• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Dabpress Rosin Plates

invertedisdead

PHASE3
Manufacturer
Yeah that's why you want to puck it into a solid piece of hash first before trying to really juice it. I usually try and squeeze it a bit once its in the bag to suck up extra room where it could quickly expand. There's a Pure Pressure video where they apply a bit of pressure, then release completely, and then ease back into it. Blow outs with hash definitely suck, if you can get a nice little brick going it should be a bit easier to juice in my experience.
 

superdang9000

Flameo Hotman!
@invertedisdead Okay, I'll try that next time. I did squish it into a huge brick beforehand, but obviously had to break it up to get it into the bags. I'll try forming it more in the bag. Would it be worth trying bottletech with cylinder pre-press with hash? Or maybe investing in something like a 2x4 prepress for horizontal squishes like I was doing?
 

invertedisdead

PHASE3
Manufacturer
I've done bottle tech hash squishes but I like to do square pucks for hash and do directional folds. I like bottle tech for flower. I don't think it works as well to go that tall vertically when pressing hash.

The 2x4 could be good for hash, load the bag and put it in there and give it a nice pre-press. I have the 2x4" but not any hash on hand or I'd try it for you lol.
 

psychonaut

Company Rep
Company Rep
I hope ya'll are getting yer squish on this weekend, I've got out of town company so discreetly hitting some distillate in my pen and in desperate need of squishing some daytime meds! Dosing some 50mg rosin cannacaps in the meantime, keeping medicated.

Thanks for yer hash pressing expertise @invertedisdead, I owe ya a dab one of these days!
 

superdang9000

Flameo Hotman!
@invertedisdead Thanks again for your insight, you're a wealth of information as always! Fortunately I have much more material on the way so I'll get it right eventually... maybe. :science:

On a related note, @psychonaut do you happen to know when the 2x4" pre-press molds might be back in stock? I know there's a lot going on at the moment and I'm by no means in any rush, just curious.
 
Last edited:

invertedisdead

PHASE3
Manufacturer
I hope ya'll are getting yer squish on this weekend, I've got out of town company so discreetly hitting some distillate in my pen and in desperate need of squishing some daytime meds! Dosing some 50mg rosin cannacaps in the meantime, keeping medicated.

Thanks for yer hash pressing expertise @invertedisdead, I owe ya a dab one of these days!

I owe you three! :cheers:

And those cannacaps are no joke! :rockon:
Those disty pens are just so easy to hit EVERYWHERE! Instant convert, rosin at home, pen on the go, it's a no brainer!
 

Hogni

Honi soit qui mal y pense
Only experience I have with Black Label paper is trying to find the stuff.
I've not seen anyone in UK/EU with the 10cm squares of 55lb :(
I think ideally I'd like the 5"x9"

Thickest paper I've managed to find was 70gsm, which is 60gsm paper with a 10gsm coating and it comes in 25m rolls, just over 1m wide.

I think 55lb is the equivalent of about 100gsm

Following our convo about this topic, I found this retailer for BL in Germany.
They also have parchments from Oil Slick and Raw in stock. Perhaps worth a comparison?
 

ColoVaper

Science...Whoo!
Caught up on this thread and now I need a press. I live in Denver and am sick of the crap dispensaries sale but it’s so damn cheap. Every time I get rosin it’s all I want but it’s expensive in the store. My regular place just got bought out and is horrible now. I only used them for concentrates. My buddy grows and I have access to some of the best flower on earth. He has an amazing green thumb and keeps trying to give me equipment to grow myself even. I want a 10 ton all in one because I go through a lot. I can’t decided to either pull the trigger on the SS or wait for the bottle jack 10 ton coming out next month? I don’t really have space for a floor model and my garage gets below freezing for days in the winter, which I assume would not be ideal and generally suck...no doubt I want a press from Roger!

Also, if I went with the Strongway pump with gauge, would I need a special adapter? I saw it was mentioned the standard coupling was going to change at some point?
 
Last edited:

psychonaut

Company Rep
Company Rep
I want a 10 ton all in one because I go through a lot. I can’t decided to either pull the trigger on the SS or wait for the bottle jack 10 ton coming out next month? I don’t really have space for a floor model and my garage gets below freezing for days in the winter, which I assume would not be ideal and generally suck...no doubt I want a press from Roger!

