• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

ataxian

PALE BLUE DOT

dzoinp

Well-Known Member
Accessory Maker
Has anyone done any mod based in the "SOLID VALVE Filling Chamber Insert" to use instead of the liquid pad method in THE Plenty?
I already had a volcano with solid valve and I remember that this insert worked pretty well to keep the greens in place.
My Plenty is coming and despite coming with the 2 chambers + reducer, it seems to me that the whole width of the chamber will make a difference, right?
 
Last edited:

SonSzu

Member
Holy heck the Plenty's metal coiled pipe stinks.

I've been using straight glass and I'm never looking back.

I'm getting noticeably higher than before. It's tremendous.

I think that the LSV combined with the large water pipe adaptor might suit your needs best because the adaptor has a large capacity, whilst the LSV provides constant temperature without the heat cycle of the Plenty: https://www.elev8glassgallery.com/glass/glass-accessories/adapters/lsv-water-pipe-adapter/

I'll have to check it out. Thanks for the heads up.
 

Sick Vape

Solar Dabs
it seems to me that the whole width of the chamber will make a difference, right?
It does, but I think other variables like the grind and amount are more important.
I think the abv in the big chamber with the pad gets a bit darker than a normal filled small chamber.

And yes S&B should sell those orange chamber housings by the dozens... or distribute for free.
 

ataxian

PALE BLUE DOT
It does, but I think other variables like the grind and amount are more important.
I think the abv in the big chamber with the pad gets a bit darker than a normal filled small chamber.

And yes S&B should sell those orange chamber housings by the dozens... or distribute for free.
Sorry 2 bother U!
I’m so STONED?

Da PLENTY did me in?

MEDICATED was the idea!
STONED is what I got?
Where was I?
Oh I lost the screen on theBlack top piece?
 
Last edited:

YayVap

Well-Known Member
I cycle through my 3 desktop vapes regularly...as in every few days i switch up or whenever it feels right. I have been super impressed with my Plenty again . Been using the small chamber simply because it takes less time to finish . I love the small guy. I don't use the pad or anything anymore i just give it a slight pack and I crank my temp up to 6 -7 range and hit it slowly. Let it get hot first i actually like the stainless coiled whip. It cools the vapor amazingly well due partly to it being coiled. This vape has really grown on me.
 

Sick Vape

Solar Dabs
no thanks

Sorry 2 bother U!
I’m so STONED?

Da PLENTY did me in?

MEDICATED was the idea!
STONED is what I got?
Where was I?
Oh I lost the screen on theBlack top piece?

The Plenty wasn't filled enough to get you this time. Sometimes it is like unmedicated feels stoned, no?

I like that power drill appearance.
 
Last edited:

dzoinp

Well-Known Member
Accessory Maker
My Plenty arrived today.:clap:NEW 151€
First impressions
Tried at Level 7
2 bowls with the reducer and AVB very light brown!
1 bowl with liquid pad method and AVB with spots of green ?? ...
Does not seem very well ...:\
At level 7 the pointer touches slightly at 200 ° C and the thermostat has been off for a few seconds.
This is normal?
note:
my greens are NOT cured yet!
 

LesPlenty

Well-Known Member
Company Rep
Oh I lost the screen on theBlack top piece?
Put a little screen in between the coil and the black piece then fill that side up too for a macro-dose, it will hold an extra .25 gram for a 1.25 gram total.:tup:

At level 7 the pointer touches slightly at 200 ° C
Your unit is working like mine, temperature wise. The drier your material the better, 60-62% humidity. Let it heat soak for a minute after the red light goes out and pull nice and slow for as long as you can, the second hit should be quite full of vapor:myday:
 

justcametomind

Well-Known Member
My Plenty arrived today.:clap:NEW 151€
First impressions
Tried at Level 7
2 bowls with the reducer and AVB very light brown!
1 bowl with liquid pad method and AVB with spots of green ?? ...
Does not seem very well ...:\
At level 7 the pointer touches slightly at 200 ° C and the thermostat has been off for a few seconds.
This is normal?
note:
my greens are NOT cured yet!
Hey if your buds are not cured you can't ask miracles to the vape.
If you don't have anything else to vape, keep in mind you are just wasting weed for the time being.
When it will be cured you will get different results, the least you indulge now, the better.
You already know it's hard. :D
 
Last edited:

ataxian

PALE BLUE DOT
Hey if your buds are not cured you can't ask miracles to the vape.
If you don't have anything else to vape, keep in mind you are just wasting weed for the time being.
When it will be cured you will get different results, the least you indulge now, the better.
You already know it's hard. :D
Da PLENTY dry is very amazing & I love H2O path.
Of many I own da PLENTY is the best 4 dry!

It works well with water however DRY as long as substance is properly CURED?
FLAVOR CITY = EFFECT 4-sure
 

O-G-Reg

Well-Known Member
Hey plenty friends! I was wondering what the concencus is on whether 18mm female or 14mm male is better to put on top of the black Cone instead of the coil?
I found some great looking glass substitute mouthpieces i think might steal a little less of the kick from my herb than the coil:
https://www.artfire.com/ext/shop/pr...iece_flared_curved_male_/handmade/accessories
Or
https://www.artfire.com/ext/shop/pr...sblower/10767441/14mm_glass_mouthpiece_female

They have a couple options for each like stright, bent, flat or open mouth and will make to any size.

As an aside, if anyone has tried using their plenty with a hydratube, I’d love to hear how that is!

Cheers!
 

