Gear Slug .33 Rosin Forge

Nattybushdoctor

Well-Known Member
Manufacturer
make sure you are compressing all the way, until you bottom out. When you see the forge back off a little towards the end, continue slowly, and finish tight. This is when the magic happens a lot of the times.
 

okydokes

Well-Known Member
I got my vice...I modified my vice...I’m about to clean my deuce, then later on do my first squish...then hopefully my first ever concentrate after twenty odd years of using cannabis...I’m scared y’all!
 
okydokes,
  • Like
Reactions: steama

okydokes

Well-Known Member
Oh yeah, I haven’t got scales and don’t want to get any s I’m going for press will only go a quarter in like natty’s vid suggest???
 
okydokes,
  • Like
Reactions: steama

okydokes

Well-Known Member
First go, not great results. Maybe a small dabs worth. Dark rosin bubbled...that means heat was ok? Flower is mid grade so I won’t get great result bu hope to get better than this. Any advice apreciated
 
okydokes,
  • Like
Reactions: steama

Nattybushdoctor

Well-Known Member
Manufacturer
How can it get any easier than ALL the videos that are available? We don't get many requests for additional help beyond that but we are always open to new ideas and ways to improve. Maybe a short list of things to cover before you start. ??? any ideas would be great! PEACE!!!
 
Nattybushdoctor,
  • Like
Reactions: mephisto

mephisto

Well-Known Member
Great results here too, using the info provided by NBD. It ain't that difficult people.
Be the ball, Danny.....
 
mephisto,
  • Like
Reactions: steama

okydokes

Well-Known Member
I expected a learning period. In general rosin seem a bit of an art rather than science right now.
I heated for 1.45. I saw the rosin bubbling . Give it another 15 when I saw the yield wasn’t good. My pick feels dry but still smells good, finger slightly oily having broken it up. I watched the vids from natty bout thirty times even before ordering, have watched about the same since getting it. Also watched the Brazilian woman who got decent results.
 
okydokes,
  • Like
Reactions: -dab8-

okydokes

Well-Known Member
I’m using a kitchen torch. I have a honest lighter too but I went with the kitchen on so I can use cheaper fuel down the line.
 
okydokes,
  • Like
Reactions: steama

-dab8-

Dyna-saur
I expected a learning period. In general rosin seem a bit of an art rather than science right now.
I heated for 1.45. I saw the rosin bubbling . Give it another 15 when I saw the yield wasn’t good. My pick feels dry but still smells good, finger slightly oily having broken it up. I watched the vids from natty bout thirty times even before ordering, have watched about the same since getting it. Also watched the Brazilian woman who got decent results.
Brazilian woman??? There are slugs videos I don’t know about??? Who is it???
 
-dab8-,
  • Like
Reactions: okydokes

okydokes

Well-Known Member
What are you heating for 1:45, the slug33 or the deuce? I am just curious because we are quite a bit different...respect my friend. Which could be perfectly fine, I don't know?

I have been getting great results when I heat my 1 gram slug33 1:15 the flame size is hard to explain depending on your torch. I would say that most kitchen/Blazer torches the flame adjust should be at least half intensity. When I heat, I put the blue tip of the flame on the back of the slug. After heating for 1:15, slowly crank down and squeeze out the gold at the end. For the deuce I heat the same way, the same flame intensity as the small slug, only heating for exactly 2:00 everytime for the deuce. I have huge mindblowing yields with the deuce. I truly is amazing.

Since I had a new toy I played with it until I could get predictable results everytime. This helps because when something is off I am quick at figuring my problem out and things are is easy to identify and fix.

Still a lot to learn, however, I will not need a drop more of rosin for at least 2 weeks. Yeah buddy!

Mate! I’m hoping to be with you soon. I got the flame looking like nattys. I got the deuce. Next press I’ll go with your timings. I’m using mids right now while I practice, so my yields won’t be great.
Squeeze wise I might have Been too hard and premature (fnar,fnar). I’m gonna try enjoy the process of learning. I don’t usually notice design but I really like this thing.
 

okydokes

Well-Known Member
Oops


Mate! I’m hoping to be with you soon. I got the flame looking like nattys. I got the deuce. Next press I’ll go with your timings. I’m using mids right now while I practice, so my yields won’t be great.
Squeeze wise I might have Been too hard and premature (fnar,fnar). I’m gonna try enjoy the process of learning. I don’t usually notice design but I really like this thing.
 
okydokes,
  • Like
Reactions: steama

okydokes

Well-Known Member
Brazilian woman??? There are slugs videos I don’t know about??? Who is it???

I searched and the only non natty vid was on YouTube of a woman I think was Brazilian using it with good results. It was confirmation for me. Don’t know if we can post links.