Also, if I went with the Strongway pump with gauge, would I need a special adapter? I saw it was mentioned the standard coupling was going to change at some point?

Welcome!

In your situation if you dont have the space for a shop press I'd suggest any of our all in one units depending on how much you plan on pressing.

The 10 ton bottle jack unit will take up less space as the pump with the hose is a lil bulky if you're in tight quarters. The hr10t35 is a really capable unit but if you're interested in drip tech it'd be worth the wait.

The coupler that attaches the strongway pump to the hr10t35 cylinder can be purchased from grainger, the current fitting is a NPT 3/8". The strongway is a 1/4" ZG male. We will be including the strongway compatible coupler with our hydraulic cylinder presses sometime later this month.

The cost on any of the bottle jack units is going to be the more affordable way to go, if overall price is a point.
 

ColoVaper

Science...Whoo!
Welcome!

In your situation if you dont have the space for a shop press I'd suggest any of our all in one units depending on how much you plan on pressing.

The 10 ton bottle jack unit will take up less space as the pump with the hose is a lil bulky if you're in tight quarters. The hr10t35 is a really capable unit but if you're interested in drip tech it'd be worth the wait.

The coupler that attaches the strongway pump to the hr10t35 cylinder can be purchased from grainger, the current fitting is a NPT 3/8". The strongway is a 1/4" ZG male. We will be including the strongway compatible coupler with our hydraulic cylinder presses sometime later this month.

The cost on any of the bottle jack units is going to be the more affordable way to go, if overall price is a point.

Awesome thanks for the clarification I understand now fully the hose connection.

Man this is a hard choice to make. I love the SS press with the strongway to free up a hand pressing but I love the ideal of the drop tech! We’ll see if I can hold out on the upcoming release or get the SS haha!

I just bought some rosin earlier that looked so magical but it was almost like someone pressed it from a plant that wasn’t proplerly flushed or something. Tasted like vitamins or chemicals? Wished I saved the money for my press! Ever since recreational has taken over it feels like medical is a second thought and I won’t pay $90 a gram on the rec side!
 

psychonaut

Company Rep
Company Rep
Awesome thanks for the clarification I understand now fully the hose connection.

Man this is a hard choice to make. I love the SS press with the strongway to free up a hand pressing but I love the ideal of the drop tech! We’ll see if I can hold out on the upcoming release or get the SS haha!

I just bought some rosin earlier that looked so magical but it was almost like someone pressed it from a plant that wasn’t proplerly flushed or something. Tasted like vitamins or chemicals? Wished I saved the money for my press! Ever since recreational has taken over it feels like medical is a second thought and I won’t pay $90 a gram on the rec side!

We will have both bottle jack and cylinder hydraulic presses with drip-tech, so if you have a preference (separate pump with gauge vs bottle jack), both will be covered.

If you are close to a Maggie's Farm dispensary (CO Springs/Pueblo area), I've squished probably 15-20 different strains from them, all clean green organic certified flower, all but a couple were great yielders. I can't recommend them enough.

I had a nice golf ball sized nug that was given to me last Easter from my adopted son, the rosin it made was so horrible tasting it went straight into the garbage. No clue how the buds were grown but I am guessing like you mentioned, wasn't cared for properly.
 
Last edited:

ColoVaper

Science...Whoo!
We will have both bottle jack and cylinder hydraulic presses with drip-tech, so if you have a preference (separate pump with gauge vs bottle jack), both will be covered.

If you are close to a Maggie's Farm dispensary (CO Springs/Pueblo area), I've squished probably 15-20 different strains from them, all clean green organic certified flower, all but a couple were great yielders. I can't recommend them enough.

I had a nice golf ball sized nug that was given to me last Easter from my adopted son, the rosin it made was so horrible tasting it went straight into the garbage. No clue how the buds were grown but I am guessing like you mentioned, wasn't cared for properly.

Awesome man! It’s probably better I wait a bit to buy one anyways. We are in the starting stage of a kitchen remodel, which I’ll need one for too...I guess haha. The wife is pumped but always the budgeter!

I can always make a trip down to the Springs for some bud and get some bbq from Rudy’s too! I actually stopped by my old dispensary last night and the manager I’ve become friends with over the years gave me a list of places he personally loves. He said the new company that took over Saturday stuff is horrible when he saw it at their other location. It’s a bittersweet end for the employees and customers!