LesPlenty

Well-Known Member
Company Rep
Hey plenty friends! I was wondering what the concencus is on whether 18mm female or 14mm male is better to put on top of the black Cone instead of the coil?
Nice find, I would go with the 18mm female for the least restriction and less maintenance as vapor will condense on the end of the 14mm male unit.:tup:
I would also like to hear from any long-time users of the hydra tube with a Plenty to see if they still like them or if it was just a fling as I have now been worrying about using my unit inverted on a bong.:tup:
 

ejackyou

Hamilton
My Plenty arrived today.:clap:NEW 151€
First impressions
Tried at Level 7
2 bowls with the reducer and AVB very light brown!
1 bowl with liquid pad method and AVB with spots of green ?? ...
Does not seem very well ...:\
At level 7 the pointer touches slightly at 200 ° C and the thermostat has been off for a few seconds.
This is normal?
note:
my greens are NOT cured yet!

I hope you realize you need to cycle your Plenty at least 3 or 4 times to extract the most from
your dose, each time it gets a little hotter too.
 

dzoinp

Well-Known Member
Accessory Maker
Hello guys! After a few sessions my plenty is better ... the pointer now slightly surpasses the 200c. It's working well. The greens are getting better too :brow:
I have used it with the reducer with very positive effects .
Now I'm happy with my purchase ... sometimes when I need an extra dose I'll get my Plenty.
Thanks for your comments.:rockon:
 
Last edited:

SloJimFizz

Unknown Member
Hey plenty friends! I was wondering what the concencus is on whether 18mm female or 14mm male is better to put on top of the black Cone instead of the coil?
I found some great looking glass substitute mouthpieces i think might steal a little less of the kick from my herb than the coil:
https://www.artfire.com/ext/shop/pr...iece_flared_curved_male_/handmade/accessories
Or
https://www.artfire.com/ext/shop/pr...sblower/10767441/14mm_glass_mouthpiece_female

They have a couple options for each like stright, bent, flat or open mouth and will make to any size.

As an aside, if anyone has tried using their plenty with a hydratube, I’d love to hear how that is!

Cheers!

I have a bubbler with a 14mm male similar to those in the links you posted. It mates pretty securely using the extra, longer silicone piece the Plenty came with. It does leave some of the kick and flavor the coil takes away.

I've put my reducer chamber aside lately and use the full chamber with the liquid pad on top. I seem to get a fuller extraction with a tad toaster abv than with the reducer and caps.

2wdycjp.jpg
 

O-G-Reg

Well-Known Member
I have a bubbler with a 14mm male similar to those in the links you posted. It mates pretty securely using the extra, longer silicone piece the Plenty came with. It does leave some of the kick and flavor the coil takes away.

I've put my reducer chamber aside lately and use the full chamber with the liquid pad on top. I seem to get a fuller extraction with a tad toaster abv than with the reducer and caps.

2wdycjp.jpg

Is the heat too much at 6 with that bent stem setup?

I’m not too too sensitive to heat, used to smoke bowls and that was managable with an even shorter path. Hua, maybe by my own logic, i’ve got nothing to loose!

Seems like it would also be much easier to reclaim from a glass stem, and tell when its time for cleaning.
 

SloJimFizz

Unknown Member
Is the heat too much at 6 with that bent stem setup?

I’m not too too sensitive to heat, used to smoke bowls and that was managable with an even shorter path. Hua, maybe by my own logic, i’ve got nothing to loose!

Seems like it would also be much easier to reclaim from a glass stem, and tell when its time for cleaning.

Not too hot and It makes the Plenty remind me of some of my portable convection units, just with a massive bowl with huge surface area at the end of the stem. The flavor is improved and I like the feel and control of how much I'm inhaling. I start at around 5.5 on the temp setting, temp step to 7 for the full extraction. it seems to make the weed go farther, put out more vape, or because I can't take the huge cooled down rips I do with the coil, I'm not spending it all on massive pulls.
I thought the glass stem would get red hot like the coil, but that's not the case, feels like a Tubo or Milaana with a long glass stem, hot by the load, cool the rest of the way up. I like the coil and have one on my other chamber top as well and can go back and forth. But it had dropped pretty deep in the rotation as of late, using the glass stem has ramped my Plenty usage back up.
 

Vital

Well-Known Member
Nice find, I would go with the 18mm female for the least restriction and less maintenance as vapor will condense on the end of the 14mm male unit.:tup:
I would also like to hear from any long-time users of the hydra tube with a Plenty to see if they still like them or if it was just a fling as I have now been worrying about using my unit inverted on a bong.:tup:

What size tubing do you use to connect the oustside of the Plenty to an 18mm Female?
 

ataxian

PALE BLUE DOT
It does, but I think other variables like the grind and amount are more important.
I think the abv in the big chamber with the pad gets a bit darker than a normal filled small chamber.

And yes S&B should sell those orange chamber housings by the dozens... or distribute for free.
@LesPlenty influnced me to get a PLENTY!
@vitiolo made it possible!

Never had a VAP bag?

The PLENTY is prefect for SCA!
My wife who doesn’t like the smell of CANNABIS?
She says it’s the least offensive vaporizer I own!
So I use da PLENTY most 4 that reason!
+ I’m a FLAVOR dude!
 

LesPlenty

Well-Known Member
Company Rep

bigbeancounter

FatOldSquishyGuy
Looking to pick up a plenty for a recently diagnosed friend...anyone know of any active holiday sales/codes that would get me close to Black Friday/cyber Monday prices? Appreciate the help...thx
 
Top Bottom