• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Discontinued Haze Square

Djsleepy

Well-Known Member
Damn that's unlucky man, maybe a firmware thing? Hopefully I have better luck since thanks to you and everyone's advice I decided to bite the bullet and give the haze a shot. Good value, cool idea and good warranty sold me on it. Picked it up at vapoworld, glad I got a couple extra coils and a mouthpiece. Hopefully mine won't be making 5 trips.

I'll let you guys know how I get on with once I get it. Expecting big things....


Don't worry first.four trips.were due.to bad pcb board on a phase.one unit....got that replaced...been solid till this ...may be piece.of.coil that is broken off....Will let you guys know what I find out...

Edit: she's going to the mothership.....:(.....
 
Last edited:
Djsleepy,

Magistra

Active Member
Bummer, dj.

I’m beginning to get the hang of my Square. The flavor cannot be beat!

So, I’m thinking of trying out some concentrates (or one, anyhow!). What is the easiest form to begin with? I do have some distillate that I put in a cartridge, or have put a tiny ball inside my Solo bowl. What is next? My dispo has wax and shatter, but I haven’t seen live resin. Which will make the least mess? Should I use the concentrate pad, sandwich it in a bowl, or both? And what temps?
 
Magistra,

ginolicious

Well-Known Member
Bummer, dj.

I’m beginning to get the hang of my Square. The flavor cannot be beat!

So, I’m thinking of trying out some concentrates (or one, anyhow!). What is the easiest form to begin with? I do have some distillate that I put in a cartridge, or have put a tiny ball inside my Solo bowl. What is next? My dispo has wax and shatter, but I haven’t seen live resin. Which will make the least mess? Should I use the concentrate pad, sandwich it in a bowl, or both? And what temps?

No need to sandwich shatter. Just place a dab on top of the concentrate pad. I suggest using 440 great temp I found.
 
ginolicious,
  • Like
Reactions: Magistra

Djsleepy

Well-Known Member
Let me tell You guys a story....about Haze CS .....so I wasn't firing and coils were melting.....reached out to Haze.....they Sent me a video on what to look for and how to fix ....now I have no need to send in and I am getting ripped as I speak..

side note.....tried my other v apes yesterday while I was down and none i mean none... Come close to the hits this beast produces.....so glad I'm up and.running.....

Thanks @Haze Vaporizers !!!!
 
Last edited:

RogueGuy

Well-Known Member
Accessory Maker
Let me tell You guys a story....about Haze CS .....so I wasn't firing and coils were melting.....reached out to Haze.....they Sent me a video on what to look for and how to fix ....now I have no need to send in and I am getting ripped as I speak..

side note.....tired my other v apes yesterday while I was down and none i mean none... Come close to the hits this beast produces.....so glad I'm up and.running.....

Thanks @Haze Vaporizers !!!!
What was the problem? Can you post the video?
 

Rolando D2

New Member
Good afternoon. I received my square yesterday and could not make any steam, the device normally functions, I expect the time to warm up but it does not seem to heat the tray where the grass is. Even at the temperature of 430 steam leaves, the herb is slightly dehydrated, seeming neither received heat. Could it be the coil that is not in contact with the tray?
 
Rolando D2,

Djsleepy

Well-Known Member
Good afternoon. I received my square yesterday and could not make any steam, the device normally functions, I expect the time to warm up but it does not seem to heat the tray where the grass is. Even at the temperature of 430 steam leaves, the herb is slightly dehydrated, seeming neither received heat. Could it be the coil that is not in contact with the tray?


Did you receive the tips brochure with yours? If not here is the link

http://www.hazevaporizers.com/images/sq-tips-3-6-v4.pdf

Start here and.report back.....
 
Djsleepy,

ginolicious

Well-Known Member
Coils shouldnt be contacting the pod. This is a convection device. Need to allow the air to heat the herb. Not the heating element.
 
