Dynavap VapCap
- Thread starter Fenton Mewley
- Start date
Ricardo
Well-Known Member
@Hackerman . .... You clearly love it.
@LesPlenty... . Ripper!
@Dynavaper. . Was it you it didn't work for?
@LesPlenty... . Ripper!
@Dynavaper. . Was it you it didn't work for?
Yep, but shop around, mine was euro38 delivered to Oz, get one.
https://www.ebay.com.au/itm/Dental-Lab-SJK-Wax-Heater-Infrared-Electronic-Sensor-Carving-Equipment-130W-NEW/222815109775?ssPageName=STRK:MEBIDX:IT&_trksid=p2060353.m2749.l2649
Not really, get one of these for home and a Portside Mini for a portable and you will be set.
Last edited:
Skunkport
Well-Known Member
Prince Albert hack. Sorry
i just had a horrifying thought. If any of you do have a Prince Albert, please make sure your induction heater is not at crotch level.
Imo:-
Dynavaper had a proper dental version, it was probably calibrated not to heat up random things but to get a precise heat on a wax knife's steel.
The chinese copies just slapped it together with rough tolerances that lets you use it for things that aren't intended.
Hackerman
User
What is a Prince Albert Hack?
I find this works best with my DDave water wand. I can puff it like a cigarette or insert it into the bong.
I found that inserting it all the way into the cup so that it is almost touching the back, gets the best results. However, with my M, that is a little too far in and the stem heats up after a while. The glass wand never gets hot and I can chain smoke this puppy non-stop. It's just like a lighter. If you stick it in slightly it's like torching the end of the cap. If you stick it in too far, it's like heating the other end of the cap. So, you can control it just like with a torch.
I don't even use the click any more. I can tell when it's just perfect because it is so amazingly consistent from time to time.
Here's another vid with the DDave wand and a bong. You'll notice I use the click on the first heatup but I don't wait for the cooldown click before I re-heat. This thing is amazing. It's hilarious that for 2 years you all thought they didn't work because of one person's test. Shame shame.
I find this works best with my DDave water wand. I can puff it like a cigarette or insert it into the bong.
I found that inserting it all the way into the cup so that it is almost touching the back, gets the best results. However, with my M, that is a little too far in and the stem heats up after a while. The glass wand never gets hot and I can chain smoke this puppy non-stop. It's just like a lighter. If you stick it in slightly it's like torching the end of the cap. If you stick it in too far, it's like heating the other end of the cap. So, you can control it just like with a torch.
I don't even use the click any more. I can tell when it's just perfect because it is so amazingly consistent from time to time.
Here's another vid with the DDave wand and a bong. You'll notice I use the click on the first heatup but I don't wait for the cooldown click before I re-heat. This thing is amazing. It's hilarious that for 2 years you all thought they didn't work because of one person's test. Shame shame.
KidFated.
Unknown Member
KidFated.
Unknown Member
I expected you to have this type of piercing already. Can't wait to for my Dyna-weekend
KidFated.
Unknown Member
It's a rough day to be a sparky, luckily my Blackwood woody is waiting for me.
caliganja420
Well-Known Member
How does my abv look?
I keep getting really dark abv and it seems %99.9 extracted, but almost to dark, as if i combusted
Any heating tips would be appreciated
I spin it and heat the middle of the cap, with the tip of my single torch
Last edited:
@Rollingstoned maybe use a finer grind
do you heat past the click?
if you do, maybe heat closer to the bottom of the cap instead, using the tip of the inside of the flame, the bright blue part. i find that can help heat the chamber more evenly if the top is getting burned
try to keep the tip from getting clogged
it still looks ok
do you heat past the click?
if you do, maybe heat closer to the bottom of the cap instead, using the tip of the inside of the flame, the bright blue part. i find that can help heat the chamber more evenly if the top is getting burned
try to keep the tip from getting clogged
it still looks ok
cybrguy
Putin is a War Criminal
Yeah, you are borderline on the bottom one. I would call it singed but not quite combusted. Combusted is black.
It probably doesn't taste very good at that level, but if you are after everything it looks like you are getting it. I doubt any THC or even CBD is left in that.
If you use tinypic.com instead of imgur everyone will be able to see your pic.
added: @Rollingstoned Thank you very much for changing your hoster.
It probably doesn't taste very good at that level, but if you are after everything it looks like you are getting it. I doubt any THC or even CBD is left in that.
If you use tinypic.com instead of imgur everyone will be able to see your pic.
added: @Rollingstoned Thank you very much for changing your hoster.
Last edited:
The Ti tip is everything I wished it would be. Such high airflow, so smooth to pull, big clouds. $32 very worth.
Ended up combusting again because of heating past the click with it. So much that I got white ash
I think I might've got an older Ti tip from PU, just the fin closest to the cap has a groove, and the fins are pretty thick and flat. but w/e it's good. maybe i'm wrong and it is the newest gen of Ti tip
Ended up combusting again because of heating past the click with it. So much that I got white ash
I think I might've got an older Ti tip from PU, just the fin closest to the cap has a groove, and the fins are pretty thick and flat. but w/e it's good. maybe i'm wrong and it is the newest gen of Ti tip
Last edited:
Gigsabits53
Well-Known Member
I have noticed with my Omni that it seems to work fine without going past the click. I do NOT want to combust ever in my Omni. I am definitely respecting the click, but still get very good clouds. Had mine for a few weeks now and have not combusted yet.
caliganja420
Well-Known Member
I received my Omnivap yesterday, and i already combusted once and burnt my fucking lips hitting it backwards...
Also noticed that i need at least 2 bowls to even get high
Will keep practicing
cybrguy
Putin is a War Criminal
Or is that infamous????
I'm thinking maybe you are starting too hot and burning some of the actives that would be getting you high if you went a little slower. I can get a decent buzz (little, not huge) off one load, and I have the CCD in position 2. We are all different, of course.
And thanks for sharing the backwards thing. I giggled, but not at you...
Last edited:
JamesTiberiousKirk
Well-Known Member
If you suck on the wrong end of your vapcap, it may be indicative of being higher than you thought you were.
But my sympathies, that has got to hurt!
But my sympathies, that has got to hurt!
@Hackerman F*@K THE CLICK
If I do a bowl thru glass it's done in two hits and coffee dark.
Dry hits and a longer stem are a different thing.
Rosin in hemp fibre for this one.
If I do a bowl thru glass it's done in two hits and coffee dark.
Dry hits and a longer stem are a different thing.
Rosin in hemp fibre for this one.
-dab8-
Dyna-saur
So, my second order from dynavap had a “m” starter kit for a friend that included a dynastash ER. He asked for walnut, so I left an order note and an email but was sent cedar.
Does anyone have the cedar dynastash? We were both worried the strong smell of cedar might make any herb stored in it smell kind of funny.
Does anyone have the cedar dynastash? We were both worried the strong smell of cedar might make any herb stored in it smell kind of funny.
Last edited: