• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Discontinued Haze Square

Fushigi23

New Member
I really enjoy the taste and vapor quality. There are some problems though. I have difficulty hitting the vape sometimes and don't get any vapor, and one of the silicone o-rings keeps coming out and getting stuck and jams the mouth piece in it's holder. Has anyone else had any of these issues?
 
Fushigi23,

ginolicious

Well-Known Member
The lids stay much cleaner with a little screen on the top of the pod.

Personally do not prefer that method. I tried it. Personally I feel it changed the draw and the vapour quality.

I really enjoy the taste and vapor quality. There are some problems though. I have difficulty hitting the vape sometimes and don't get any vapor, and one of the silicone o-rings keeps coming out and getting stuck and jams the mouth piece in it's holder. Has anyone else had any of these issues?

When you are not getting vapor are you pulling hard and slow? Have you tried to give a bowl a little stir?

Regarding the o rings, some have reported such issue. Have you lubricated them? Coconut oil? Or use the wax that Dynavap sells on their side for $5 or $6
 
ginolicious,

MinnBobber

Well-Known Member
I think we should focus on no mouthpiece vaporizer concept next time :)

I am just joking. We will work on this to enhance the mpc experience.
......................................................................................................
Or suggest that folks lube the O-rings on the mouthpiece?
Mine was tight in the MP holder/ tended to roll off the O-rings.
A little wood butter on the O-rings and now it works nice and easy.
 
MinnBobber,

mfw0mb

Dr. Octagon
one of the silicone o-rings keeps coming out and getting stuck and jams the mouth piece in it's holder. Has anyone else had any of these issues?

Everytime I use the storage slot the bottom O-ring gets stuck in the slot and has to be fished out.

how much material are you all using on average to fill 4 carts?

Been using about 0.4-0.5 for a full set (~0.1 per pod)

@Haze Vaporizers couple of product suggestion:
1) MP folds up from the top side. Keep it ceramic, but add 2 prongs on the bottom of the MP that lets it act as the hinge. Be able to replace the MP with a "pull up then slide left" design, or even the turn slot style. Put a bit of silicone at the mating path point to make a solid seal. Maybe a ball socket style end of the MP so it's a smooth travel.

2) Silicone or metal screen caps. The current pod lids would work pretty good if it had a pattern of holes in it. I'm going to dig up an old tiny leather punch and try to modify one myself. A lot of people have started using various screens (myself included), and I'd personally rather use a custom cap instead of a generic pipe screen. Maybe even just a standard screen with a brimmed basket style lip to sit in the pod like the current lid. Like a flattened micro dose pod.

Any update on the spare loading tray arrivals?


oh and for anyone who cares........ hash I made works between 2 conc pads. Just gotta make sure you crumble it up. My press makes a near perfect puck for the pod. Too bad this would never work. Still prefer mixing it with flower.

:mmmm:
 

Djsleepy

Well-Known Member
I was expanding on my blowing the holes of ss screens out after swabbing with iso to prevent doing a deep clean and I know this is not a cheap way but it is very effective way to blow out the holes....las t night I ran across some electronics dust spray for keyboards,comps,etc. After a quick spray ....wow!!!! It was like I deep cleaned it. If you got some around the house try it!
 

mfw0mb

Dr. Octagon
....las t night I ran across some electronics dust spray for keyboards,comps,etc. After a quick spray ....wow!!!! It was like I deep cleaned it. If you got some around the house try it!

Hahaha just make sure you ISO it AFTER you dust it. There's a reason they ID people when buying that stuff where I'm from.

@FlyingLow - I weighed a full pod yesterday and it came to 0.35 grams

@mfw0mb - do you feel like your 0.1 grams is a light load? My 0.35 is a med-fine grind, pretty full with no tamp

My pack equals almost 1.5 grams to hit the road with!

Not really. Sometimes I can see it has moved around a bit. I'm using a GR8TR fine plate, and a light tamp. Maybe my material is just a bit more fluffy. I'll fill her up a bit more and see how it goes for me.
 

ginolicious

Well-Known Member
The more fluffier the material the less you need. But even at that I found putting a .1 in there to make very light vapor.
 
ginolicious,
  • Like
Reactions: Easywider

frank grimes

Well-Known Member
@FlyingLow - I weighed a full pod yesterday and it came to 0.35 grams

@mfw0mb - do you feel like your 0.1 grams is a light load? My 0.35 is a med-fine grind, pretty full with no tamp

My pack equals almost 1.5 grams to hit the road with!

