Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer

Zangano Cruel

IG zan.cru (code) zancru (5% NV checkout discount)
I was really high when I liked @steama post jajajaja then I reread the thread jajajaja

max VROD enjoyment = two glass pieces, one for flower and one for herb

Makes things easy, quick, and clean.

:nod:

"One for flower & one for herb" I love it :tup:
And while we all appreciate the suggestions for Vrod improvements, I'll be blaming you @steama when I'm upgrading my new Vrod :p

Totally agree!!! And 2 bowls, one for each!!!
Stay vaped...

For herb & flower jajajaja
That’s what good greens and a powerful vape from NV do to people...
Stay vaped...

Even more reason to go SiC my friend, you could be dabbing in the 400's.... my girl doesn't stray from 450, but I usually don't drop below 550 unless it's something super tasty like a dank hash rosin. I was just going based on what i've seen posted here, just as a starting point for Steama. Jcat is also a new kid on the block and we've been conversing about temps, and I think he settled on 625 as a starting point. It's super cool seeing so many vaporists starting to use rosin, and on wicked dab surfaces like SiC!

400s...??? I really need to keep trying... I went all the way down to 450s but it was pooling too much in the SiC dish, even capping.
I’m using homemade rosin, pressed from cold extracted BlackBerry Kush...
Stay vaped...
 
Last edited by a moderator:

biohacker

Well-Known Member
400s...??? I really need to keep trying... I went all the way down to 450s but it was pooling too much in the SiC dish, even capping.
I’m using homemade rosin, pressed from cold extracted BlackBerry Kush...
Stay vaped...

If you're getting too much pooling, your dab is too big for the temperature. Surely you will have multiple hits at this time, but the point is that vapour is still very well produced, and has some incredible taste - and effects (for my girl, I personally need the upper temps to FEEL it). Pooling has always been a function of dab size vs temperature for me, and a non-issue with SiC.
 

wall

Well-Known Member
If you're getting too much pooling, your dab is too big for the temperature. Surely you will have multiple hits at this time, but the point is that vapour is still very well produced, and has some incredible taste - and effects (for my girl, I personally need the upper temps to FEEL it). Pooling has always been a function of dab size vs temperature for me, and a non-issue with SiC.
Agreed with higher temps, I turned it down the other day and hardly felt anything
 

Likes2vape

Well-Known Member
Kinda sounds like SH is still KING :D.
For flower only yes it is!! The Vrod kicks ass as well and blows most other vapes out of the water.

Agreed, the shower head will remain the king of flower. It's a beautiful work of vaporizer art.

:nod:
I agree too. The vrod is king dual use vape.

And is the VRod now the new NV king of trates?
Yes it is!! It is awesome for trates and twaxing!
 

invertedisdead

PHASE3
Manufacturer
I'm loving the VROD for flower, still too early to have much of an opinion but I feel like maybe the vapor is a bit smoother than the SH, possibly from these low temps? 615 capped is getting some thick vapor with pretty damn even extraction. I'm not spinning the cap. Also the new cap makes a beautiful bell-like harmonic ring when I take it off lol, super zen :peace:
 

Zangano Cruel

IG zan.cru (code) zancru (5% NV checkout discount)
VROD is so classy and kitchenware jajajaja

hWfzM1J.jpg


Stay vaped...
 

GoombaTroop

Well-Known Member
Budget Flowerpot Showerhead Build

---------------
enail: $87.58 (free shipping)
Banger E Quartz Nail Electric Dab Nail Box Kit Quartz Nail Carb Cap 14 18 MM Male Temperature Controller Rig glass Bongs

https://www.dhgate.com/store/product/banger-e-quartz-nail-electric-dab-nail-box/408149702.html

---------------

FlowerPot ShovelHead - Male Bowl (3097-KIT) = $50
https://www.newvape.com/flowerpot-shovelhead-male

or

glass bowl: $11.25 + $4.15 shipping = $15
https://www.dhgate.com/store/product/11cm-height-blue-honeycomb-percolator-glass/202166626.html

[The bowl (14mm vs 18mm) just depends on what glass you are using. The glass bowl from DHgate only comes in 18mm. The bowl from NewVape comes in both 14mm and 18mm. But you can always get a converter.]

---------------

Showerhead 20mm Head Set (9213) = $100
https://www.newvape.com/showerhead-combo-20mm-2

or

ShowerHead for 20mm Coil (3063) = $60
https://www.newvape.com/showerhead-flowerpot-20mm

+

20mm Coil Nut (3066) = $20
https://www.newvape.com/20mm-coil-nut

[The Showerhead set for $100 comes with the Showerhead, the Coil Nut, and Coil Cover. The Coil Cover is recommended, but not necessary. You can save $20 by just buying the Showerhead and Coil Nut separately instead. The Coil Cover is not required for the Flowerpot use. It helps keep the heat inside, reduces heat up time, and allows lower temps on the controller. Carefull it's not a heat shield as it will still get hot.]

---------------

FlowerPot Stand & Debowler (3004) = $50
https://www.newvape.com/flowerpot-stand-debowler

or

Make Your Own = $0
Example of a DIY version:
http://fuckcombustion.com/threads/newvape-flowerpot-twax-vaporizer.23162/page-435#post-1264763

---------------

You need a glass bong. They come in either 14mm or 18mm. Make sure your glass matches your bowl size.

If you get a 14mm bong, you need a 14mm male bowl. If you get an 18mm bong, you need an 18mm male bowl.

Here are some recommended bongs:

https://www.reddit.com/r/chinaglass/wiki/recommended_rigs

This one looks good:

FC-186
https://www.dhgate.com/store/product/advance-booking-2015-new-high-quality-glass/218127444.html

$47.22 + $4.14 shipping = $51.36

---------------

OPTIONAL

Titanium ShowerCap Carb Cap (3096) = $40
https://www.newvape.com/showerhead-carb-cap-1

[Not really necessary if you're only using flower]

---------------

Cheapest option (not including glass): $88 + $15 + 80 = $183 (plus shipping costs from NewVape)

* All prices in USD
** Shipping costs from DHgate were to Toronto, Canada. Shipping costs vary.


====================

Alternative E-nail:

e-nail: $100 + $13 shipping = $113
Menovo Electric E Dab Nail Rig Bongs Wax Vaporizer With Coil Heater Device Dabber Box For Dry Herbal Vape Kit
https://www.dhgate.com/product/new-...rizer/394135808.html#s1-2-7b;searl|2374791848

[Important:
You need a 20mm heating coil to work with the showerhead. The default size from this seller is 16mm.
When you make the purchase, you have to leave the seller a message saying that you want a 20mm coil. The Coil Voltage and Power Cable will be sent according to your address, so you don't need to worry about that from this seller.]

====================
 
Last edited:

GoombaTroop

Well-Known Member
This is very interesting, thank you @GoombaTroop . Is there any difference in usage / feel between the 14/18mm Male and Female heads? Or is it purely just dependant on the glass to be used ?

The bowl (14mm vs 18mm) just depends on what glass you are using. The glass bowl from DHgate only comes in 18mm. The bowl from NewVape comes in both 14mm and 18mm. But you can always get a converter.

I have both 14mm and 18mm glass bongs from DHgate... so I will probably go with an 18mm male bowl.
 

Pyr0

Stoned Roses
Hey all , New Glass bowls for the FlowerPot are all ready that I had posted about a few weeks ago. Two options , one that will ship from the U.S. for a drop more money and One that will ship from China for a bit cheaper. I vouch for the seller as I have purchased direct from them from China on Dhgate a few times with no issues.

U.S. Shipping 14mm Glass Bowl ( $25) : https://www.ebay.com/itm/253670318393

China Shipping ( $16) : https://www.ebay.com/itm/253670290774

I personally do not have it in my hands yet but a friend of mine does who I trust greatly. The glass is thick and they work well. I should have one in my hands shortly and will post some info when I do.
qcEXBR3.jpg


ehkimKb.jpg

zhosjhT.jpg
Mine arrived today, thanks for the head's up @Justpassedu :tup:
 

invertedisdead

PHASE3
Manufacturer
Budget Flowerpot Showerhead Build

---------------

e-nail: $100 + $13 shipping = $113
Menovo Electric E Dab Nail Rig Bongs Wax Vaporizer With Coil Heater Device Dabber Box For Dry Herbal Vape Kit
https://www.dhgate.com/product/new-...rizer/394135808.html#s1-2-7b;searl|2374791848

[Important:
You need a 20mm heating coil to work with the showerhead. The default size from this seller is 16mm.
When you make the purchase, you have to leave the seller a message saying that you want a 20mm coil. The Coil Voltage and Power Cable will be sent according to your address, so you don't need to worry about that from this seller.]

---------------

FlowerPot ShovelHead - Male Bowl (3097-KIT) = $50
https://www.newvape.com/flowerpot-shovelhead-male

or

glass bowl: $11.25 + $4.15 shipping = $15
https://www.dhgate.com/store/product/11cm-height-blue-honeycomb-percolator-glass/202166626.html

[The bowl (14mm vs 18mm) just depends on what glass you are using. The glass bowl from DHgate only comes in 18mm. The bowl from NewVape comes in both 14mm and 18mm. But you can always get a converter.]

---------------

Showerhead 20mm Head Set (9213) = $100
https://www.newvape.com/showerhead-combo-20mm-2

or

ShowerHead for 20mm Coil (3063) = $60
https://www.newvape.com/showerhead-flowerpot-20mm

+

20mm Coil Nut (3066) = $20
https://www.newvape.com/20mm-coil-nut

[The Showerhead set for $100 comes with the Showerhead, the Coil Nut, and Coil Cover. The Coil Cover is optional. You can save $20 by just buying the Showerhead and Coil Nut separately instead.]

---------------

FlowerPot Stand & Debowler (3004) = $50
https://www.newvape.com/flowerpot-stand-debowler

or

Make Your Own = $0
Example of a DIY version:
http://fuckcombustion.com/threads/newvape-flowerpot-twax-vaporizer.23162/page-435#post-1264763

---------------

You need a glass bong. They come in either 14mm or 18mm. Make sure your glass matches your bowl size.

If you get a 14mm bong, you need a 14mm male bowl. If you get an 18mm bong, you need an 18mm male bowl.

Here are some recommended bongs:

https://www.reddit.com/r/chinaglass/wiki/recommended_rigs

This one looks good:

FC-186
https://www.dhgate.com/store/product/advance-booking-2015-new-high-quality-glass/218127444.html

$47.22 + US $4.14 = $51.36

---------------

OPTIONAL

Titanium ShowerCap Carb Cap (3096) = $40
https://www.newvape.com/showerhead-carb-cap-1

---------------

Cheapest option (not including glass): $113 + $15 + 80 = $208 (plus shipping costs from NewVape for the Showerhead plus maybe some customs fees?)

* All prices in USD
** Shipping costs from DHgate were to Toronto, Canada. Other sellers of the Menovo Kit may be cheaper depending on where you live. Shipping costs vary.

Solid package, can't see how you could really go wrong with it. Doesn't really seem any cheaper than ordering everything through Newvape though. I would add the coil cover and skip the carb cap if you only plan to use flowers.

As for glass vs ti bowls, if going glass, I'd definitely pick up more than one. The last thing you want is to be dead in the water cause your bowl broke. IMO for that reason it's nice to have both. Also with two bowls I can basically get two sessions going at once and just pass the heater around like a lighter.

I have both 14mm and 18mm glass bongs from DHgate... so I will probably go with an 18mm male bowl.

Keep in mind that 18mm glass easily reduces down to 14mm, but to go the other way is a bit clunky. For that reason I tend to divert to suggesting 14mm for anyone with both glass sizes. Also with the pan/shovelhead, you could get the 14mm and 18mm posts and run both sizes that way.
 

Likes2vape

Well-Known Member
With the vrod we are planning on tightening up the clearance between the nut and bowl / heat post. We have been using a .01" clearance and plan on cutting this in half to .005". We will be implementing the necessary plug and ring QC inspection gauges to hold these tolerances. My question to the forum is this a good idea or bad idea???


@newvape918 I wonder if this was done with the vrods out in the wild? Could this be the reason the edges brown more than the center and it seems to get stuck on the post more?
 
Top Bottom