VAPEHUNTER
Well-Known Member
1-hole Angled carb cap order placed!!!EDIT: I wonder if i should have gone for the 2 hole version?
Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer
- Thread starter natural farmer
- Start date
1-hole Angled carb cap order placed!!!EDIT: I wonder if i should have gone for the 2 hole version?
Zangano Cruel
IG zan.cru (code) zancru (5% NV checkout discount)
How much "warm up" time should I give my V-Rod? Any thoughts on this?
If I'm using it with flower how much will extra time help? How about concentrates. Shatter? Rosin?
I haven't been giving mine all that much time to warm up and it still seems to be effective. Still can't get over the efficiency of this vape. Once I got my inhaling technique down I started getting hard hits with just a pinch of flower.
If I'm using it with flower how much will extra time help? How about concentrates. Shatter? Rosin?
I haven't been giving mine all that much time to warm up and it still seems to be effective. Still can't get over the efficiency of this vape. Once I got my inhaling technique down I started getting hard hits with just a pinch of flower.
The controller is actually set up to overshoot the programmed temperature and then it eventually settles to the desired temperature. The only reason for this is so it gets there quickly. I would say around 5 mins or so, but keep an eye on it and you'll see what i mean.
tb42091
Well-Known Member
The point is Shane seems to be a good dude who runs a solid business and coils that have the specifications needed for the VROD + dnail XLR pinout arent everywhere. Add in the fact that he is active here and it makes for a comfortable purchase
Only other place I really know of that has these coils is Vapecode/amazon. Another member just recieved his yesterday and it indeed DOES fit the VROD so that is no longer a question in case anyone is interested
buckhakeesah
Well-Known Member
Support Shane if you like quality. You will not regret your purchase. I only wish he had come out with this venture sooner. Would've saved me a lot of cash. I just picked up another of his coils in 20mm to go with my FP Wrap around.
I have only loosely followed these developments of late so excuse me for having this all wrong:
Yes, Shane of @710Coils is a remarkably nice duce who is offering the highest quality products for the lowest price to make it worth his while, which is unbeatable for the quality of his priducts and services.
But feel free to correct me here- is the main advantage to the 710 Vrod coil not- that it will work with different, standard XLR controller connections?
So that people can use the Vrod with their own, non-Newvape controller with a perfectly fitting Vrod coil, which would otherwise only be available from Newvape and would only work with the Newvape wired controller? Without an adapter cable at least.
Or did I get ths wrong?
buckhakeesah
Well-Known Member
buddingglasshead
Well-Known Member
Yup. I sent him my VROD and coil so he can properly spec it out.
Shane is a super stand up guy that helped me with stuff before he even became 710coils. He used to be "just"another one of FCs great members. The artist formerly known as mutten840.
Zangano Cruel
IG zan.cru (code) zancru (5% NV checkout discount)
imho NV controllers are ok....
The only think imo Auber has an advantage is on the rotary knob..... and auto shut-off...
the rest..... meeeee, casing looks way better the NV controller..... finish.... size.....main cord etc etc all better quality imo.... made in the US doesn't mean quality all the time....
the back connector.... the kind of XLR pins that Auber has, looks cheap and weak....
Just because the pins are different doesn't mean the rest are standard.....
I'm happy to have both controllers and see the differences by myself
Stay vaped...
The only think imo Auber has an advantage is on the rotary knob..... and auto shut-off...
the rest..... meeeee, casing looks way better the NV controller..... finish.... size.....main cord etc etc all better quality imo.... made in the US doesn't mean quality all the time....
the back connector.... the kind of XLR pins that Auber has, looks cheap and weak....
Just because the pins are different doesn't mean the rest are standard.....
I'm happy to have both controllers and see the differences by myself
Stay vaped...
Blargas541
Well-Known Member
I'm curious why nobody suggests the reverse post vrod for use with standard coils?
@Blargas541 I think a standard 20mm coil is too tall for the Vrod. They are around 15mm tall and the Vrod takes a coil around 12mm. The showerhead is the one that can handle the taller coils I believe =)
tb42091
Well-Known Member
@Blargas541
NV coils for the VROD are 15.71mm tall, and VROD coils, regardless of wrap direction need to be 15-17mm tall. There are a lot of coils out there that dont fall into those specs which is where the problem lies.
SH coil height isnt really an issue there are enough threads you could probably run a 17 or 18mm tall coil down to maybe 10mm tall it would probably still work without needing to adjust temp too much.
Per: http://fuckcombustion.com/threads/newvape-flowerpot-twax-vaporizer.23162/page-500#post-1309386
It was an answer to your post though @710Coils so you know this already
NV coils for the VROD are 15.71mm tall, and VROD coils, regardless of wrap direction need to be 15-17mm tall. There are a lot of coils out there that dont fall into those specs which is where the problem lies.
SH coil height isnt really an issue there are enough threads you could probably run a 17 or 18mm tall coil down to maybe 10mm tall it would probably still work without needing to adjust temp too much.
Per: http://fuckcombustion.com/threads/newvape-flowerpot-twax-vaporizer.23162/page-500#post-1309386
It was an answer to your post though @710Coils so you know this already
Zangano Cruel
IG zan.cru (code) zancru (5% NV checkout discount)
Quite the opposite
@Blargas541
NV coils for the VROD are 15.71mm tall, and VROD coils, regardless of wrap direction need to be 15-17mm tall. There are a lot of coils out there that dont fall into those specs which is where the problem lies.
SH coil height isnt really an issue there are enough threads you could probably run a 17 or 18mm tall coil down to maybe 10mm tall it would probably still work without needing to adjust temp too much.
Per: http://fuckcombustion.com/threads/newvape-flowerpot-twax-vaporizer.23162/page-500#post-1309386
It was an answer to your post though @710Coils so you know this already
The beauty of VRod lies on the tight tolerances.... coils need to be 17mm at least to fit ok.... no less....
12mm tall coils are for SH and WA.
Last edited by a moderator:
Baron23
Well-Known Member
Ah, Shane...I think you have that backwards. SH takes a regular 20 mm coil. Vrod coil from NV is 17 mm tall in addition to being direction of coil specific (though, they make versions for both directions).
haha...I see we have all jumped on this! LOL Run, Forest....RUUUUN! haha
tb42091
Well-Known Member
I'm just going off of the coil info @NewVape710 laid out in the above post.
I dont quite understand....if it's no less than 17mm for VROD coils then why is the one NV posted 15.71mm while saying it needs to be 15-17mm.
I have a hard time believing the owner/machinist did not show the right coil specs.
Not sure what post you are referring to but let me try and clarify this for you. The showerhead is definitely more forgiving when it comes to how tall your coil is. The Vrod is not, now that doesnt mean you cant use something less than 17mm, what it means is that the tighter the tolerance is, the more efficient it is. You def cant go above 17mm. Ideally, stay between 15 and 17mm.
Hope this helps...
Hope this helps...
tb42091
Well-Known Member
Thank you for confirming what I was saying.
I'm referring to the post I linked above from page 500 where your co-worker posted pictures of coil specs for the VROD and had said 15-17mm tall coils were needed and showed a caliper on a NV coil.
Idk if I was misunderstanding @Zangano Cruel above but it sounded like they were saying 17mm+ will only work. Which you just confirmed 17+mm will not work.
To me this was pretty simple...saw the specs, found something within the specs and bought 4
hope to be good for a while.
Zangano Cruel
IG zan.cru (code) zancru (5% NV checkout discount)
Stay vaped...
They should make some plugs so I could buy a 4 holer and make it any combination of holes by plugging and unplugging.
@newvape918
@newvape918
VAPEHUNTER
Well-Known Member
Also now available through NewVape.
Roth
Pining for the Mountains
They still are making a version just like that. Believe they're calling it the "baller cap" if I'm not mistaken. They posted about it a few pages back I believe.
Really glad to see the angled carb caps coming out, looking forward to hearing some reviews. I will probably pick one up during a Black Friday sale.