There’s just so many options it’s overwhelming to find a new place. I used to blast my own but it’s illegal to do in Denver nowadays. Bho is also probably horrible for you. So I’ve been eyeing pressing for probably 5 years but it wasn’t something possible on the scale I consume for the cost of the machinery I needed/wanted. Thanks to Roger I can now seeing it being something I can and want to do. Also to get the results I want!
 

psychonaut

Company Rep
Company Rep
Awesome man! It’s probably better I wait a bit to buy one anyways. We are in the starting stage of a kitchen remodel, which I’ll need one for too...I guess haha. The wife is pumped but always the budgeter!

I can always make a trip down to the Springs for some bud and get some bbq from Rudy’s too! I actually stopped by my old dispensary last night and the manager I’ve become friends with over the years gave me a list of places he personally loves. He said the new company that took over Saturday stuff is horrible when he saw it at their other location. It’s a bittersweet end for the employees and customers!

There’s just so many options it’s overwhelming to find a new place. I used to blast my own but it’s illegal to do in Denver nowadays. Bho is also probably horrible for you. So I’ve been eyeing pressing for probably 5 years but it wasn’t something possible on the scale I consume for the cost of the machinery I needed/wanted. Thanks to Roger I can now seeing it being something I can and want to do. Also to get the results I want!

We'll have a press in both you and your wife's budget when you're ready =) You're right on the BHO, but it's illegal to produce in the entire state of Colorado without a license. There's some great BHO out here but there's just something special about producing your own oil, a level of intimacy we all deserve.

One thing on the AIO units, you can just move it around so dont need a separate rosin press in your kitchen, just need an appropriate work space. A 2x4' table top works good for the hydraulic cylinder presses with pump, 2x2' would be minimal, all the bottle jack units fit on 2x2'. The stainless steel unit would be better suited for kitchen use as the bottle jacks are shop equipment.

Just make sure you bring a med card with you to the springs, otherwise gotta hit up the maggies an hour south in Pueblo. Great buds though, seriously I can't recommend them enough. I was getting 20-25% yields at 200F on most of their sativa dominant cultivars. Their Strawnana varieties are exceptional, and the cuvee is very unique (mint cherry), the DJC and scouts honor are also very good. Truth varieties if you like some jamacian landrace.
 

ColoVaper

Science...Whoo!
We'll have a press in both you and your wife's budget when you're ready =) You're right on the BHO, but it's illegal to produce in the entire state of Colorado without a license. There's some great BHO out here but there's just something special about producing your own oil, a level of intimacy we all deserve.

One thing on the AIO units, you can just move it around so dont need a separate rosin press in your kitchen, just need an appropriate work space. A 2x4' table top works good for the hydraulic cylinder presses with pump, 2x2' would be minimal, all the bottle jack units fit on 2x2'. The stainless steel unit would be better suited for kitchen use as the bottle jacks are shop equipment.

Just make sure you bring a med card with you to the springs, otherwise gotta hit up the maggies an hour south in Pueblo. Great buds though, seriously I can't recommend them enough. I was getting 20-25% yields at 200F on most of their sativa dominant cultivars. Their Strawnana varieties are exceptional, and the cuvee is very unique (mint cherry), the DJC and scouts honor are also very good. Truth varieties if you like some jamacian landrace.

Yeah I miss making my own oils. I haven’t in a couple years. I used to make some awesome stuff before there was live resin. I didn’t realize...maybe I did but forgot, that it was statewide. I’m just used to Denver’s crazy rules.

I don’t leave home without my med card though. No reason not to have one if you like to dable in the finer things Colorado has to offer! I’ll have to head down and check it out soon for sure. I haven’t been down there in awhile too! I think last time was about a year ago to take the Jeep out on some trails near the Broadmoor.

I hope I can hold out on a press for a bit. I might pull the trigger on that SS one if I get a wild hair! I don’t even know if I would use the drip trek but it sounds awesome!

Thanks you for the help and I’ll be watching this tread for sure!

Also this is that stuff that taste gross but looks great and smells awesome!?!?

