Discontinued Supreme Vaporizer

Morty

Well-Known Member
Thanks. It ended up going out (off) a couple minutes after that, so I'm hoping it just needs a battery replacement.
 

Phenix

Well-Known Member
Battery may be the problem as well.
If you are opening the case tighten the screws if needed.

I would still advise every supreme user to order a replacement - use it in re kitchen til you need it for the sup
 

Alexis

Well-Known Member
Denver/Boulder meetup 2019 ? :haw: :rockon:
Dude I would absoutely LOVE for such a thing to be possible. For real, it would take somw serious miracles, I couldnt even consider gping away from home for even one night. Tied to home for allergy management sake.
A miracle of healing is always possible. Im working on it. Apart from that, I would also need a financial windfall miracle even if it was possible for me to travel so far.

It is hard seeing people always goung places, doing things, having fun on life, when all I can do is struggle thrpugh each day stuck at home, no adventure, fun or life.
I dream of going on holiday, allergy free. Just wake up, feel normal, live life.

Who knows what the future holds. An FC meet up one day would be so awsome for sure. Let's see what the future may hold.:tup:
 

Morty

Well-Known Member
My thermometer won't turn off or switch from Celsius to Fahrenheit. Anyone else ever have this problem ?

The temp reading is still working (going up and down), but it seems the 2 thermo control buttons aren't working. :hmm:
It just came "back to life". :shrug: I didn't do anything to it. Just tried it again right now. The On/Off & C°/F° buttons appear to be functioning just fine. :lol: :hmm: Wires perhaps being a little wonky ? Who knows ?


@Alexis Reading you loud & clear good buddy. 2021 in the 'dam it is then. :rockon:
 

Alexis

Well-Known Member
It just came "back to life". :shrug: I didn't do anything to it. Just tried it again right now. The On/Off & C°/F° buttons appear to be functioning just fine. :lol: :hmm: Wires perhaps being a little wonky ? Who knows ?


@Alexis Reading you loud & clear good buddy. 2021 in the 'dam it is then. :rockon:
Yeaah bro, that sounds a lot more like it. Im getting there but I can see I need a bit more time. That gives me a nice focus. I went twice to Amsterdam but didnt enjoy it much both times due to wrong company. I DREAM of going back in wellness. Last trip was 3 days in 2005, JUST as the Lyme Disease was setting in. And neither travel nor normal life has been possible since. Oh yes, I went with a schizophrenic friend too just as he bloomed into a full episide. :doh:

So its already a dream of mine, a vision of being free one day to just go somewhere, relax, have fun, get BLAZED! Know anywhere?:brow:
2021 target Amsterdam? Now that, is DOABLE!:cool:

In the meantime, please keep taunting me with tales of rudiculous ganja (which I cant expect to sample (indefinitely as it stands now lol)), and which Im bound to be allergic to anyway, hit in the most hardcore manner, in a VAPORIZER that Im also allergic to!:rofl:

Just kidding around, rub it in, it's all good. Im just happy to see other folks having fun. And it ain't all bad here. Our Autos are very good really. Think Different earlier today.
The Elev8r isn't bad either. Herbo Ti coming.
Then operation Meet Morty, 2021! :rockon:
 

Morty

Well-Known Member
heating to 400°F then inserting stem
This has become my new favorite way use the SV3 (vs heating inserted to around 360°F). Specifically w/ a Vapo2 stem w/ a nug plug & a fineish grind lightly tamped on top. 1st hit is all flavor w/ a pretty big cloud. 2nd hit the flavor starts to diminish, but the cloud & effects are mega. 3rd hit is to cash it.

The temp is around 340°F at this point. I then like to re-heat to 400°F & use the convection mod for a few additional tasty phat rips. (The Supreme also seems less finicky about draw speed than some other convection vapes)

This is how I see myself pretty much using my Sup from now on. Two different signatures, back 2 back. Both w/ good flavor, vapor production & effects. The little dabber tool that came w/ my DT V3 is perfect for tamping w/ the stems & stirring for the convection mod.
 

vapirtoo

Well-Known Member
I’ve been hanging the bowl assembly out of the block while heating it to 180c and then pushing the bowl all the way in. The temps drop a little but the pure convection hit is flavorful and the effects on the second hit make me take a knee as I might pass out and fuck up my head! Most of my vapes can do this, but the Supreme does it with ease. I took a hit a while back and panicked as I came back to consciousness because I had no idea what the fuck had just happened .
 

highasakite

Well-Known Member
Has anyone used RSO in the Supreme? I made a dab sammie and I still feel lifted 3 hours later, this shit is crazy. It’s 1:1 THC to CBD, maybe that’s why.
 

vapirtoo

Well-Known Member
Took the Sup out of the basement and into the garage with the huge door open so I could check out some nature. Two hits , some beer and baby squirrels coming out of everywhere! STONED!
Well two baby squirrels I freaked out a bit!
 

HindelangGG

Well-Known Member
Hey does somebody out there maybe know where i can get the Therma or Thermo (cant read it proberbly on mine) Thermostat? I once saw a post in this thread where this guy said you could find them on dhgate but maybe i am just to stupid for the right search therm for it. I would really appreaciat a link.

Btw The problem is that sometimes when i heat up the dial jumps around +- 50°C and sometimes just show HHHH rather then any number.
 
HindelangGG,
  • Like
Reactions: JCat

KidFated.

Unknown Member
Hey does somebody out there maybe know where i can get the Therma or Thermo (cant read it proberbly on mine) Thermostat? I once saw a post in this thread where this guy said you could find them on dhgate but maybe i am just to stupid for the right search therm for it. I would really appreaciat a link.

Btw The problem is that sometimes when i heat up the dial jumps around +- 50°C and sometimes just show HHHH rather then any number.
7th post on this page. Change batteries might solve it
 

highasakite

Well-Known Member
Hey does somebody out there maybe know where i can get the Therma or Thermo (cant read it proberbly on mine) Thermostat? I once saw a post in this thread where this guy said you could find them on dhgate but maybe i am just to stupid for the right search therm for it. I would really appreaciat a link.

Btw The problem is that sometimes when i heat up the dial jumps around +- 50°C and sometimes just show HHHH rather then any number.
The Thermo

Battery change

And you can get 10 batteries for $2 on eBay - https://www.ebay.com/itm/10-Pcs-LR4...270481?hash=item1ca2e91c91:g:2fcAAOSw-dxaliOE
 
Last edited:

JCat

Well-Known Member
Accessory Maker
Stays snug :tup:
Hmm ... I was looking at those! I've been custom cutting SS screens (this is time consuming!)

What's everyone's solution for connecting to their water piece? How are you using the grommets/washers? Have you found any other better solutions?

I've got some custom bowls I've made, but am looking for the best solution in regards to this ... I could order the parts I need for ~$40 (which will be enough for 20 bowls), but I really don't need that many right now :) ... but ordering less won't save me much (shipping) ...

Here's a couple pictures of the custom stems (currently setup with doubled up silicone tubing to create a functional SonG connection )

IMG_1066.jpg


IMG_1063_Copy.jpg
 

Morty

Well-Known Member
What's everyone's solution for connecting to their water piece?
I always did what @biohacker would do with the stock stem. No grommets/seals. Insert the stem just enough to have a tiny bit of the stem hanging out & it already seats pretty snug natively into a 14mm joint. Done. After your finished, just use your t shirt to pull out the hawt stem.
 

JCat

Well-Known Member
Accessory Maker
I always did what @biohacker would do with the stock stem. No grommets/seals. Insert the stem just enough to have a tiny bit of the stem hanging out & it already seats pretty snug natively into a 14mm joint. Done. After your finished, just use your t shirt to pull out the hawt stem.
Thanks ... trying to decide if I should order grommets or not :) ... $40 to order enough for 20 stems after shipping ...
 
JCat,
  • Like
Reactions: Morty

highasakite

Well-Known Member
I am looking for a way to store my Supreme 3 while the block is still hot. Because it falls over, it’s hard to keep it on it’s side, and all of the smaller boxes I have aren’t quite tall enough to be closed with the vape standing up. I am mostly looking to limit smell, but ability to travel would be awesome.
 

VAPEHUNTER

Well-Known Member
I am looking for a way to store my Supreme 3 while the block is still hot. Because it falls over, it’s hard to keep it on it’s side, and all of the smaller boxes I have aren’t quite tall enough to be closed with the vape standing up. I am mostly looking to limit smell, but ability to travel would be awesome.

You can make a simple "cover" out of cardboard and electrical tape. I've put it on while the SV3 was still hot and never had a problem.
MEWII4Wm.jpg
I7ifIlym.jpg


Or take it step further and make a whole case for it.

ZgRYaCa.jpg
 

highasakite

Well-Known Member
You can make a simple "cover" out of cardboard and electrical tape. I've put it on while the SV3 was still hot and never had a problem.
MEWII4Wm.jpg
I7ifIlym.jpg


Or take it step further and make a whole case for it.

ZgRYaCa.jpg
Nice! So your cover is just cardboard wrapped in electrical tape? I can do that lol...I was fearful of laying the SV3 down in a shoebox, where the block was touching the cardboard (I don't know, it was a hot piece of metal touching paper...?). I guess my fears were unfounded!
 
highasakite,
  • Like
Reactions: KidFated.
Top Bottom