Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer

Oogendoogan

Well-Known Member
I believe upgrades are for the good of everyone. Even though it does suck to feel like VAS has subsided just to come on FC and see the VROD lol :lol::clap: I couldn’t be happier! Since I do not like to do dabs on my flowerpot, or anything other than a quartz banger (go 25mm enail coils!) I will be sitting out the VROD purchase at first. But if for some reason it seems like the VROD is superior for flower, Newvape has my money. @Justpassedu I know anything you say is just personal preference from testing but your opinion is very trusted. What do you think? For flower only is the Vrod an upgade over the SH? If so how? I imagine it probably isn’t.. i would imagine they are equal for flower but please let me know what you think. I’m very happy for you double decker lovers out there! Your getting what you asked for in the Vrod. Enjoy :tup:

Hope everyone’s having a good night.

Peace :peace:
 

Justpassedu

Well-Known Member
@Oogendoogan i had mentioned it 1 page back but no it is virtually the same with flower as the Sh . Anyone with buyers remorse should think of this as not a upgrade but just another option to choose from, like the Sublimator vape. They have different heads and iterations of there vape that basically all do the same thing in different ways to suit different needs. This doesn’t put the Sh to sleep it is just another option for everyone .
 

SunnyHours

Well-Known Member
How hard/easy is it to combust in the FlowerPot? With the ShowerHead or WrapAround? I'll have both :)
 
SunnyHours,

psychonaut

Company Rep
Company Rep
How hard/easy is it to combust in the FlowerPot? With the ShowerHead or WrapAround? I'll have both :)

Easy enough under the right conditions

Upper 700F+ range
Bone dry material
Finely ground
Full bowl to the brim
Slow draw
Carb cap for extra smoke!

Combining all of those together and you likely have at least charring and some smoke.

I would say either is capable but the SH would have the most access to airflow over the material to char/combust.
 

graydeh1

REP for TRVP ATTY, Shellshock/Tectonic and more.
Company Rep
$ 5 Dollars is just a place holder , I wish... lol


It's coming get ready soon. Been in some testing for awhile now and I can say it is amazing. Best of both worlds incorporating the Shower Head with a head that can fit Dnail Sic halo and larger dishes with similar airflow to the Showerhead and a new way to heat everything as there is no more center post. It was designed so the NV coil locks in and makes great contact with the head and nut. Just a quick example but you can see how the coil fits into the shape in this pic as it was made and designed to fit the coil perfectly :
yDWROfY.jpg
I have the shovel head 20mm and WA headset which is great.

If I decide to add the vrod do I just need the vrod head and my sic dish from the WA headset?

Edit: hey @newvape918 @Justpassedu , heres the specs for my highfive coil:
  • Height: 12.7mm
  • ID(inner diameter): 20mm
  • OD(outer diameter): 26mm
quess it wont fit? Newvape.com says it will fit a 17 mm height.

Also my coil listed above does not thread all the way on to the WA head (its 1 full turn from threading completely, but works really great), was it designed to just thread as much as possible until all is tight?
 
Last edited:

Justpassedu

Well-Known Member
I have never com-busted using any version of my FP although I never take my temps higher than 700F , it could happen though under the circumstances members listed above but I think you'd really have to be trying to do so. It's not the easiest task but I did however com-bust last night thinking I could pack my Sticky Brick and bring it to bed for a late night hit if I wake up in the middle of the night. Well at 3am I woke up , took the torch to the Sticky brick and com-busted, taste like ass. Now I have some cleaning to do, I was looking for that lung busting quick hit to get me back to bed.
 

psychonaut

Company Rep
Company Rep
@Justpassedu perhaps you could uptemp your vrod setup? Load the dab in cold, turn the PID on, take some hits while it's preheating and by the time it's all preheated you should be done.
 
psychonaut,
  • Like
Reactions: steama

Doktor Dub

Well-Known Member
It is good to know I can always buy the VROD if it is exceptional with flower.

As much as i don t want to spend more money (have ANY money) - if i am really honest this sums up my feelings pretty well.

How hard/easy is it to combust in the FlowerPot? With the ShowerHead or WrapAround? I'll have both :)

It is definetly possible but very controllable. will not happen unintentionally several times. Personally i think every vape has to have the ability to combust to be able to dial it in for every style of use...

