E-Nano from Epickai

[GetLeft]

Shit, the crack comes from the inner side

I don't recall hearing often that a burl has cracked so I wouldn't worry. Beautiful piece!

 

[hafalump]

Is there an aroma cup available? I am not finding it on the site. Can a fellow nano er hook me up with the link??

 

[Hackerman]

Here is the cup. https://epicvape.com/product/aroma-therapy-cup/

And here is their Memorial Day Sale...

Memorial Weekend Glass Sale. 20% OFF + Free Domestic Shipping on orders $50 or more. Code: MDAY18

 

[Crohnie]

I've had my nano for about a month now. I'm quite pleased with it with one exception. Every so often when I am between 7 and 7.5 I get combustion...no flames, just smoke. Then the very next hit...vapor. Weird...This never happened with my previous nano except if I had accidentally knocked the dial up to 9 or so. Not sure what's going on. I'm not taking really slow breaths nor is my herb touching the heater. Any ideas?

 

[Mr. Gweilo 420]

I've had my nano for about a month now. I'm quite pleased with it with one exception. Every so often when I am between 7 and 7.5 I get combustion...no flames, just smoke. Then the very next hit...vapor. Weird...This never happened with my previous nano except if I had accidentally knocked the dial up to 9 or so. Not sure what's going on. I'm not taking really slow breaths nor is my herb touching the heater. Any ideas?

Turn it down. My older unit was comfortable up to 7.5 whereas my newer unit can combust at over 6.5.

 

[slazak71]

hello i got my new cord and e nano is work ON most of the day from 3 days !
great vporizer ! flavour is even better than in sticky brick.
i used before only butane vapors so e - nano was the first table and it was a bit strange for me to pass from butane to real vaporization without any coal taste.( sometimes happen ) Maybe even my gf will start use this vape ! epicvape

 

[vapen00b]

It's moving ...
Will stand by her but it is painful to see that.

 

[howie105]

We are niche group of users in

It's moving ...
Will stand by her but it is painful to see that.

Yep, splitting wood is known to happen with the Nano. On the upside with a little patience EpicVape will make it right, or you can fix it yourself (my solution) with a little glue and some clamps, then there are those folks who jut keep using it split and all. Hang in there, relax and enjoy the ride.

 

[TaterLog]

I know climate impacts the life of a Nano's shell, but could the fluctuation of temps (from cutting the unit on/off) cause it to crack as well?

I have a friend who has left his walnut unit running at 6.5 since it arrived at his home (Fall of 2016) and he has not had any issues. My shell was replaced within 6mo of use (I got mine a week before he bought his) and I cut it on/off daily. I also treated the wood weekly prior to it cracking, where he has never put anything on his.

Now, excuse me as I partake in a few rips of some Gorilla Glue and enjoy this lazy Sunday!



Edited to try and add an image . Doesn't seem to be working correctly. Is it Imgur or user error?

Figured it out!

 

[unsorted]

It's moving ...
Will stand by her but it is painful to see that.

Mine looks similar. I posted about it here:
http://fuckcombustion.com/threads/e-nano-from-epicvape.7844/page-693#post-997319

The crack has not gotten any longer, but it is a slight bit wider. I can slip the edge of a credit card into it now. Mine has a few other voids and imperfections, so the crack doesn't bother me. It's mine and I like it that way.

 

[hd_rider]

While out and about recently I was in one of those touristy gift shops and came across this cute little hand-made bowl. The inside is very 3-D and is just so cool-feeling. After a session, I just find myself mesmerized with it; it's very trippy indeed.

It replaces a simple ash tray I was using to collect the AVB from my nano stem. Now my little "vape station" is complete.

 

[Cstm]

Can anyone compare the performance of the enano to the Tubo Evic? Thanks!

 

[Alegre]

I know climate impacts the life of a Nano's shell, but could the fluctuation of temps (from cutting the unit on/off) cause it to crack as well?

I've been wondering the same. Mine is a walnut and I'm praying it doesn't split.

 

[ataxian]

It's moving ...
Will stand by her but it is painful to see that.

Fill the crack with epoxy!
Panic paw!

NANO if can?

 

[Crohnie]

Turn it down. My older unit was comfortable up to 7.5 whereas my newer unit can combust at over 6.5.

Thanks for the advice. The newer unit definitely runs hotter than my previous nano.

 

[SloJimFizz]

Now my little "vape station" is complete.