2r22iht.jpg
 
Last edited:

ColoVaper

Science...Whoo!
What are you using for a vaporizer? Have you tried lowering the temperature of your vape?

Oh man I got issues...I have so many things I vape with regularly. My go to is a nectar collector and what I have tried this stuff on. I have maybe 5 of them...all from Utah/Colorado. I also use and love the honey badger daily. I also have two enails paired with a couple size mobius bubblers. Gotta have one for each floor of the house. I know I got problems haha. I’m not much into skillet vapes I have a older version of the donut one everyone loves here but haven’t used it in awhile. You should see my coffee table some years on 420 if I manage to get it off work! I’ll just bust out everything I can find haha. But to answer you, yeah I’ve tried it low temp. I think it was just a bad place I got it from. Sorry to go off topic!
 

psychonaut

Company Rep
Company Rep
We are finishing up assembling the bj3t33 units now and should have the product available from the official webstore next week.

This unit will also be offered in a bundle along with our dp-pm3015r cylinder pre-press mold and 40pc 160u rosin filters for $429.

This AIO rosin press is designed for 3.5-7g of buds.
 
We are finishing up assembling the bj3t33 units now and should have the product available from the official webstore next week.

This unit will also be offered in a bundle along with our dp-pm3015r cylinder pre-press mold and 40pc 160u rosin filters for $429.

This AIO rosin press is designed for 3.5-7g of buds.
Is that the smallest one you were mentioning a month or so ago?
 

psychonaut

Company Rep
Company Rep
Good morning FC!

dp-bj3t33 is now available on the official webstore! The price as promised is $399 for the AIO unit itself.

https://www.dabpress.com/collection...rosin-heat-press-machine-driptech-intergrated

We are shipping a container to US with a large quantity of this model rosin press which should reach US warehouse in 20 days. In the meantime customers can purchase from the official webstore and use DHL Worldwide Express shipping for speedy transit around the globe.

dp-bj3t33 -

rosin-press-cheap-dab-press-machine-for-sale_1024x1024.jpg


Choose to bundle this press with the cylinder pre-press mold and rosin filters for $449

We also have a Pro version of this press which utilizes a dual PID system like our standard rosin plate kits to control temperatures of each platen independently. This unit is $50 more at $449.

https://www.dabpress.com/collection...-ton-hydraulic-jack-rosin-press-dp-bj3t33-pro

dp-bj3t33 Pro -

dabpress-small-rosin-press_1024x1024.jpg


Have a great day!
 
Last edited:

dabpress.com

Well-Known Member
Manufacturer
Hello, my friends,

Apology to not come here to answer questions in time.

As you see, our Amazon Listing caused some issues and I'm trying to reinstate it, It made me upset.

Meanwhile, I have to spend more time on new products.

Here is 3-ton small driptech rosin press available right now

$399 free shipping to North America, Europe Union, Australia, UK, and New Zealand.

including free combo ( cylinder pre press mold + 40 packs rosin filters | 160 microns) to my FC friend.

[ Get a free combo before buying at the end of this month)

Thank you all

5cc2lxy.jpg
















Features:

  • Driptech Integrated - Maintain Rosin to Fall Immediately onto Cold Surface below for Terpene Preservation.
  • Accurate Temp Detected - Separated Heating Rods & Sensors for Getting Accurate Temp
  • Good Alignment Performance - Power Frame Made of 6061 Aluminum, Hard Stainless Steel Sticks, and Linear Bearings to Guarantee Certain Movement.
  • Replaceable Bottle Jack - Replacing the Same Tonnage Bottle Jack to Keep Long Working Time.
  • 1,000 PSI Delivered - Works Great to 3.5-10g Material Paired with Bottle Tech Styled Rosin Mold - 2x3", 2x4",2.5x4.5" are the Suggested Size Filters for Use.
  • Best Insulation Performance - Dual Insulation Layers Allows the Rosin Press Plates to Reach 200 F in 5 Minutes and Protect the Machine from Heat-draining.
  • Small Manual Rosin Press - Easy to Move and Operation at Apartment, Plug & Play.



Tips:

  • Only Top Platen Temp Detected ( 2-3 degree difference )
  • Less 5 Ton Replacement Bottle Jack Is Accepted
  • A focus of Pressing 3.5-7g Materials
 
Last edited:
Top Bottom