not that I am aware of.
Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer
- Thread starter natural farmer
- Start date
not that I am aware of.
Yup. I was trying to get away with only one glass piece in the house but this has made me realise I'm not being as clever as I thought I was. I'm gonna get my D020 back from a friend and try that with the VRod and dabs.
The glass I have was great for the SH and flower but I dont think its suitable for just dabs.
EDIT: NV glass bowls in the house! A better fit than the stevenlmz for sure. The screen in the NV is much much better too. Stevens has an ever so slightly deeper bowl but the handle on his bowl is also higher up and therefore gets way hotter a lot quicker. The NV fit is much better, no need to hold the coil straight to stop an air leak like on stevens.
Very happy indeed.
Last edited:
Have you considered this piece?
http://www.cleanclearglass420.com/vape-rig_p0063.html
@biohacker uses this as his DD in rosin utopia/nirvana/wonderland...(pick one!)
@steama damn, suddenly Im really drawn to that TAG rig. They were emailing me for weeks trying to get me to buy it before it was discontinued. I just went with some serious consideration to see if I wanted to buy one but there are hardly any options left especially in 18mm female.
Oh well, not meant to be I guess.
Likes2vape
Well-Known Member
I personally love the branding on NV stuff.
Got an 18mm in today!
Can’t wait to grab one along with the stubby stand.
Snooppossum
Well-Known Member
hey guys, i was reading alot on this forum as im getting ready to buy the flowerpot, and i came across an interesting thread. somebody was saying that its hard to use a FP with a dewar style rig because the joint sits really low. they also said its hard to find dropdowns/adapters for this piece...is this true?
https://www.dhgate.com/store/product/ccg-new-2017-glass-water-pipes-glass-bongs/407153389.html
i really love the piece in the link above but im worried it may not fit with the FP.
https://www.dhgate.com/store/product/ccg-new-2017-glass-water-pipes-glass-bongs/407153389.html
i really love the piece in the link above but im worried it may not fit with the FP.
Chicken #420
I and I be Irie Vaping with U and U in Zion, mon!
I have that exact pipe, in that exact color.
No problem at all using the FP with it. It's a nice pipe.
Justpassedu
Well-Known Member
Hey all new bowl styles in , "short version" glass bowls with smaller internal volume, more closely matching NewVape bowl volume (11mm internal height) .
18mm Male, Short Version:
https://www.ebay.com/itm/253736410017
14mm Male, Short Version:
https://www.ebay.com/itm/253736402478
I have yet to try them but a friend of mine has said they work nicely .
18mm Male, Short Version:
https://www.ebay.com/itm/253736410017
14mm Male, Short Version:
https://www.ebay.com/itm/253736402478
I have yet to try them but a friend of mine has said they work nicely .
Snooppossum
Well-Known Member
I have that exact pipe, in that exact color.
No problem at all using the FP with it. It's a nice pipe.
awesome man im sooo stoked now thanks! do you use a dropdown with yours?
Chicken #420
I and I be Irie Vaping with U and U in Zion, mon!
No, I just use a bowl straight out the top. Sometimes a particle trap in between, if I'm going to camp out with the piece for a while.
Snooppossum
Well-Known Member
No, I just use a bowl straight out the top. Sometimes a particle trap in between, if I'm going to camp out with the piece for a while.
sweet, i just ordered mine. never heard of a particle trap, you just mean screens lol?
muunch
hotboxing the cockpit
I have the same pipe as well.
Love it and it's my DD for flowers, but I did need a super deep 18mm to 14mm reducer to fit it. I am not sure if yours will come the same, but after finding a 14mm bushing adapter that fits, I use my 14mm shovelhead and it works perfectly. I usually end up pulling the adapter out as well when I'm clearing the bowl.
Love it and it's my DD for flowers, but I did need a super deep 18mm to 14mm reducer to fit it. I am not sure if yours will come the same, but after finding a 14mm bushing adapter that fits, I use my 14mm shovelhead and it works perfectly. I usually end up pulling the adapter out as well when I'm clearing the bowl.
ZeroChances
Active Member
Any news on NV coming out with a SIC dish for the VROD?
My friend Im so sorry to see you are afflicted with a terrible condition- you want and expect the unreasonable! It is a very challenging condition to live with and has been known to bring about excruciating disappointment.
All due to people simply wanting too much to ask for. I heard of one such case where a guy bought the Flowerpot Showerhead one day, PRESUMING his divine right to actually USE it. Silly fool!
Seek immediate help before it is too late (but don't expect to get it!)
Snooppossum
Well-Known Member
very interesting, what might i need if i just wanna use it with an 18mm piece? id like to find some sort of dropdown to protect dat cheap china glass lol
TheFatBastard
Well-Known Member
Hey guys! I already asked this by PM to a nice forumite, but I also would like to hear your public oppinion, that way some others in my situation can obtain help from this post.
I have an Arizer V-Tower (extreme q with no fan/balloons) with the Ddave mod, and I'm seriously thinkng about getting the FP SH, after reading a lot, and though I'd only vape flowers, seems to be the best option for the money.
The thing is....I'm based in Europe, and I was just up to buy the enail in DHGate and the showerhead set and the bowl separately, which would cost around 275€ (and would probably have to deal with customs because of the enail from DHGate), I would even add a stand/debowler (85€ more), which would make the thing around 360€....... but I just saw that the Flowerpot Starter Kit is available in Vapefiend for 428€: https://vapefiend.co.uk/collections/newvape/products/flowerpot-twax-starter-kit?lshst=collection
It adds the carb cap, handle..... and it is really only around 70€ more.I already have glass, so....
Maybe the kit is a good option, since you get all together from Vapefiend, no customs issues from UK and don't have to buy the enail from China and deal with customs, which will save me a headache, but I'd like to hear your oppinion.428€ is, at the end, a lot of money for a vaporizer.
I really think the FP SH can be a really good improvement in my sessions over the Arizer V-Tower, for all I've readed, the FP hits way harder, which is what I'm really looking for, but I'd be very disappointed if I don't get noticeable better "results" than with the V-Tower.
So....do I buy the essential pieces from Vapefiend and get an enail from China, or is the kit from Vapefiend worth it? Is the money worth the improvement over a V-Tower in your oppinion?
Thanks in advance for your help!
I have an Arizer V-Tower (extreme q with no fan/balloons) with the Ddave mod, and I'm seriously thinkng about getting the FP SH, after reading a lot, and though I'd only vape flowers, seems to be the best option for the money.
The thing is....I'm based in Europe, and I was just up to buy the enail in DHGate and the showerhead set and the bowl separately, which would cost around 275€ (and would probably have to deal with customs because of the enail from DHGate), I would even add a stand/debowler (85€ more), which would make the thing around 360€....... but I just saw that the Flowerpot Starter Kit is available in Vapefiend for 428€: https://vapefiend.co.uk/collections/newvape/products/flowerpot-twax-starter-kit?lshst=collection
It adds the carb cap, handle..... and it is really only around 70€ more.I already have glass, so....
Maybe the kit is a good option, since you get all together from Vapefiend, no customs issues from UK and don't have to buy the enail from China and deal with customs, which will save me a headache, but I'd like to hear your oppinion.428€ is, at the end, a lot of money for a vaporizer.
I really think the FP SH can be a really good improvement in my sessions over the Arizer V-Tower, for all I've readed, the FP hits way harder, which is what I'm really looking for, but I'd be very disappointed if I don't get noticeable better "results" than with the V-Tower.
So....do I buy the essential pieces from Vapefiend and get an enail from China, or is the kit from Vapefiend worth it? Is the money worth the improvement over a V-Tower in your oppinion?
Thanks in advance for your help!
wildman420
The Most Interesting Monkey in the World
Awaiting my
Just depends on your $$ situation. Getting the kit, you know everything is going to show up at the same time and its all going to fit perfectly. I dont know what the prices for flower are in the UK but in the states the cost of this setup is about the same as a couple of ounces. I can tell you that this will be the last vaporizer you will ever need. Nothing in my collection comes close to this thing. I actually just bought a second unit with the a battery pack so I can be mobile.
Just depends on your $$ situation. Getting the kit, you know everything is going to show up at the same time and its all going to fit perfectly. I dont know what the prices for flower are in the UK but in the states the cost of this setup is about the same as a couple of ounces. I can tell you that this will be the last vaporizer you will ever need. Nothing in my collection comes close to this thing. I actually just bought a second unit with the a battery pack so I can be mobile.
muunch
hotboxing the cockpit
Possibly not.
I only have a 14mm post for my shovelhead bowl. If you have an 18mm post, you may be able to keep the post low enough to make a seal without needing anything else.
edit: in US, cost of a vrod/SH setup is around 1.5-2oz of ganja (in my area, etcetc)
easily worth it. it's coming up on a year I've had my flowerpot now and it has drastically changed my views of vaping and how i vape my flower
edit2: i don't use dropdowns and idk which would fit this pipe, sorry
Last edited:
Snooppossum
Well-Known Member
hey guys are there any 20mm coils that are known to work with the vrod other than newvapes?
timeisforchange
Member
So I totally want to take advantage of the 710 sale on NV's site today, SH or Vrod? I do dab, BUT I have the 710life 20mm coil. I think the coil spins in the wrong direction to fit the internal machining of the new Vrod design, so I think it may be best paired with the SH. On the other hand I've thought it might not make a difference, the coil may still fit inside the Vrod... any thoughts?