Exciting times with the new VROD :rockon:
 

Justpassedu

Well-Known Member
@Justpassedu perhaps you could uptemp your vrod setup? Load the dab in cold, turn the PID on, take some hits while it's preheating and by the time it's all preheated you should be done.
Well I'm at work all day but for you I can try it sometime if that interests you. In all honesty I am not so much a fan of the up-temping , I recently got a few different inserts to try the whole up temping thing in my 35mm banger and it just did not do it for me. Whispy hits is what I got with maybe one really nice fat rip but I am no expert either so who knows If I was doing it right. Also the method you want me to try would only work once and than I'd have to turn the pid off again and wait for a cool down if I wanted to do it again. The hex-nail works a bit better for uptemping with the different modes it provides but currently my coil is not compatible with it for the Vrod .
 

invertedisdead

PHASE3
Manufacturer
Well I'm at work all day but for you I can try it sometime if that interests you. In all honesty I am not so much a fan of the up-temping , I recently got a few different inserts to try the whole up temping thing in my 35mm banger and it just did not do it for me. Whispy hits is what I got with maybe one really nice fat rip but I am no expert either so who knows If I was doing it right. Also the method you want me to try would only work once and than I'd have to turn the pid off again and wait for a cool down if I wanted to do it again. The hex-nail works a bit better for uptemping with the different modes it provides but currently my coil is not compatible with it for the Vrod .

https://www.instagram.com/p/BaczohyH3Vj/?tagged=eternalquartz

If your getting wispy uptemp hits the temp is probably set too low, you gotta set the PID a good bit higher than you would normally dab at to allow the heat to transfer.
 

Justpassedu

Well-Known Member
https://www.instagram.com/p/BaczohyH3Vj/?tagged=eternalquartz

If your getting wispy uptemp hits the temp is probably set too low, you gotta set the PID a good bit higher than you would normally dab at to allow the heat to transfer.
Ty , how much higher would you normally go with a insert compared to straight dabbing off the dish ? I am at 580F now using the 35mm banger and did not really raise temps much only 20 degrees. What I liked to do with the Flower Pot and Dnail Sic halo when I had it hooked up to the hex-nail was use glob mode during a hit and have it ramp up the set temp by 40-50F while taking a dab, I'd start low and hit that glob mode button.
 

graydeh1

REP for TRVP ATTY, Shellshock/Tectonic and more.
Company Rep
Ty , how much higher would you normally go with a insert compared to straight dabbing off the dish ? I am at 580F now using the 35mm banger and did not really raise temps much only 20 degrees. What I liked to do with the Flower Pot and Dnail Sic halo when I had it hooked up to the hex-nail was use glob mode during a hit and have it ramp up the set temp by 40-50F while taking a dab, I'd start low and hit that glob mode button.
That glob mode sounds good, im at about 720f now with the WA and thats 2 amazing hits with a double decker, there is still trace amounts of oil vapor so I feel like I want to ramp up some to finish the dab.
 

invertedisdead

PHASE3
Manufacturer
Ty , how much higher would you normally go with a insert compared to straight dabbing off the dish ? I am at 580F now using the 35mm banger and did not really raise temps much only 20 degrees. What I liked to do with the Flower Pot and Dnail Sic halo when I had it hooked up to the hex-nail was use glob mode during a hit and have it ramp up the set temp by 40-50F while taking a dab, I'd start low and hit that glob mode button.

They usually drop the insert right after torching the banger so you might try more like 680-700F. Adjusting the PID temp should just heat the insert faster.

edit: Anyone try unscrewing the Halo and just set it on the WA for uptemps? :brow::science:
 

mixchu69

Well-Known Member
For everyone that is upset about the release of the Vrod, please remember that you might have to purchase additional gear, like the newvape controller and coil (not sure if there are other coils that fit as intended). The one great thing about the showerhead and wraparound was that I already had a controller and 20mm barrel coil, making the cost that much more reasonable.
 

Justpassedu

Well-Known Member
They usually drop the insert right after torching the banger so you might try more like 680-700F. Adjusting the PID temp should just heat the insert faster.

edit: Anyone try unscrewing the Halo and just set it on the WA for uptemps? :brow::science:
Ty , Ty I'm trying it tonight after work, cant wait. I personally wouldn't be able to try that with my Halo bc it does not slip over the threading so easy, I have to kind of twist mine on by hand as it is a bit tight but I am not sure if everyone's is like this. If it slipped right over I'd give that a try bc it's a good idea.
 

Slagzord

Don't fuckle with shuckle
Well, this all makes my eventual upgrades to my FP a bit easier. I was going to pick up the SH to try it out, but if the vrod works with the Auber 20mm coil - and I see no reason why not - then the Vrod and a Dnail dish it shall be.

@SunnyHours although I can totally feel for you, there was no real way to know and you shall not be disappointed. The FP in any configuration is the way to go and whatever version or set up you have will be more than adequate. What you have is a face melting bastard of a vaporizer.
 

Justpassedu

Well-Known Member
Well, this all makes my eventual upgrades to my FP a bit easier. I was going to pick up the SH to try it out, but if the vrod works with the Auber 20mm coil - and I see no reason why not - then the Vrod and a Dnail dish it shall be.

