• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

howie105

Well-Known Member
i didn't think about a whip as I thought one of the big advantages of the e nano was its glass path.
Good to know!
I took the long stem option, so I am not worried about the heat, I was curious about a simpler way to add filtration than a bong (also on its way) and therefore I was looking for a potential compatibility with the Arizer bubbler.
;)

I am back home and was able to get to to my Solo 1 stem and Nano WPA so I can now confidently say the straight solo stem is too shallow and large to fit directly onto the Nano. However with the old piece of whip tubing fudge it works OK. https://i.imgur.com/9hbFXIA.jpg Sorry about the crappy photo but I am a crappy photographer.
 

hopla

Well-Known Member
I am back home and was able to get to to my Solo 1 stem and Nano WPA so I can now confidently say the straight solo stem is too shallow and large to fit directly onto the Nano. However with the old piece of whip tubing fudge it works OK. https://i.imgur.com/9hbFXIA.jpg Sorry about the crappy photo but I am a crappy photographer.
thank you!
that's a good news!
I think a thread about compatibility between device's accessories and other tweaks and tips could be useful: like the Mighty capsules that fit in the StickyBrick Junior etc. (maybe there's already one and I didn't see it?)
 

UnevenPizza

I dream of Pizza
Wow, lucky I checked in here today! Walnut stando on its way!
I'm weak. It has been done. :rockon:
"I have nothing in walnut", was my final justification check.
Had to add one of their stash containers to fill that stash hole. Can't have any unused holes laying around.

Weak? Fast, Lucky, CIVILIZED! Those are better ways to describe it :D!
Finally my desk will look so much nicer with an all walnut set-up!

But I didn't get an E-mail from Epic yet...maybe because it's a different item # or just a new listing and the old system doesn't carry that over or something. Oh well, I think I signed up for the waiting list 2 or 3 times haha.
GIDDY!

Oh @nadia_epic ,the description says it holds up to 5 different glass pieces, but from the picture it looks like it's 3 stems, 1 container and 1 e-pick.
That's pretty much all I need anyway, I just thought I'd point it out.

You can also search your house for items to be used with the new E-Nano. I never hardly pick mine up and never ever for the bong. Got a nice.... cap, that takes all the work out of it. LOL

2q0opwo.jpg
Wow, that is an amazing rig! I wish I could find a place where I can get food grad tubing, but not 200 feet of the stuff :lol:
 

SloJimFizz

Unknown Member
Wow, lucky I checked in here today! Walnut stando on its way!


Weak? Fast, Lucky, CIVILIZED! Those are better ways to describe it :D!
Finally my desk will look so much nicer with an all walnut set-up!

But I didn't get an E-mail from Epic yet..

Wow, that is an amazing rig! I wish I could find a place where I can get food grad tubing, but not 200 feet of the stuff :lol:

Thanks sir!
Saw the post on IG with the stands being cut. Figured a few people might like to know.

Got my auto email from Epic simultaneously with the PayPal email shortly after placing order.

The maker of the Tubo Evic sells short pieces of that whip tubing for pretty cheap. He also has some beautiful whips available made by his wife I believe. Cool AF Whips
They are in Switzerland, so they are on your side of the globe.
Their vape is mighty fine too. :cool:
 

dutz3013

Well-Known Member
Does it have the detachable plug? If so it needs to be upgraded and EpicVape will do it for you.
Theres new units without a detachable plug? Can you please clarify this a little more please. I bought a used unit not sure how old it is but seems pretty new by comparing the S/N numhber to the last one I owned
 
dutz3013,
  • Like
Reactions: BigJr48

CarolKing

Singer of songs and a vapor connoisseur
Enano is on its way. Any good tips?
I would order an 18 mm GonG or 14 if that’s the size of your glass. I use mine with an 18mm j hook some of the time. I do have water pieces I could use as well. Maybe you have already done that? I like the extended stem, a couple inches longer than the standard stem. Having a variety is a nice option.

This log vape is an investment in your health as well as your pocketbook. It’s not a weed hog. Plus they don’t cost very much money to buy brand new. You might like it so much that you may decide to buy a second unit. Good luck and happy vaping.:2c::peace:
 
Last edited:

UnevenPizza

I dream of Pizza
Enano is on its way. Any good tips?

When getting started don't pay too much attention to the number on the dial. My 5 may be your 4 or 6, so just be mindful of the taste, clouds/density, and AVB color.

And check your screen every few days for clogging. With the nano you can really draw more or less without restriction, so if it's slow or you find you have to pull harder than usual, just swab the screen in some ISO and it should come right clean.

And the best tip: enjoy!
 

hopla

Well-Known Member
Enano is on its way. Any good tips?
11tbyg8.jpg

Mine arrived one hour ago. (for italian members, customs only charged 16.50€...but italian customs are like a lottery, could have been 70€ as well)
I'd say never forget rule #1: never be out of material.
I could only test with maybe 0.02 and still succeeded in sipping 2 tasteful medium draws.
It seems really efficient, and i didn't expect it to be so tiny, the diameter is only about 5cm.
 
