little maggie
Well-Known Member
Hopefully the V's are Z style. I find the vapor much milder on the z.
Discontinued The Splinter by RBT
- Thread starter RastaBuddhaTao
- Start date
- Status
NiceInvasion
Well-Known Member
Could any DNA75c owners share their exact routine with the Splinter? I've downloaded the DNAc Splinter profile and updated my mod so it has replay mode as well. I gather the default wattage/temperature setting may be inappropriate for the newer Splinters? Should I change anything?
Using the default 50W/380°F I mostly just get a lot of hot air. Raising it to 400° and taking huge draws deep into my lungs gives me the odd cloud but the avb is still very light.
Using the default 50W/380°F I mostly just get a lot of hot air. Raising it to 400° and taking huge draws deep into my lungs gives me the odd cloud but the avb is still very light.
Hippie
Well-Known Member
Have you tried @HerbieVonVapster 's fcshare files for DNA mods?
https://forum.evolvapor.com/files/file/567-fcshare/
I think he's been documenting the updates in this thread
http://fuckcombustion.com/threads/tc-box-mods-firmware-discussions-and-customizing.23742/
https://forum.evolvapor.com/files/file/567-fcshare/
I think he's been documenting the updates in this thread
http://fuckcombustion.com/threads/tc-box-mods-firmware-discussions-and-customizing.23742/
NiceInvasion
Well-Known Member
That's what I'm using, but I gather it will produce much cooler temperatures with the 19/19 stems, and you have to play around with the values or alter the coil material to compensate. I'm curious to know what other DNA75c users settled on for this.
http://fuckcombustion.com/threads/t...ons-and-customizing.23742/page-8#post-1320683
Grifo
Well-Known Member
So far after getting my gen3 dual i have not turned on my flowerpot. Im not saying its better but it deff satisfies that itch if you know what i mean. Ive been using Artic Fox temp control and really like it so far. The 4 holes seems a little too much for the regular splinter IMHO but i have yet to use it with water since the water adapter isnt in stock yet and idk where else to get one that fits. I will try to find a way to close 2 holes up temporarily but for now i can use my fingers no problem.
vangoquighji
⭐⭐⭐⭐⭐
A question about the RBT Splinter
I am looking into buying the splinter US
and have noticed pre order promotion from RBT web site for 109$
I understand that pre ordered murch is made in China where as most other products are US made
so I was wondering if this means a drop in product quality,
what do you think? about this specific promo in terms of production quality
https://www.rastabuddhatao.com/product-p/sv1i.htm
I am looking into buying the splinter US
and have noticed pre order promotion from RBT web site for 109$
I understand that pre ordered murch is made in China where as most other products are US made
so I was wondering if this means a drop in product quality,
what do you think? about this specific promo in terms of production quality
https://www.rastabuddhatao.com/product-p/sv1i.htm
Hollabackatcha
Well-Known Member
Unless you have a US shipping address and Bank you will need to purchase from one of their distributors
Abysmal Vapor
Supersniffer 2000 - robot fart detection device
@vangoquighji There were some splinters available @VapeFiend.com . They got top notch CS and am pretty sure will get you hooked with one . Also there is some discount code,but i cant recall what is it.. Maybe try 420 at checkout.
vangoquighji
⭐⭐⭐⭐⭐
The latest iteration is the Splinter V1. It is the first “mass-produced” version of the RBT Splinter. From my understanding, the V1 unit is made from parts that were manufactured in China at a professional plant and then assembled in the US by Ryan. RBT has been touting that the new Chinese parts are built to exceed his original expectations, so I don’t think we should be too concerned about any drop in quality. Also, the V1 release includes improvements such as a lower-profile 510 adapter with ceramic components. If you don’t have a Splinter already I suggest you pick up the V1 as it is, technically, an improved version of the older products.
vangoquighji
⭐⭐⭐⭐⭐
i was actually told that the stem glass would be thinner ?
what do you think about mist vape imp
an0maly
Well-Known Member
I have one of those universal WPAs from Delta 3D Studios. It does work with the stem for a Splinter or Milaana. Seems to be a decent option until RBT finally gets WPAs back in stock.
Last edited:
The V1 stem glass might be a little thinner, I’m not too sure about that, but I don’t think it will make much of a difference because the Splinter delivers some heat. Vapor from my Splinter Z with a cooling mouthpiece (Xl8r jr) is a whole lot cooler than with the short standard stem, but I’ve become accustomed to either/or. I haven’t tried the longer standard glass stem.
Can’t talk on the Imp as I’ve never tried it myself. But it does look smaller in size than the Splinter, which is something I wouldn’t mind in terms of portability. Also looks like the Imp brings a cooling stem standard. Personally, I do appreciate the glass-lined oven of the RBT Splinter over anything with a wooden vapor path though.
Hollabackatcha
Well-Known Member
i think it said Feb. at the latest on the site.
vapviking
Old & In the Way
I believe they said shipping in Jan. and all orders complete by end Feb., but thanks for posting, I'm anxiously awaiting my first rbt product!
vangoquighji
⭐⭐⭐⭐⭐
even better for you then
you will be able to compare several various production origins for us))
bossman
Gentleman Of Leisure
In less exciting news I saw Ryan on Instagram the other day and it sounds like the V1 is gonna suffer from that stinky black packing foam like the Fierce preorder did. Sounded like he was leaning toward shipping the orders he has as opposed to delaying a week or two to redo the packaging.
Grifo
Well-Known Member
how long have you had it? ive been using mine all day for the past 5 days.
- Status