Last edited:
ginolicious,

Rolando D2

New Member
Você recebeu o folheto de dicas com o seu? Se não aqui está o link

http://www.hazevaporizers.com/images/sq-tips-3-6-v4.pdf

Comece aqui e informe-se .....
Olá, eu faço esses procedimentos. Eu notei que quando eu mantenho o botão para puxar, depois de um tempo ele vibra e desliga, mas liga novamente quando eu tiro meu dedo. Depois de algumas sessões como esta, ele não fica quente mesmo na última temperatura.
 
Last edited by a moderator:
Rolando D2,

Stu

Maconheiro
Staff member
Olá, eu faço esses procedimentos. Eu notei que quando eu mantenho o botão para puxar, depois de um tempo ele vibra e desliga, mas liga novamente quando eu tiro meu dedo. Depois de algumas sessões como esta, ele não fica quente mesmo na última temperatura.
Olá Rolando D2,

Por favor escreve em inglês aqui. Pode usar tradutor se quiser, mas preferimos ler só inglês aqui. Assim, gente pode te ajudar com suas dúvidas.

Aliás, seja bem vido a FC!

(Translation: English only please)

:peace:
 
Stu,

Rolando D2

New Member
[QUOTE = "Stu, cargo: 1314401, membro: 3025"] Olá Rolando D2,

Por favor escreve em inglês aqui. Você pode querer usar, mas preferimos ler tão bem aqui. Assim, como pessoas podem ajudar com suas dúvidas.

Aliás, seja bem vido a FC!

(Tradução: apenas em inglês, por favor)

: paz: [/ CITAR]

Eu faço esses procedimentos. Eu tenho uma pergunta sobre segurar o botão de energia, quando eu o seguro para puxar, depois de alguns segundos ele vibra e liga e desliga antes de eu terminar de puxar. Isso é normal? Neste manual diz para segurar o botão durante toda a fase de puxar. Desculpe pela tradução e obrigado.
 
Last edited:
Rolando D2,

caspargomez

New Member
Got my haze in today as well. Didn't get a chance to do anything with it but first impressions are good. Smaller than I though, and way heavier and more solid feeling, I really like the form factor. Can pretty much palm it. Finishing is a little rough in places but no biggie. Don't think I got any tips manual. Hopefully I can get a chance to play with it this weekend and report back!
 
caspargomez,
  • Like
Reactions: Djsleepy

Haze Vaporizers

Well-Known Member
Manufacturer
Got my haze in today as well. Didn't get a chance to do anything with it but first impressions are good. Smaller than I though, and way heavier and more solid feeling, I really like the form factor. Can pretty much palm it. Finishing is a little rough in places but no biggie. Don't think I got any tips manual. Hopefully I can get a chance to play with it this weekend and report back!
Here is the manual below. We are about to post few videos as well including the microdose videos.

http://www.hazevaporizers.com/images/sq-tips-3-6-v4.pdf

P.S: I will get to PMs by this weekend.
 

caspargomez

New Member
Thanks man, I'll keep an eye out for the videos should come in handy. If it performs as good as it feels you're on to a winner. Haven't bought a vape in a while and I'm excited this one might actually deliver
 
caspargomez,

Haze Vaporizers

Well-Known Member
Manufacturer
Thanks man, I'll keep an eye out for the videos should come in handy. If it performs as good as it feels you're on to a winner. Haven't bought a vape in a while and I'm excited this one might actually deliver
My pleasure. It will have a learning curve at first use but if you pack tight and as explained. If you draw slow and keep your finger pressed while drawing, you should get massive clouds even af low temps. If any questions, please PM me.
 

Djsleepy

Well-Known Member
Ran some sherbet cookies thru last.night.....wow! I was extracting diff .Terps/flavor every 10 degrees starting at 330.....absolutely the best experience yet withthis.device.....not to mention how ripped i was all night......:mmmm:
 
Djsleepy,
  • Like
Reactions: Magistra
Top Bottom