The ELEV8R from Elev8 Vehicles

Want to try it out?

  • Yes

    Votes: 19 22.1%
  • Hell Yeah

    Votes: 55 64.0%
  • No, thank you

    Votes: 12 14.0%

  • Total voters
    86
  • Poll closed .

LabPong

Well-Known Member
Come on Monday!

No need for a glass screen unless you do nugs or big huge grind. Normal grind will fall through no matter what if you do not use a screen. So.....don't use a glass screen in bowl design and allow much more air flow with less cleaning. I have found this to be the problem with the different glass screen designs. I always have to put a screen in them if I do a normal medium or finer grind.

Though you get 100% glass taste......I have not yet been convinced that a glass screen of any sort will be better than just an open bottom bowl with a SS screen in it.
 

Mozy

Solo II, Flipbrick, Elev8r
Gonna try to put in some “Black Kush” hash around thursday/wednesday. Its by far the strongest product I can get in the region(45% thc & 16% cbd, most weed I buy is tested at 18-20%) and im curious how the elev8r will handle it. My solo 2 does fine with hash. I only use it with WPA so its upside down, first at 220 celcius then a stir then again at 220. Screen gets clogged tho.
 

LabPong

Well-Known Member
Gonna try to put in some “Black Kush” hash around thursday/wednesday. Its by far the strongest product I can get in the region(45% thc & 16% cbd, most weed I buy is tested at 18-20%) and im curious how the elev8r will handle it. My solo 2 does fine with hash. I only use it with WPA so its upside down, first at 220 celcius then a stir then again at 220. Screen gets clogged tho.

I only use my arizers upside down as well....they do straight kief and hash well. I use a screen in the wpa's for everything and never have an issue. The non-flower additives will cause some sticky residues...but well worth the small but easy clean afterwards.

Your elev8r is going to rock that high powered goodness well! That will be some session for sure.....let us know how it went after you get back to the planet.....:argh:
 

ViCKi LEEKX

Fuck Vaporizer Combustion
Please forgive the stupid question, but is this torch-only or can it be used with a coil + PID controller?
 
ViCKi LEEKX,
  • Like
Reactions: BigJr48

Simple10

Member, you member riiiight?
Got my elev8r the other day and after a few nightly sessions I said to myself wow, why didn't I get this sooner! :whoa:
I do get huge hits equivalent to the FP when I heat all the inner cone crevices for 40-45s, using a Liba culinary torch. But the elev8r has a major advantage in that it's the least messy vape I've ever used.

With most vapes you have to stir an open bowl, risking some material spilling over. With the elev8tr your bowl remains covered so you can pull off some quick shake and rips and not have any crumbs on the table when you're done! Like Martinis, shaken not stirred is the way to go :lol:
This vape is perfect for beakers or such waper pipes with a 45d angled joint.


2e3a1e9.jpg

This is the vape that beaker bongs deserve :D:haw::science:
 
Last edited:

cascades

Active Member
That would be an excellent question to be settled by a blind taste test. My guess here: about 5% of the population could detect a difference in a blind taste test.
My guess is there are some minor, chemical differences involving reactions catalyzed on the SS screen, but it will be a while before we really understand what(if any) difference that makes.
Come on Monday!

No need for a glass screen unless you do nugs or big huge grind. Normal grind will fall through no matter what if you do not use a screen. So.....don't use a glass screen in bowl design and allow much more air flow with less cleaning. I have found this to be the problem with the different glass screen designs. I always have to put a screen in them if I do a normal medium or finer grind.

Though you get 100% glass taste......I have not yet been convinced that a glass screen of any sort will be better than just an open bottom bowl with a SS screen in it.
 
cascades,

LabPong

Well-Known Member
Got my elev8r the other day and after a few nightly sessions I said to myself wow, why didn't I get this sooner! :whoa:
I do get huge hits equivalent to the FP when I heat all the inner cone crevices for 40-45s, using a Liba culinary torch. But the elev8r has a major advantage in that it's the least messy vape I've ever used.

With most vapes you have to stir an open bowl, risking some material spilling over. With the elev8tr your bowl remains covered so you can pull off some quick shake and rips and not have any crumbs on the table when you're done! Like Martinis, shaken not stirred is the way to go :lol:
This vape is perfect for beakers or such waper pipes with a 45d angled joint.


2e3a1e9.jpg

This is the vape that beaker bongs deserve :D:haw::science:


NICE! Glad you jumped on this train Batman!



No word on the quartz! Can't find anything on the 7th floor site........
 

LabPong

Well-Known Member
No, I hope not. I think they were talking about the whole unit with the quartz heater, not just the heater.

wow...cool beans then......I was prepared to pay $50 for quartz if I had to....I need an Elev8r that will last me long into the future...as it is used daily. I LOVE THIS Vape...BEST IN THE WORLD!
 

hopla

Well-Known Member
where the f... did Monday go?
(i'm in Europe it's almost Tuesday here)
I think i'll buy one too, just got to understand what the differences are with the regular one (that is 99$ now on their site instead of 127$)
 
hopla,

7thFloorVapes

Well-Known Member
Company Rep
Hey Guys & Gals-

Just put the final touches on the ELEV8R Heater page at 7thfloorvapes.com Everything should be ready to go! For everyone who already owns an ELEV8R, we have made a coupon code to help alleviate the cost by 50%! Shipping starts Friday 8/10/2018

Here is the pricing for the new quartz heater (will change):

Single Quartz Heater: $40 (Use code "QuartzELEV8R" for 50% off ending 8/20)
Quartz Kit: $99 for a limited time only (8/13)

Don't forget, you can get an all-glass ELEV8R upgrade (kits only) for only $20!

Ride the Wave!

Alex T

where the f... did Monday go?
(i'm in Europe it's almost Tuesday here)
I think i'll buy one too, just got to understand what the differences are with the regular one (that is 99$ now on their site instead of 127$)
Hey!

The other is a borosilicate version which has lower thermal resistance than the quartz version. I would take advantage of this sick deal now before time is up! Don't forget to check out that all glass version for only $20 upgrade. Thank you for your support. Ride the Wave!
 
Last edited by a moderator:

hopla

Well-Known Member
You're quite the sale man (/woman?)!
i'll go and buy one!!!
F.. Combustion and F.. the V.A.S. too at that point :rockon:

edit: done! and with the coupon SFV15 you save 15$ more (and Fedex for international is 27$ so it helped a little bit, as i may have customs to pay too...)
Thank you so much 7thfloorvapes, first time i'll try one of your products and i'm sure i'll be blown away!
:science:
 
Last edited:
hopla,

MAbud

Well-Known Member
Hey Guys & Gals-

Just put the final touches on the ELEV8R Heater page at 7thfloorvapes.com Everything should be ready to go! For everyone who already owns an ELEV8R, we have made a coupon code to help alleviate the cost by 50%! Shipping starts Friday 8/10/2018

Here is the pricing for the new quartz heater (will change):

Single Quartz Heater: $40 (Use code "QuartzELEV8R" for 50% off ending 8/20)
Quartz Kit: $99 for a limited time only (8/13)

Don't forget, you can get an all-glass ELEV8R upgrade (kits only) for only $20!

Ride the Wave!

Alex T

Alex,

How do I order the all glass WP piece? The one I have came with an SS screen. I’d much prefer the full glass airpath
 
MAbud,

7thFloorVapes

Well-Known Member
Company Rep
Alex,

How do I order the all glass WP piece? The one I have came with an SS screen. I’d much prefer the full glass airpath
Once on the ELEV8R Page, scroll down just a little to the "all glass option". We have already had 5 ELEV8R Kit orders come in! Looks like the VAS is real.

If anyone has any questions at all, let me know!

Would anyone be interested in an AMA from the man, the myth, the legend himself....Steve K the founder of 7th Floor Vapes?
 

MAbud

Well-Known Member
Once on the ELEV8R Page, scroll down just a little to the "all glass option". We have already had 5 ELEV8R Kit orders come in! Looks like the VAS is real.

If anyone has any questions at all, let me know!

Would anyone be interested in an AMA from the man, the myth, the legend himself....Steve K the founder of 7th Floor Vapes?


Right. But I already have a full kit. It’s just the WP attachment I have takes a screen. Can I order just the quartz heater and a WP attachment that has the glass screen instead?
 
MAbud,

virtualpurple

Well-Known Member
I’m not sure if I want to get the all glass kit or the standard quartz kit to be honest. I’d like to take advantage of the savings but I also like to hear feedback about the function first. I have had poor experiences with glass screens (from other manufacturers) where I still found too much herb finding its way into my mouth, which defeats the purpose for my personal experience.

@7thFloorVapes what grind consistency would you say the all glass version can provide the ideal experience? I know that ideal is very subjective but if I were to clarify what my ideal experience is I would say that My experience is best when I am able to draw nice and deep without having material pass through into my mouth. What sort of grind consistency would allow for that sort of experience in your estimation?
 
virtualpurple,

LabPong

Well-Known Member
7th Floor...I had just ordered a quartz heater and a few other items before you posted here about the 50% deal. Order #7V022360

Also, do you offer the "all glass bowl" by itself?

I also sent an email.
 
Last edited:

highasakite

Well-Known Member
I doubt the glass heater would explode in your face if it is cracked when you use it...but anything can happen. It will probably fall apart from physical movement first if it has a crack in it.

Having the heat so close to your face is one reason why I use drop downs. The added plus of keeping the water unit cleaner longer is one of the biggest plus's otherwise. It may also make your water unit work better.


DHGATE SOURCE


rBVaR1pBxk6ADtiLAAD1F-sLKFI448.jpg
This is a great idea, so I ordered one the day after you posted. I usually use water in my Mothership Fab Egg CCG DHgate special for a little chug (helps pull a little slower to build the vapor). Got it in under 2 weeks, but I noticed it was broken just after I unwrapped it from all the bubble wrap. :ugh: So I told them and picked the option to have another one sent. Then a few days later, I got an email saying I would be refunded. I guess I need to make another order...grrr

The quartz heater deal looks great! LabPong, you must have been refreshing like crazy. I saw it on their site just after you guys said it wasn't available yet and was going to post a message here. At that same time, the 7th Floor guys posted. Great customer service! I am also interested in their response to the glass bowl/screen questions.
 
highasakite,
Top Bottom