@SunnyHours although I can totally feel for you, there was no real way to know and you shall not be disappointed. The FP in any configuration is the way to go and whatever version or set up you have will be more than adequate. What you have is a face melting bastard of a vaporizer.
It does not work with a Auber coil. Only the Newvape coil or a coil with the same wrap direction and a height of 17mm. You can purchase a NV coil cut the ends off the Auber coil and solder them to the NV coil with the same wiring and it will work with your enail.
 

Zementos

Well-Known Member
Was too busy with moving and to lazy to write something, but I think its time for a little report although I don't really know what to say that hasn't already been said..

So I've had the flowepot for little over a week now and it feels like its been designed just for me. I was naturally in tune with it from the get go. Didnt have to adjust draw strength or anything. Set it to 700 and everything was just perfect. Also tried 550 and 666 after that and it just delivers.
I showed it to some friends, most of whom are comubsting(eu style, w tobacco etc.) and everyone loved it.

My guess regarding the vrod is that it will just be the more expensive head. So even if it does the same as the SH and WA without drawbacks no head will be obsolete. It'll be the best twax head though for sure.
So even if I'm perfectly fine with SH and WA and really don't need the vrod I can already feel vas creeping up..damn you new vape..
 
Last edited:

graydeh1

REP for TRVP ATTY, Shellshock/Tectonic and more.
Company Rep
It does not work with a Auber coil. Only the Newvape coil or a coil with the same wrap direction and a height of 17mm. You can purchase a NV coil cut the ends off the Auber coil and solder them to the NV coil with the same wiring and it will work with your enail.
Can some1 make a step by step with pics if they do this. I want to use a newvape coil on my highfive enail.
 

Slagzord

Don't fuckle with shuckle
It does not work with a Auber coil. Only the Newvape coil or a coil with the same wrap direction and a height of 17mm. You can purchase a NV coil cut the ends off the Auber coil and solder them to the NV coil with the same wiring and it will work with your enail.

Well, that's a bummer. :(

Good to know it is just a solder job and prolly some shrink tubing to get it rolling. I'm sure I can figure that out even if my soldering skills have atrophied a wee bit since college.
 

snamuh

ghost
Like others... I probably would have just bought the vrod if I knew it was coming out. They probably would have gotten more money from me as well since I probably would have gone with their whole kit set up instead of auber.

Anyway...

I've had my fp, sh, and wa for awhile now.

My sh gets all the use. And I really haven't used CBD isolate at all since getting the fp as I have gotten hemp flower and have no need for it.

I am amazed at how it can micro dose. I just put a few specs of herb in the bowl... (Thc strains). And it Vapes it evenly.

With hemp flower I pack the whole thing. And it's amazing. I just wish my hemp flower was top shelf quality! (Cough... Hit me up Maine, Mass, VT)


It truly is an amazing vape.

... Kind of wishing I got the spoon/scoop.

Edit:
All this time I've been thinking about d abing CBD isolate with thc flower....

I need to try thc concentrate with CBD/hemp flower!
 
Last edited:

Oogendoogan

Well-Known Member
@Oogendoogan i had mentioned it 1 page back but no it is virtually the same with flower as the Sh . Anyone with buyers remorse should think of this as not a upgrade but just another option to choose from, like the Sublimator vape. They have different heads and iterations of there vape that basically all do the same thing in different ways to suit different needs. This doesn’t put the Sh to sleep it is just another option for everyone .
Thank you for this. Looks like I’ll be sticking with my auber and showerhead for now. I’m honestly still very interested in the VROD even though I don’t do double deckers much. I feel like it would be good to have and I’ve been considering a wrap around anyways. Looks like this is the head I’ll get if I do decide to get another. I appreciate the quick response and we all appreciate the testing. Your opinion is always valued here and you have always given me great advice. Looks like the Vrod is gonna be amazing and I’m sure part of that is from your testing. We all thank you :)

I just wanted to add I think that it’s kinda lame that the Vrod only works with newvapes coils because I believe that the 5 pin XLR with the wiring Dnail uses should be standard. I don’t own any mini XLR stuff and I do not plan to. I guess if I got the v rod a sottrring job would be in order. That’s a fine solution and I’m sure I could figure it out, but there’s gonna be a lot of people doing this. Newvape could make some quick cash if they got adapters or sold a coil that worked with a standard XLR box like the Dnail or auber or hexnail. They could charge at least like $50-$70 and people would buy them. They’re gonna need that specific size coil for the VROD. Just an idea instead of giving that money to other coil companies. And yeah you sell a coil for them to solder with, but I think there is more money to be made if newvape would offer everything you need because people are gonna end up buying a new vape coil; a standard XLR coil and then soldering them when newvape could just sell a more expensive option for people who don’t use their mini XLR. Basically people would pay for the convenience of not having to source two coils and solder. Just a thought, cuz I will not buy a new vape box.. I have 2 auber controllers and a basically useless errlectric that has tought me to stay the fuck away from proprietary coils.
 
Top Bottom