Cheap High Quality Bubbler

LabPong

Well-Known Member
The D020-D is also small in comparison. The side cars and also (same with diff mouthpiece) the D020-9 is much bigger in volume but not much taller at all. I like both the D020-D for my smaller vapes and the D020-9 for my powerful vapes like the Elev8r and Flowerpot.
 

LesPlenty

Well-Known Member
Company Rep
d020 I can see has a diff style perc....is the d020-d/mobius matrix a better style?
I have all 3 of these and they all have different percs, the D020-d is my Goldielocks pick as it is in the middle size wise and resistance wise too, for me anyway. I would skip the D020 and go for the D020-d, unless you only want it for a powerful vape that needs restricting a little, like my Plenty, the sidecar mobius knock off shines the brightest with this vape only, for me.
 

YetAnotherUsername

Youngster vaporist
I have the D020-d and a VapeExhale hydratube knockoff. Now I'm looking for a mini rig with the female glass joint on the bottom of the piece - I want the vape bowl to be facing upwards when in use, so oil does not drip inside the device.

Has anyone seen any rig like that except for the VapeExhale knockoffs? Those are rather big...

Thanks!
 
YetAnotherUsername,

Pyr0

Stoned Roses
This little GB-379 bubbler arrived today from Yingmin5 on DHgate:
https://imgur.com/a/ac3rBZK

I'm quite pleased overall, but the description on DHGate is contradictory.
The listing shows 12 inch height and also shows the joint size to be both 19mm and 14mm.

The actual height is just under 9 inches and the joint is 14mm.

Either way, I like the colours and I'm looking forward to trying it this evening.
 

bizwaxzion

Enigmatic Cannabist
How's the 14mm joint? I just picked up a piece from Yingmin5 and the joint is not round causing whatever is in there to rock back and forth. It also leaks a bit. No response from seller yet - altho, they were very responsive when I asked questions. The rest of the piece is pretty nice, but the crappy joint makes this thing garbage.
 

Pyr0

Stoned Roses
The joint seems ok on this piece. It seems to get a good seal with my flowerpot bowls or drop downs.
I guess there is a very slight wiggle, but not enough to concern me.

I really like the piece so far.
It's quite a smooth purr, hardly any change of getting water in my mouth, and little to no blowback.
 

bossman

Gentleman Of Leisure
I'm looking to get a second bubbler to add to my D020. The D020 serves me well; I'm just indulging. I guess something that rips flower well with the Tubo X would be my top priority.

I'll be using it with the usual suspects:

Tubo X
Solo II
Fury 2
OmniVong
Splinter
Fierce once it arrives
 
Last edited:
bossman,

LesPlenty

Well-Known Member
Company Rep
I like my D020-d better than my D020 in a few different ways, a little bit thicker glass, a bit bigger mouth piece flare and a smoother perc action, that being said, I have only been using my FC-Mod for the last couple of weeks,
https://www.dhgate.com/product/2015-new-34-5cm-height-glass-bong-with-matrix/255741536.html
rBVaJFkP2jGAYdW1AAeKZ6SgNlY955.jpg

I have been using it with a different mouthpiece, better when sitting in a recliner,
https://www.dhgate.com/product/19cm-long-glass-mouthpiece-female-18mm-flared/408547912.html
19cm-long-glass-mouthpiece-flared-end-vapexhale.jpg

One of the best features of this set up is being able to pull it apart and put it in the dishwasher each night to clean, too easy.
You can also swap the percs around to change things up!
The ashcatcher also works well with a sherlock J-hook.
I mainly use it without the asscatcher most of the time.
Another good point is if you accidentally break something, you can purchase most parts separately.
 

Hogni

Honi soit qui mal y pense
Same as me. Have mine nearly exclusivly in use since 3 months. But w/o the ash catcher. That setup is too much for my liking. Love bubblers with seperate components you can mix and match. It delivers much more diversitiy - and replacement is cheaper in case of an accident. Similar as the Sheldon Black (clone). Suggested to Steven to offer some more other shaped mps. Unfortunately he offered the angled one only, you have pictured. Wanted some other, smaller mp tips too, snake heads and so on, the stuff @ataxian likes so much.
 

LesPlenty

Well-Known Member
Company Rep
But w/o the ash catcher
Me too, I hope to use the ashcatcher with my j-hook more, once my keck clips show up!
I have been looking at that Sheldon knockoff too.
@Nina I highly recommend it for your collection, once funds allow.
Also, the perc`s in my piece sit really low compared to the pictures.(which is good)
 

LesPlenty

Well-Known Member
Company Rep
If the D020-d was as easy to maintain as the FC-mod or had a decent bend in the neck, it would be my daily driver, but the FC_mod + interchangeable parts + dishwasher maintenance gets the win, by a hair!
That being said, I have contacted Yingchin5 about getting the following with a very pronounced bend in the neck of it so it is easy to use while reclined, it is a great cheaper unit, it does not say it is a D020-d, so maybe it`s a knockoff of a knockoff(pics look identical) ;

https://www.dhgate.com/product/new-...ng-glass-smoking/199386677.html#mfavit-7-null

rBVaSVtHBJqANy1oAAFjbTLVmcE546.jpg

He told me to just leave a message when I buy, he said to say,` Make sure it has a good bend in the neck' and they would pick the appropriate one for me. If you are going to use on a table etc, forget what I just said.:tup:
The FC-186 would shine with something like a Plenty or Newvape Vrod/SH, more free flowing vapes, that is just a guess, I have the same perc but a single in my sidecar and that is what I am working off.
 
Last edited:

LesPlenty

Well-Known Member
Company Rep
now you have me choosing between this and a d020-d...lol
It is exactly the same, well as close as handmade stuff can be, the one I pictured above has the same perc as mine, only difference, mine has an almost straight neck, go on get it and if you are anything like me, you will purchase more before it even arrives. I did this for the first half a dozen, I am slowing down a bit now.
With the money you save getting the cheaper option, I would definitely invest in this as well;
https://www.dhgate.com/product/14mm-and-18-8mm-clound-buddy-y-adapter-with/410261424.html
14mm-and-18.8mm-clound-buddy-y-adapter-with-plug-style-carb-male-to-both-female-joint-for-water-bongs.jpg

I could not imagine not using one of these again, too civilised, a must have IMO. You have to buy 2 but that is good for experimenting/whitey making.
 

Phenix

Well-Known Member
1@felon167inc mind linking me? there are some offers right now is there something one of you likes to use personally on sale now?

i want to setup a bed-vape. recommendations for glass? whip is safer. so fc187/186/ufo. !?? "whats up with the gb186 from sunshinestore? help js appreciated 2
 

Gonzo_Dabs

Well-Known Member
I have a Grav labs hammer bubbler. I love it. Big enough to be a good hitter but small enough and with a simple shape that it's portable and easy to store. The little diffused downstem is nice for a small piece. I've had it for a couple years as my only piece and it's been awesome.

Now it's time for some larger pieces for the house.
 

D32320

Noob Saibot
I'd like to see a vid - I've had that piece on my favorite list for a while. @D32320, what vape will you be pairing with it?
Right now just using the old banger and torch, with a quartz insert. I figured since I’m already ordering, I might as well get the new opaque bottom style banger and insert. I have a Saionara Atomizer that I would love to play with if I got the right adapters.
 

bizwaxzion

Enigmatic Cannabist
I think you will like it for banger use - should be a nice little jammer. I've got a handful of china bangers, but I've been using a 710coils opaque banger for the last couple weeks and like it a lot.
 
bizwaxzion,
  • Like
Reactions: Hogni
Top Bottom