MUSA Wooden Vape
- Thread starter f2j
- Start date
Azn2101
Well-Known Member
I cant freaking wait for this Vaporizer!
Shout-Out to @MUSA Vaporizer for the quick build & Great price.
Hey @DDave im scoping these new IH mods for Dynavaps and was wondering if they would make Dynavaps without a cap applicable to this vape with an 18-14 (im guessing) F/F adapter because they do have airholes at the bottom from what I can see. What does it offically reduce the size to?
I really hope the answer is a yes cause this will turn basically all vaporizers Dynavap-applicable.
Thanks DDave and if so I got dibs on one
,
Azn2101
Edit: I think that's the Mod is for a 18/18 F/F vut im terrible at judging things in photos.
*DRUM ROLL*
Shout-Out to @MUSA Vaporizer for the quick build & Great price.
Hey @DDave im scoping these new IH mods for Dynavaps and was wondering if they would make Dynavaps without a cap applicable to this vape with an 18-14 (im guessing) F/F adapter because they do have airholes at the bottom from what I can see. What does it offically reduce the size to?
I really hope the answer is a yes cause this will turn basically all vaporizers Dynavap-applicable.
Thanks DDave and if so I got dibs on one
,Azn2101
Edit: I think that's the Mod is for a 18/18 F/F vut im terrible at judging things in photos.
*DRUM ROLL*
Last edited:
Greetings @Azn2101I cant freaking wait for this Vaporizer!
Shout-Out to @MUSA Vaporizer for the quick build & Great price.
Hey @DDave im scoping these new IH mods for Dynavaps and was wondering if they would make Dynavaps without a cap applicable to this vape with an 18-14 (im guessing) F/F adapter because they do have airholes at the bottom from what I can see. What does it offically reduce the size to?
I really hope the answer is a yes cause this will turn basically all vaporizers Dynavap-applicable.
Thanks DDave and if so I got dibs on one
Azn2101
Edit: I think that's the Mod is for a 18/18 F/F vut im terrible at judging things in photos.
*DRUM ROLL*
Forgive me, but I don't understand what you're asking for. I see how the 18mm F/F can be used with this vape, but I'm lost on the DynaVap portion of your post. Let me know what is being attempted...
Thanks
DDave
little maggie
Well-Known Member
Are you talking about something like the woodscent that uses a vapcap without the cap as part of the stem?I cant freaking wait for this Vaporizer!
Shout-Out to @MUSA Vaporizer for the quick build & Great price.
Hey @DDave im scoping these new IH mods for Dynavaps and was wondering if they would make Dynavaps without a cap applicable to this vape with an 18-14 (im guessing) F/F adapter because they do have airholes at the bottom from what I can see. What does it offically reduce the size to?
I really hope the answer is a yes cause this will turn basically all vaporizers Dynavap-applicable.
Thanks DDave and if so I got dibs on one
Azn2101
Edit: I think that's the Mod is for a 18/18 F/F vut im terrible at judging things in photos.
*DRUM ROLL*
Azn2101
Well-Known Member
Hey @DDave! Exactly what @little maggie is describing about converting this unit into a Woodscents-ish type attachment.
With a 18/18 F/F adapter for the Dynavap IH Mod. The Mod being on the top Female joint and the bottom attached to the MUSA. I was hoping with that attachment that we could then insert a Dynavap and use it as the Tube in a Similar fasion to Ed's Woodscents Models.
Do you think the Mod is capable of creating a seal without that extra few mm's that the cap adds?
Last edited:
The IH Mod is not made for vaping, solely for insulation to avoid melting the plastic of the IH with a hot vapcap cap.
The bottom of the Concentration Chamber is made for vaping, but I don't see it working in this configuration.
How about this setup?
It's a 14mm/18mm Adapter with installed center screen. The 18mm would fit the MUSA heater cover. The 14mm wand & basket would take the place of the vapcap tip.
blokenoname
DIY Log Dabbler 😁🪵💪💨💨💨
This can be achieved relatively easy, by installing an Arizer EQ ellbow screen into the 18mm male joint, that serves as a heater port and setting the lid of the ELB screen into that.
However, my unit is older and its heater is sitting lower in the joint than the one in the more recent units. So I don't know, if this mod still works.
http://fuckcombustion.com/threads/musa-wooden-vape.23239/page-6#post-1236484
Azn2101
Well-Known Member
Ah ok, gotch'ya. I had seen those Inductions Heaters around but I guess just figured...I actually have no idea what I figured lol. But good to know what I need if I ever grab one of those IH models.
