• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

StemPod by MPL

nickb

SSV w/ Standard HC, LSV HC, thermovape all,
My origonal deck wont work anymore i keep getting

Atomizer short message on my mod, luckily i had the qua deck as a backup, anybody else have this problem or know how to fix it
 
nickb,

A7XFREAK674

@a7xVapes
My origonal deck wont work anymore i keep getting

Atomizer short message on my mod, luckily i had the qua deck as a backup, anybody else have this problem or know how to fix it
First thing I would try is cleaning the threads and contacts of the deck and mod with some iso. That has always been my first step in troubleshooting with RDAs.
 
A7XFREAK674,
  • Like
Reactions: KeroZen

jardri

Vapor Dreams
Hello! I just bought an Herborizer Sphere suction tube 18.8 and it works wonderful!! Long straight borosilicate stem with extremely cool and flavourful profile. I am using basket screens and its my fafourite mouthpiece atm.
 
Last edited:

snamuh

ghost
I'm not a fan of trc or tc. I always end up getting knocked out and back to wattage no matter what atomizer or mod I'm using.

Wattage mode is great. With a vape like this wattage mode its like hitting "greens" without combustion. Wattage mode is like nursing a regular bowl.

Last night I was using the stock stem with no o ring. Mine doesn't seem to fully fit the sp and I hadn't used it much before because of that reason. But last night I used it and it provided great manual hits. I spun the stem around while hitting which probably evens out the vaping of the herb and by pulling the stem out I can add control to my draw and the amount of heat being pulled through. For home use it's great.
 
snamuh,
  • Like
Reactions: Summer

supershredderdan

Well-Known Member
Manufacturer
Hey everyone just found out anyone sending an email using the contact form is getting sent to my spam folder. This means I've missed a lot of people's emails, and I can't recover anything past 30 days so who knows how many inquiries I've missed. This sucks majorly and I apologise for this. I'm gonna try to get it sorted out and make up for the lack of response with a big sale or something. If anyone knows WordPress and thinks they can help me fix this please reach out and if you have been trying to reach me try sending an email from your client to dan@modpodlabs.com in the meantime .

Sorry again for this, I'll do all I can to fix it


Update: offering 30% off with code MPL30 till the 20th. Hope this makes things a bit better (:
 
Last edited:

nickb

SSV w/ Standard HC, LSV HC, thermovape all,
just wanted to say thank you to DAN for great customer service, also i finally have a use for my Grasshopper,
I cut the tip off of my silicone tip and put the remainder over the 18mm side of an 18mm/14mm male/ male piece into the stempod and it IMO works better than an oring inside, much easier to put on and rarely needs adjustment also very air tight... also this makes pretty much any 18mm male fitting fit snug in the stempod
just wanted to mention this vape is an absolute beast.. by far my favorite. i finally feel like i dont need to shop anymore i am finally satisfied... 10 for 10 IMO.. the only thing i would change is like i said 2mm taller above the screen..
BTW I am currently using staggered fused claptons ss316 from AKATTAC (28*32) GA*2 WRAPPED 32GA AT .03 OHM, LIKE .19 WITH THE PAIR got 20 for $14.99 on ebay. the ramp up time is a little slower but they are robust coils. i hope i can learn to build the quad deck when one of those coils goes out, so far loving the customability of this vape.
 
Last edited:

Acaveman

New Member
WOW!
I just received my Stempod and I am very happy with it. I didn't do too much research just watching videos and I found it very easy to use. I combusted my first bowl being stupid, I did a preheat with the loaded stem in and I preheated waaaay too long. I saw the stem turn white and I immediately drew on it...gross. I'm using the Aegis Legend in wattage mode at 34 watts and didn't get to try another setting with this fresh bowl, I took one hit at 34 watts and I am very very high. When I exhaled and tasted that vapor I knew I was gonna get rekt. I'm loving the Stempod and wish I bought it a long time ago.

Thank you MPL and the peeps here who figured this thing out.
 

Improvaper

Well-Known Member
Hey guys, a little question about DNA mods...

I just got a Reuleaux DNA 200 and I'm having trouble getting TC happening. I've tried the stempod profile from FCSettings but can't get any heat going hardly (and not even close to vapor) at all unless I turn the temperature setting to off. I've tried the stock ss316 profile as well with the same results. My clapton coil is showing up at .3 and I'm locking it. What am I missing here?
 
Improvaper,
  • Like
Reactions: foggyent

foggyent

Well-Known Member
Hey guys, a little question about DNA mods...

I just got a Reuleaux DNA 200 and I'm having trouble getting TC happening. I've tried the stempod profile from FCSettings but can't get any heat going hardly (and not even close to vapor) at all unless I turn the temperature setting to off. I've tried the stock ss316 profile as well with the same results. My clapton coil is showing up at .3 and I'm locking it. What am I missing here?
I have the same mod and never had much luck with the FCShare DNA settings. In the end I loaded a bunch of different TCR settings and payed around with it until I was happy with the vapor. I think you can also adjust the curves on the material files, but from what I could tell they are all straight curves so they probably don't offer much benefit over using a TCR value.
 

Improvaper

Well-Known Member
I have the same mod and never had much luck with the FCShare DNA settings. In the end I loaded a bunch of different TCR settings and payed around with it until I was happy with the vapor. I think you can also adjust the curves on the material files, but from what I could tell they are all straight curves so they probably don't offer much benefit over using a TCR value.

Mind sharing your settings? I'm relegated to power mode because I just can't get it to happen with tc.

Also, my settings for what's displayed in the screen don't seem to be sticking. The mod is being recognized and accepting updates and all appears correct .
 
Improvaper,

foggyent

Well-Known Member
Mind sharing your settings? I'm relegated to power mode because I just can't get it to happen with tc.

Also, my settings for what's displayed in the screen don't seem to be sticking. The mod is being recognized and accepting updates and all appears correct .
I mostly use wattage mode at 45 Watts and TC at TCR 170 but I am using custom coils (20 Gauge SS 316L 7.5 wraps)
 
foggyent,

Improvaper

Well-Known Member
I have the same mod and never had much luck with the FCShare DNA settings. In the end I loaded a bunch of different TCR settings and payed around with it until I was happy with the vapor.

Thanks for this. I didn't realize there was a TCR override in the materials section of Escribe. Once I set it to 230 where it was working flawlessly on my Evic V2, the DNA 200 was dialed right in. Man, does it lock temp better than Tubo on Evic! I see why these mods cost so much. I lucked into mine (freebie handmedown from a friend) and it is kicking ass paired with the StemPod.
 

Easywider

Simple is the way
Just got some 20 gauge SS316L in yesterday. Made some coils 9 wraps with 4mm ID. Like swapping the family sedan engine with a big block. Just pumps out the heat but chews through battery power in the process. They don't seem to be the most efficient even with a 3 battery mod but they pump the steam.

IMG-0579.jpg
 

mlongpre

New Member
I agree, lower gauge is the way to go from a pure heat standpoint. I started off with MKWS 18ga from fasttech. Worked okay, could still see a slight glow with the heat I like. I thought that was odd so I measured the wire and it’s too small to be 18ga. So I went searching for more SS wire and found some 19ga Kbee Vapes wire that was true to size. Wrapped 8 at 3.5mm and stuck them in. Ohms are at 0.09 and I can now run super hot without coil glow! Weeeeeeeeee!

Picture of coils
 
Top Bottom