Holy cow, that’s ridiculous! I was wanting to purchase a unit but that’s too big a bowl for me. How many draws do you get? Of course the effects must be good if you’re using that much herb at once.

Anyone actually weigh out 0.1-0.15g? How does it look in the bowl? And what about the effects with that microdose amount?

Has anyone tried the EQ or RBT basket for microdosing that @b0 was mentioning?
 
frank grimes,

ginolicious

Well-Known Member
I do not vape .1 in my pods. I fully pack and use the same pod for 3-4 days at about 5 draws a day.

I do not weigh my weed before packing every time. I’ve done so once or twice to understand how much the pods hold which is generally .25-.35.

I do not vape .1 in my pod. Will do once microdose comes out.
 

caseball2051

Well-Known Member
My bowls are large like stickstones commented. But don't have a scale to measure.

I find a full pack works best.

In vape critics review I thought he commented that 0.25 was about what he was packing.

Been playing with different inhalation techniques and had some success with taking a few smaller 3to4 sec sips rather than a large draw. I also had success with a small 3to4sec sip and then a large draw.

I also found that taking my unit apart and tapping it lightly gave a nice stir.

Last two tips should sound familiar to mflb users.
 
caseball2051,

Djsleepy

Well-Known Member
Hey guys getting some Krishna kush budder this weekend never done before .....any temp recommendations? Draw? Expectations?
 
Djsleepy,

Easywider

Simple is the way
My bowls are usually about .25 - .35

Can the haze do what the grasshopper does with .1g? I can cash in one grasshopper chamber in about 2 draws and I am good to go.

Yes and no, the Square certainly has the capabilities, but the bowl likes to be full to achieve that kind of performance. With a rimmed rbt basket you can crush a .1 in a few hits. On high temps I can finish a full bowl .25-.35 in about 5 hits, each one very close to a hopper hit. It's honestly hard to tell how big the clouds are because they are always so smooth, but 5 draws to finish a bowl that size is some speedy extraction!
 
Easywider,

stickstones

Vapor concierge
Holy cow, that’s ridiculous! I was wanting to purchase a unit but that’s too big a bowl for me. How many draws do you get? Of course the effects must be good if you’re using that much herb at once.

Anyone actually weigh out 0.1-0.15g? How does it look in the bowl? And what about the effects with that microdose amount?

Has anyone tried the EQ or RBT basket for microdosing that @b0 was mentioning?

This stuff I'm using now isn't very fluffy, so my pods are fuuuuuuull. I probably pack around 0.2 - 0.25 with my usual, fluffy chronic.
 
stickstones,

MinnBobber

Well-Known Member
Holy cow, that’s ridiculous! I was wanting to purchase a unit but that’s too big a bowl for me. How many draws do you get? Of course the effects must be good if you’re using that much herb at once.
..........................................................................
FYI, a micro-dose or mini-dose can be used with a screen resting on top of the load.
You don't need to fill the bowls, just contain it from blowing around.

And, there is a Haze micro-dose concept being developed. :)
 
MinnBobber,
  • Like
Reactions: Easywider

ginolicious

Well-Known Member
My bowls are usually about .25 - .35



Yes and no, the Square certainly has the capabilities, but the bowl likes to be full to achieve that kind of performance. With a rimmed rbt basket you can crush a .1 in a few hits. On high temps I can finish a full bowl .25-.35 in about 5 hits, each one very close to a hopper hit. It's honestly hard to tell how big the clouds are because they are always so smooth, but 5 draws to finish a bowl that size is some speedy extraction!

What temp are you using to crush a full pod in 5 draws?
 
ginolicious,

Ozzkurr562

New Member
How often after smoking bowls do you guys have to recharge battery? I get two bowls and battery is out. I’m going on vacation and I need it to last longer.
 
Ozzkurr562,
Top Bottom