Ta rah
 
okydokes,
  • Like
Reactions: steama

ClearBlueLou

unbearably light in the being....
I remember seeing about this but not finding it - how wide do the jaws need to be for a Fat Mac? I’m looking at this very one:
Just popped into this thread the other day after reading @steama mention it. I had always assumed any decent sort of rosin press would be $500 and up.

But it looks like I could get going for right around $125 since I already own a torch. There is a WEN tilting vise on Home Depot and Amazon for $54 that looks like it would be perfect.

Just get the Slug33 and this tilting vise:

https://www.amazon.com/WEN-434TV-4-...bp_QL65&keywords=wen+drill+press+vise+tilting

wen-vises-434tv-64_1000.jpg



Love the idea of pressing my own rosin. And the 1 g size would be perfect for myself and maybe one other.

Watched quite a few videos and I love the simplicity of it. Looks like consistent results won't be that difficult once you get things dialed in. Great product, @Nattybushdoctor , have a feeling one is in my future.
 
Last edited:
ClearBlueLou,

Roth

Pining for the Mountains
What are people doing for a cleaning procedure between pressings?

Just wiping with a paper towel while still warm? Or wiping down with ISO?

I've been using ISO, but didn't know if I could get away with just a simple paper towel wipe. Didn't want to introduce anymore variables while I'm still perfecting my technique.

I'm definitely seeing improvement, got 15% returns on the last press I did. Pretty sure I used too much heat though, the rosin was very dark and I could smell a decent amount of terpenes being cooked off as I pressed.

I'm going to try loading more around 0.95g and see how that works out for me. That way I can reduce the heat and still hopefully not get any blowout. I feel like I might be using just a hair too much material.
 

ClearBlueLou

unbearably light in the being....
Just on principle I’d say no on the paper towel...not even pine tar is as sticky and transferable as this stuff...maybe spraying it w/ iso first, then paper towel?

But I am only an egg....


Since I’m here, I’ve seen several who say they smoke/vape the puck, I’m curious: do you smoke it out of a sense of completeness, or is it worth having in the rotation? I’m a waste-not kinda guy, but if it comes out bunk, that’s worth knowing
 
Last edited:
ClearBlueLou,

-dab8-

Dyna-saur
I just run a paper towel through while the whole thing is so hot you can barely hold it. Will come right off.

I haven’t smoked a puck yet. Was waiting on my dynavap, and since I got it have been enjoying it with fresh flower. I’ll grind one up and give it a shot. Have several from early on that are for sure full of good stuff still.
 

scion34

Well-Known Member
Since I’m here, I’ve seen several who say they smoke/vape the puck, I’m curious: do you smoke it out of a sense of completeness, or is it worth having in the rotation? I’m a waste-not kinda guy, but if it comes out bunk, that’s worth knowing

Ive been saving the pucks to vape, there’s a bit of actives left over. After grinding them up it resembles Mexican Swhag (brick weed) in texture and potency, IMO. Good for a couple (2) okayish hits in the FlowerPot, lacks most of the original flavor. I think it’s up to the individual to decide to save it or not, unlike most I throw my AVB out into the compost. I’d think pucks would make better edibles than AVB as well, however I’ve yet to try it.
 

ClearBlueLou

unbearably light in the being....
Everything you need, the slug33, the deuce, 4.25" tilting vise, torch, butane, parchment. Everything fits very nicely into one of these bags. A bit less than about 10 square feet of space for a 20 ton rig. How nice is that?

Bostitch BTST516155 16" Open Mouth Tool Bag
That sweet bag of your turns out hard to find...like it!

I just run a paper towel through while the whole thing is so hot you can barely hold it. Will come right off.

I haven’t smoked a puck yet. Was waiting on my dynavap, and since I got it have been enjoying it with fresh flower. I’ll grind one up and give it a shot. Have several from early on that are for sure full of good stuff still.
I’m impressed that the paper works. Well done!
I love my VCs, too, want to feed them goo....

Ive been saving the pucks to vape, there’s a bit of actives left over. After grinding them up it resembles Mexican Swhag (brick weed) in texture and potency, IMO. Good for a couple (2) okayish hits in the FlowerPot, lacks most of the original flavor. I think it’s up to the individual to decide to save it or not, unlike most I throw my AVB out into the compost. I’d think pucks would make better edibles than AVB as well, however I’ve yet to try it.
Yeah, I remember...sprayed with co’cola and pressed tight. That was some stank shit and not in a good way!

I like your edibles idea! I’m also contemplating a Nova decarber, and I think the pucks just might be perfect for it....

BTW, that WEN vise is 4.25”, not 4.5”... does that matter?

Thanks, y’all, I’ve got a new fun set of toys to play around with in my head now!
Gonna go watch some vids...:wave:
 
Last edited:
ClearBlueLou,
  • Like
Reactions: -dab8-
Top Bottom