day, I roll a joint and smoke it.

Plus, I am an Altoids addict and I had a zillion empty tins. LOL

Good luck with your jars. Glad you found one that fits.
The cans I'm using are about the height of an Altoids tin. But they have screw-on caps that, although not 100% airtight, would be more airtight than the Altoids tin. But I do agree that the rectangular shape would lend itself better to scooping than my round tins do.

New jars are on the way.
 

ataxian

PALE BLUE DOT
Not said much here over the years but I had a Enano now for... Uh 4 years? 5 years maybe?!?

Only vape that I have owned that never given me any guff and always works as advertised or beyond :rockon:

Its old scratched and cracked shell but still I have maybe cleaned the heater.. 5-6 times by running a paper tissue through it while hot and that is enough maintenance for that vape

Also still using original basket screens i bought :nod:

If I would recommend quality then I would recommend the Enano
I am like U somewhat?
The NANO I love !
Da size?
Daze & Confused?
Thing work’s simple!
GDP does not lie!
 

scooterboy

Muppet, not moped.
If I used a pollen press and made some kief tablets, how would one of them vape in the enano? Would the heat slowly "eat away" at it, or would it just immediately fall apart once hit by the heat?

I'm trying to figure out the best way to use kief with the enano. I already do the flower|kief|flower sandwich, but wondered about other methods.
 

ubardog

Well-Known Member
heyo.
I got a 2nd hand Nano heading to the UK.

"You would need to purchase a 220v to 110v step down converter with a minimum of 50 watts to use the E-Nano. The proper converter will not effect the life of the E-Nano."

I been looking at 220v to 110v step down converters and I would like some more info.
A 50w converter likes to only run at 50w for 1hour and 35w continuously.
Do I need to get a 100w that will peak at 100w but run continuously at 80w ?
What Wattage does the nano draw.
Thanks
 

arb

Semi shaved ape
If I used a pollen press and made some kief tablets, how would one of them vape in the enano? Would the heat slowly "eat away" at it, or would it just immediately fall apart once hit by the heat?

I'm trying to figure out the best way to use kief with the enano. I already do the flower|kief|flower sandwich, but wondered about other methods.
I lower the screen about 5 MM scoop in a tiny amount and enjoy........been doing that a LOT today.
:D
 

Hjalmark

Oldest boy alive
heyo.
I got a 2nd hand Nano heading to the UK.

"You would need to purchase a 220v to 110v step down converter with a minimum of 50 watts to use the E-Nano. The proper converter will not effect the life of the E-Nano."

I been looking at 220v to 110v step down converters and I would like some more info.
A 50w converter likes to only run at 50w for 1hour and 35w continuously.
Do I need to get a 100w that will peak at 100w but run continuously at 80w ?
What Wattage does the nano draw.
Thanks
Hey fellow euronite (hopefully continue as EU member) the Enano only draws 20-30 Watts or something low like that but to keep it on and safe without too much annoying buzzing your going to want at least 100watt like this one I got
images

But I am still dealing with annoying electric buzzing that is driving me insane but at least I can calm down with a nice enano hit

I seen talks about buying even bigger one like these here https://www.amazon.co.uk/240v-110v-Step-Down-Transformer/dp/B000NIYH94
But not sure if they are totally silence either

Some other 240/220v enanoer has to weight in on that, I been waiting for 5 years for the Enano heater to give up so I can replace the insides but the damn Enano is just too well made and refuses to die :hmm:

A 220v Enano would be freaking amazing because the transformer is 2 kg or 4 freedom units and makes this small packade kind of bulky
 

UnevenPizza

I dream of Pizza
I got one that uses some kind of "galvanic" conversion?? it's like a round body...like this, but a bit of different text on it.
It's very quiet! The ones I've had before always started whining/buzzing after a few hours of continuous use. This one is really quiet unless it's cable crosses or touches an AUX-cord or speakers, sometimes...

Nano power on the weekend! Chillaxin with pizza and some crumbs of X18.
 

ubardog

Well-Known Member
heyo.
I got a 2nd hand Nano heading to the UK.

"You would need to purchase a 220v to 110v step down converter with a minimum of 50 watts to use the E-Nano. The proper converter will not effect the life of the E-Nano."

I been looking at 220v to 110v step down converters and I would like some more info.
A 50w converter likes to only run at 50w for 1hour and 35w continuously.
Do I need to get a 100w that will peak at 100w but run continuously at 80w ?
What Wattage does the nano draw.
Thanks

Well I looked at 1st post of this thread and found my answer

11 watts of full ac power = Plenty of power for concentrates.

Lolz things need to be simpler for medicated minds :rofl::myday:

Hopefully the cheap 50w converter does not wine to much. Can't wait to join nano club
 

FlyingLow

Team NO SLEEP!
I've just gone nearly 10 months without a functional Nano. I will never be so LAZY again!

I can't believe it took me so long to ship this in for repair, thank you Nadia and your whole team! I just put it on power and am heating back up now... May its light never go out!


UPDATE
My nano is cookin now! I missed this one so much! And there in lies the problem with having too many vapes- I kept kicking this repair further down the road, as I collected so many other devices to keep me going... but none can do what the Nano does. She is a Beautiful Beast, nothing competes!
 
Last edited:

UnevenPizza

I dream of Pizza
Schlepping the transformer and all the accessories along for being away from home is totally worth it! Very chill day off, charging up for the next week...

I used the elastic hairband technique to arrest the nano-dial in place because I never really moved it about much on my desk, and now suddenly need to hold it in place because I'm slidin around the room with it haha.

IMG-20190512-185040.jpg

Also in the pic is that nice chopstick from Japan :D

Happy Sunday!
 

arb

Semi shaved ape
Schlepping the transformer and all the accessories along for being away from home is totally worth it! Very chill day off, charging up for the next week...

I used the elastic hairband technique to arrest the nano-dial in place because I never really moved it about much on my desk, and now suddenly need to hold it in place because I'm slidin around the room with it haha.

IMG-20190512-185040.jpg

Also in the pic is that nice chopstick from Japan :D

Happy Sunday!
Damn........that is a nice chopstick!
 

bizwaxzion

Enigmatic Cannabist
Hey, just got notified that it's my 2-year Anniversary on FC :party:

Havin' huge celebratory tokes on the Ice-stem, it really allows for long draws...maybe too long to handle, so b e warned! :whoa:
Yes, dig the ice stem and I'm waiting on a package today that will allow me to fill my regular stem with 8mm spheres held in by a second screen.

Edit to add picture of the epic ice-xl
14c400k.jpg
 
Last edited:
Top Bottom