Last edited:

caliganja420

Well-Known Member
Hey guys What’s the recommended temp? I’m trying six and seven but I feel like I’m getting a lot of hits ABV is still very lighte should I go out to eat and I’m keeping about a quarter inch space between the material and the heater
 

CarolKing

Singer of songs and a vapor connoisseur
Hey guys What’s the recommended temp? I’m trying six and seven but I feel like I’m getting a lot of hits ABV is still very lighte should I go out to eat and I’m keeping about a quarter inch space between the material and the heater
I think your screen is too far away from the heater. Your ABV should be dark when finished. My screen isn’t 1/4 inch away - it’s closer than that. The temp sounds about right. It will vary depending on your outlet.
 
The temperature 'dial' is not real consistent from batch to batch so it's hard to advise on that. I keep mine dialed on 69 and I have the screen adjusted so my load is just off the heater by 2 or 3mm. That way the load never really touches the heater unit. I pack my load so it doesn't fall into the heater, also

This method gives a tiny bit of char to the closest end but vapes the rest of it to a nice dark brown.

Do you have a glass screen mouthpiece or the adjustable (brass screen) mouthpiece?
 

caliganja420

Well-Known Member
I think your screen is too far away from the heater. Your ABV should be dark when finished. My screen isn’t 1/4 inch away - it’s closer than that. The temp sounds about right. It will vary depending on your outlet.

The temperature 'dial' is not real consistent from batch to batch so it's hard to advise on that. I keep mine dialed on 69 and I have the screen adjusted so my load is just off the heater by 2 or 3mm. That way the load never really touches the heater unit. I pack my load so it doesn't fall into the heater, also

This method gives a tiny bit of char to the closest end but vapes the rest of it to a nice dark brown.

Do you have a glass screen mouthpiece or the adjustable (brass screen) mouthpiece?

I will try and get closer to the heater. It’s a little difficult to see when it’s on the heater. I have a adjustable brass screen
can I push the screen deeper and pack maybe .2? Or just keep the screen right where the silicone guard is and keep packing .1 ?
How many hits should I be expecting my last bowl got nearly 10 hits
 

CarolKing

Singer of songs and a vapor connoisseur
If you get a restricted draw you know you’ve used too much weed. A fully heated up unit does work best. Also keeping your stems clean and the screen free of debris. Don’t pack your weed you need airflow. Your temp could vary a bit depending on your personal preference and electrical outlet.
 

hopla

Well-Known Member
I had a serious learning curve with the e-nano: i found out that i never combust my material when i slide the stem from the heat source while i'm breathing in (like the technique of a straw going up and down a can when you're trying to get the last sips), i rarely let it sit on the heat chamber, but keep adjusting the distance like the stickbrick with the butane lighter going back and forth.
Once you get the screen distance right and know how to regulate the stem from the heat chamber, the e-nano is a monster when it comes to hit potency and taste.
 

BabyFacedFinster

Anything worth doing, is worth overdoing.
I had a serious learning curve with the e-nano: i found out that i never combust my material when i slide the stem from the heat source while i'm breathing in (like the technique of a straw going up and down a can when you're trying to get the last sips), i rarely let it sit on the heat chamber, but keep adjusting the distance like the stickbrick with the butane lighter going back and forth.
Once you get the screen distance right and know how to regulate the stem from the heat chamber, the e-nano is a monster when it comes to hit potency and taste.

molto bene!

Every nano is different. You have to find your nano's sweet spot. Sounds like you are experimenting and having fun at it.

You only need a little pinch of weed each time. I break up a little weed with my fingers, then use the stem or gong like a straw and suck up the weed into the bowl. No packing. Sometimes the heater is so close that the heater will push the weed down a bit. No problem, at a 6 for me I never have combustion. It works just fine. Don't worry about the heater being too close. It will work out fine as long as the nano is not cranked up to full power.

Yes, warm up the nano. I like to wait about 15-20 min after first plugging it in.

I would love to use my nano then go out for some real Italian food and red wine!
 

hopla

Well-Known Member
molto bene!

Every nano is different. You have to find your nano's sweet spot. Sounds like you are experimenting and having fun at it.

You only need a little pinch of weed each time. I break up a little weed with my fingers, then use the stem or gong like a straw and suck up the weed into the bowl. No packing. Sometimes the heater is so close that the heater will push the weed down a bit. No problem, at a 6 for me I never have combustion. It works just fine. Don't worry about the heater being too close. It will work out fine as long as the nano is not cranked up to full power.

Yes, warm up the nano. I like to wait about 15-20 min after first plugging it in.

I would love to use my nano then go out for some real Italian food and red wine!
yep! i am playing with it a lot, and i'm still astonished by the ludicrous little amount you need to have 2-3 good tasty hits. I had a beginning of combustion when i packed it too much, and i found out that it's preferable to pack it very lightly and repack it 3 times (instead of packing with the amount of 3 sessions and to stir it after 2 hits: it's more tasteful with the light pack method)
Can't wait to receive my bong, in 3-4 weeks, then i'll have some fun with all my devices.
I'm sure you can find a good italian restaurant near where you live, Italians are everywhere and they usually respect scrupulously their culinary traditions.
If not come and visit Italy, great country, beautiful people, best food you can find (and i stop there, i start talking like the Donald :razz: )
 

caliganja420

Well-Known Member
How can i obtain maximum cloud production with the nano? I feel like im getting nearly 7 hits on one bowl and the hits are medium-large
With my mighty its different, every hit is a huge hit
I have been keeping the herb closer to the heater
 
caliganja420,
  • Like
Reactions: BigJr48
Top Bottom