Trippy bowl, love the blue flame flowers.
I'm always keeping an eye out for vape station/storage/portability gear while in stores I'd rather not be in. Mrs Fizz stopped questioning things that get placed in the cart.

Can anyone compare the performance of the enano to the Tubo Evic? Thanks!

Both are great units hovering at the top of their respective classes.
Log vs Portable prolly been asked more than a few times in "Ask FC" thread.
Not kosher in vape specific threads.

Going with some Black Lime Special Reserve this Memorial Day cause it's the most military sounding strain I have.
to those who have fallen.

 

[CloudMonet]

Anyone know how long it usually takes Epicvape to ship? I'm not complaining or anything, just trying to plan around some stuff happening this week and next weekend.

[edit] never mind, it shipped today! Ordered on a Friday, shipped next business day.

 

[BabyFacedFinster]

Anyone know how long it usually takes Epicvape to ship? I'm not complaining or anything, just trying to plan around some stuff happening this week and next weekend.

[edit] never mind, it shipped today! Ordered on a Friday, shipped next business day.

I'd think you'd definitely have it before the weekend. Best wishes with it. We'd love to hear how your trial run goes.

 

[slazak71]

i wasnt sure i need more vaporizers then two butanes but this device bringing me to pure vaporization, if somebody would ask me what vaporization is? i would give try shot from e nano

this vaporizer is so friendly, can be use in many ways and both dry and water are master effectives
i like mostly through wwater or dry leaving for couples min full steam on and take one big white shot

for that price/quality/campanyservice im in 100% happy with this product, the only thing i have to change is water pipe but it will be done soon and im not expecting nothing more better for me in long term of timme ,
im fully satisfied with my vaporizers and enano complete the team perfectly

that gonna be good bong for enano ? do i need any extra adapter for 18 ?

 

[SloJimFizz]

Glad your enjoying your Nano @slazak71 It really is an awesome tool.
That bubbler will work just fine.
You just need to get one or more 18mm gongs and your set. Perhaps a carb adaptor from TAG for easier carb popping.
New batch of Chendawg in the Nano for a pre day stem. Enjoy the day all.

 

[Alegre]

Hey guys!

When you clean the stems, do you remove the outer silicone thingy?

 

[howie105]

Hey guys!

When you clean the stems, do you remove the outer silicone thingy?

I got this stem as a backup and It came with one of the ends broken off so I finally just added the red "O" rings and a cover over the broken end. Anyways the mixed bag of silicone parts has lasted just fine with daily ISO cleaning.

 

[dizin]

Hey everyone,

I reached out to Epic a few months ago via their website and never got a reply about my Nano that stopped working, but thankfully it started up again so I never followed up. Here I am now and my Nano is officially not working !! but I can't seem to get in contact with customer service. I sent an e-mail last Wednesday but still have not heard back. My Nano is still protected under warranty, please help!

Thank you!

Also just to throw it out there for any potential buyers, I have had wonderful experience with customer service in the past. Last time I e-mailed them (before all this) was a couple years ago when I dropped a stem I had just ordered. I received a response within a day and they threw me a free stem with my next order which was fantastic. I am just really missing my nano!

 

[Alegre]

I got this stem as a backup and It came with one of the ends broken off so I finally just added the red "O" rings and a cover over the broken end. Anyways the mixed bag of silicone parts has lasted just fine with daily ISO cleaning.

Hi!

Do you dip the stem in iso or just wipe everyday?

Thanks!

 

[howie105]

Hi!

Do you dip the stem in iso or just wipe everyday?

Thanks!

I have two aluminum fuel bottles, one with really old dirty ISO and one with cleaner ISO, the stem gets submerged in both in turn and agitated. Then the stem gets water rinsed and wiped dry. Takes a bit of time but its part of that whole tools maintenance thing I have.

Wow that sucks, I seemed to remember their company representative checking in last week or so. I paged back a screen and found this.

Hi there! We're experiencing some website issues that have lead to some mail issues. I am actually finally able to see your two emails this morning. So look for a response shortly but I will post some of it here in case anyone else has the same issues you're experiencing.

1. Our product page does show that it is a 110v product and the FAQ section also states you will need a converter. We do not sell converters however, many people on here use them and may be able to suggest a budget friendly option.

2. Your item is most likely still in customs waiting for you to pick up. This happens quite a bit and you should receive a message from your local office letting you know if there are any applicable duties/taxes due.

I hope this helps!

Nadia

Good Luck, hope it all plays out soon.