That looks like a good set up that I would like to try. Regardless I know im going to need an F/F 18/14 adapter at some point to experiment with other attachments. PMing You =).
Hey man. Ya I looked at your Mod along with the Drip Tip atty for Arizer Stems & Dynavaps and it looks great man the only issue is that I have a Ti tip and I think the draw is a little loose from the trial I did with the other end completely plugged while double packing the 1/2" Basket screens. I was just wondering if @DDave had made a specific attachment that was for the Dynavap to be used in the way Ed utilizes them. But like I said though I will be wanting a 18/18 F/F for the Mods @phattpiggie is doing for Ralph and Paddy over on the TUBO thread. Heres the page (at the bottom) that Padrino posted the pictures are on. But until then that tiny basket screen seems like it would be extremely similar to the Enano fixed stems. Except of course being 14mm instead of 10mm.
I probably should just use the MUSA as is cause It looks like an absolute beast! Im wondering if similar to the VapeXhale Cloud that it can vape uncured/wet material like nothing.
http://fuckcombustion.com/threads/tubo-evic.22992/page-145
Cherry version
Walnut version
Walnut version
PPN
Volute of Vapor
No
blokenoname
DIY Log Dabbler 😁🪵💪💨💨💨
@MUSA Vaporizer
Really like the cherry version
Great work! Keep it up
@-dab8-
It comes with a Cloud Evo ELB screen and a fitting 18/14mm GonG. Should be no problem, to fit a concentrate pad in there, taken from any other vape, like say the ones for a Mighty/Crafty. Hot enough for use with concentrates, it gets easily. No doubt about that
Really like the cherry version
Great work! Keep it up
@-dab8-
It comes with a Cloud Evo ELB screen and a fitting 18/14mm GonG. Should be no problem, to fit a concentrate pad in there, taken from any other vape, like say the ones for a Mighty/Crafty. Hot enough for use with concentrates, it gets easily. No doubt about that
Last edited:
DBA
Well-Known Member
@blokenoname the cherry version is on its way to me now!! First desktop vape!
justcametomind
Well-Known Member
Ez load bowls. Still don't know what Ez stands for.
blokenoname
DIY Log Dabbler 😁🪵💪💨💨💨
Easy Load Bowl, is, I think, the original designation. Ez from easy maybe?
Azn2101
Well-Known Member
@DDave these Mods look freaking perfect man, Thanks for the Custom work =)
I have yet to order a SS Dynavap Tip but since the mini basket screens are pretty easily bent and reformed, can be widened to act as a permiable cap for the Dynavap and since the Ti tip has notches inside they help hold the screen.
The SS Tip will still has it's part to play in a different set up but I'm brain farting while drooling at the endless possibilities of these
Both setups will definitely yield great results but the only one I could test was the Long Stem with .07, Mildly Tamped in a TUBO with a reducer and it felt like an ENano draw with a different bite but about the same amount and quality of vapor
This is going to be fun to try out with the MUSA cause I really can't see anything wrong with these. Buuuuuut those were the Famous Last Words from The Blind Man to the Deaf man.
but seriously the only thing that could be an issue is all based on how close the MUSA's male sits In the Female adaptors.@MUSA Vaporizer when it gets here I'm gonna lock myself In the man cave until the Gov't reopens and I can work again or am blinded by a combination of the Halogen light and a TV screen.
PPN
Volute of Vapor
Sorry I thought you was speaking about something like the glass nail for the Evo, but yes you can with a mesh pad, coton or hemp fibers. I don't own a Musa though...
DBA
Well-Known Member
Ahh it's in the Netherlands so I presume yours may take a bit longer if it was sent out at the same time. That said I have been testing and wow is this thing a monster. As much as I love the Vapcap and the Solo, this thing is in a different league! Additionally I love the visual feedback I get while I'm vaping! On my bubbler the bowl is exactly as eye height and you can just slowly see the weed get vaped (with the halogen light shining on the herbs from above)! I only wish the attachment was 18mm to 18mm! Still going to try to get one if I can (I don't like having to use an 14 to 19mm adapter, just me being picky, doesn't actually impede function).
Also, it gets way hotter than I expected - I'm using high grade pretty dry herb and even at the 10 o clock position it seems to get darker than I like so I haven't figured out the perfect temps for me! This may also be because I draw slowly as I'm used to Vapcap/Solo.
Also, it gets way hotter than I expected - I'm using high grade pretty dry herb and even at the 10 o clock position it seems to get darker than I like so I haven't figured out the perfect temps for me! This may also be because I draw slowly as I'm used to Vapcap/Solo.
Last edited: