• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Discontinued Haze Square

WakeAndVape

VapeLife X
Those are huge bowls haha. I never thought them to be so big. I hope the microdosing is released soon. Curious how those will work and look.
for a bit of perspective on size...the chamber is the size of a US dime.

Everyone that tried it was impressed, no bad draws. We tried hard fast draws, slow draws, sippy draws, they all worked. No real technique needed.
THAT is what I'm looking for out of my experience!
Did you get the updated firmware as well?
AFAIK they did... Luckily with the new technique I have been having some AMAZING sessions even on low temp, I just have to see if battery life changes...But with the 10year warranty I'm not super concerned and the true cause of the issue should emerge with further use.

Overall: happy with the Square.
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Yeah doing the double press can work well for me too, but can easily overdo it then, getting over cooked at low low temps even. I'm going to try starting at upper temps without temp stepping as I usually do. I am sure I will find a way this works best for me, there is always a learning curve with a new vape and the square is extremely new in every way. Despite whatever imperfections mine has, I am still impressed with this product not to mention the company.
 
Last edited:

retteric

New Member
So I noticed that the battery is user replaceable, but not by the most intuitive means. Sounds like you need to open up some internals to replace.

However, the warranty states
  • The internal security seals of the unit are broken. You can avoid this by not opening the outside covers of the unit. Disassembling the unit will void the warranty.
Does replacing the battery, hence, void the warranty?
 

Haze Vaporizers

Well-Known Member
Manufacturer
So I noticed that the battery is user replaceable, but not by the most intuitive means. Sounds like you need to open up some internals to replace.

However, the warranty states
  • The internal security seals of the unit are broken. You can avoid this by not opening the outside covers of the unit. Disassembling the unit will void the warranty.
Does replacing the battery, hence, void the warranty?
This applies to Dual. The Square battery is user replacable and we sell the extra batteries.
 

KLo

No Ember
After a week's dedicated use and several charges on the block i still haven't deep cleaned. Ha! Don't know if anyone's tried/posted but in a curious and procrastinative state flipped the top screens (sticky as they were) and reassembled the upper seal :D This not only saved me a deep clean, but was able to utilize risidual oils in the second, third, fourth...and still going rotations. I did brush out each bowl after the loads were finished, examining for clogs through usage. The only issue was resin and by turning the screens, you get a clean surface to work with ! Plan on going through as many pods until things get hot, or taste shifts or clogging forces the inevitable clean. Avoid turning over screans with any botanicals stuck on as it may cause ill effects, combustion, flare-ups, etc

For Haze -
Suggestion: make the blnking LED color match the current temp color while heating. Based on only a few days use, starting a new bowl at the wrong temp because the last use was finishing off a prior bowl at a high temp was a common mistake

I dig. My Square defaults to the lowest (blue) setting every power up. Thought it would remember the last setting, but :shrug: seems an easy fix. Your idea of color sync is a completely do-able !
Not a big deal. So many great features to focus on.
 

Shit Quiet

New Member
Can not wait for my haze square to arrive. It
This applies to Dual. The Square battery is user replacable and we sell the extra batteries.
Quick question for you guys. I know this may sound dumb but once I receive my haze square do I need to register the vape in order to qualify for the upgraded haze square whenever an updated version is available or do I just wait until the day ya make another haze square then email ya to receive the free upgrade?
 

Barnacleaz

Member
After a week's dedicated use and several charges on the block i still haven't deep cleaned. Ha! Don't know if anyone's tried/posted but in a curious and procrastinative state flipped the top screens (sticky as they were) and reassembled the upper seal :D This not only saved me a deep clean, but was able to utilize risidual oils in the second, third, fourth...and still going rotations.

+1 for "procrastinative". Hopefully I will check once a week, which probably means I'll remember every other.

Anxiously waiting for mine to leave the shop again so I can start comparing notes with the pros here!
 

Stu

Maconheiro
Staff member
I must admit that I was somewhat disappointed when I first got my production model. It didn't perform as well as the beta unit I've been testing. Well, I sent it in to Haze and got it back today. They fixed whatever was wrong with it and I'm happy to report that it now performs great. I'm just one data point, but I'm a satisfyingly stoned point of data if that means anything. :ko:

Keep up the great work, Haze.

:peace:
 

Shit Quiet

New Member
I must admit that I was somewhat disappointed when I first got my production model. It didn't perform as well as the beta unit I've been testing. Well, I sent it in to Haze and got it back today. They fixed whatever was wrong with it and I'm happy to report that it now performs great. I'm just one data point, but I'm a satisfyingly stoned point of data if that means anything. :ko:

Keep up the great work, Haze.

:peace:
Awesome This gives me great hope. Haze is legendary :rockon:
 

MonkeyTime

Well-Known Member
After a week's dedicated use and several charges on the block i still haven't deep cleaned. Ha! Don't know if anyone's tried/posted but in a curious and procrastinative state flipped the top screens (sticky as they were) and reassembled the upper seal :D This not only saved me a deep clean, but was able to utilize risidual oils in the second, third, fourth...and still going rotations. I did brush out each bowl after the loads were finished, examining for clogs through usage. The only issue was resin and by turning the screens, you get a clean surface to work with ! Plan on going through as many pods until things get hot, or taste shifts or clogging forces the inevitable clean. Avoid turning over screans with any botanicals stuck on as it may cause ill effects, combustion, flare-ups, etc



I dig. My Square defaults to the lowest (blue) setting every power up. Thought it would remember the last setting, but :shrug: seems an easy fix. Your idea of color sync is a completely do-able !
Not a big deal. So many great features to focus on.

I love the thought, but the first thing that came to mind is that the reclaim on the back will just work it's way down the short vapor path. Let us know how this works after a few!
 

Petunia Vanish

Well-Known Member
I must admit that I was somewhat disappointed when I first got my production model. It didn't perform as well as the beta unit I've been testing. Well, I sent it in to Haze and got it back today. They fixed whatever was wrong with it and I'm happy to report that it now performs great. I'm just one data point, but I'm a satisfyingly stoned point of data if that means anything. :ko:

Keep up the great work, Haze.

:peace:

Have any photos of beta version?
 
Petunia Vanish,

RogueGuy

Well-Known Member
Accessory Maker
Got mine back today. After a rough start, 2 combustion events in a couple minutes on the highest setting, I now am getting good hits with good vapor and they pack a punch.

Agreed that loose fill is better. I have not tried 1/2-2/3 bowls yet.

I'm using the middle to top preset temps. Not drawing until green and holding the button.

UPDATE: been playing around with technique, specifically the double press. I found that this works great at lower temps, found a few black specs at high temps. Really happy with the performance overall so far.

Ran out of batteries way too soon. @Haze Vaporizers can you keep this unit plugged in all the time like a phone so it is always full or will that mess up the battery?
 
Last edited:

Haze Vaporizers

Well-Known Member
Manufacturer
Got mine back today. After a rough start, 2 combustion events in a couple minutes on the highest setting, I now am getting good hits with good vapor and they pack a punch.

Agreed that loose fill is better. I have not tried 1/2-2/3 bowls yet.

I'm using the middle to top preset temps. Not drawing until green and holding the button.

UPDATE: been playing around with technique, specifically the double press. I found that this works great at lower temps, found a few black specs at high temps. Really happy with the performance overall so far.

Ran out of batteries way too soon. @Haze Vaporizers can you keep this unit plugged in all the time like a phone so it is always full or will that mess up the battery?
You can keep it charging at all times.
 

django7

Well-Known Member
I had the seal repaired already and I readjusted it myself last night to make sure every thing was copestetic.

I personally think my coil isn't keeping a consistent temperature under normal conditions.

I may just shoot an unlisted video later to show what I mean... it sure beats the hell out of explaining it.
I tried doing the extra button press during the draw, and vapor went way up. So this does have a strong effect.

But why? Does the extra press override the temperature setting or just help it keep the set temperature?

Anyway it works, so thanks for the info :)

——

PS What size are the hex screws on the battery compartment? Anyone?
 

Squatch

Exister
After using this wonderful device for the past couple weeks I have encountered a couple combustion events. Every time I’ve had it combust I’ve had the button on the bottom (which puts the herb in the pod directly above the coil in the bottom of the pods). Using the button on the top the herb is resting on the stainless steel filters and not directly touching the bottom of the pod itself...giving space between the herb and coil. So I’m just using it with button on top now, not had any more combustion events. :leaf:
 

Volteric

Well-Known Member
I love the thought, but the first thing that came to mind is that the reclaim on the back will just work its way down the short vapor path. Let us know how this works after a few!

This is why I think cleaning this very 3rd full 4 chamber session is necessary for optimal experience. Otherwise, like you said, resin gets into a variety of nooks and crannies.
 

WakeAndVape

VapeLife X
IT'S A CELEBRATION BITCHES!

I decided to clean my square while it was charging today (just because).

Instead of JUST removing the screens and dishes...I decided to take out both silicone inserts and rinsed them with water.
(there were a few crumbs underneath both inserts)

after i dried everything off i loaded up all four bowls and went to press the button and i had an instant combustion pull, i made sure I wasn't covering the air intake and pressed the button and it combusted right away again.

I removed the rubber seal that holds the bowls again and placed it one more time...

after that...the fucking square works perfectly (like I've seen others post) the double press does add a little gas, but causes instant charring (on high) at least taste wise.

not sure what inside the vape was misaligned, but I'm glad it's working!

I tried doing the extra button press during the draw, and vapor went way up. So this does have a strong effect.

But why? Does the extra press override the temperature setting or just help it keep the set temperature?

Anyway it works, so thanks for the info :)

——

PS What size are the hex screws on the battery compartment? Anyone?
when you press the power button you can see the coil glow (in a dark setting) when the vape reaches temp it stays active for a moment and then the coil dims out for the remainder of the draw.

when you double press it, it starts to heat all over again and keeps the coil glowing longer
...I also think that when you draw while it's heating, the coil gets hotter compensating for the cool down by your draw...this is all speculative though.

the hex size is 2mm.
 

RogueGuy

Well-Known Member
Accessory Maker
After a night, and half a day, and a lot of trial and not much error , I am really impressed with the Square.

This thing messes me up!!

I found that if you just take nice long even draw at low temps it just extracts the bowl really perfectly and evenly no burning. I dont get a ton of vapor but a lot of effect and flavor.

I also really pushed it with double and triple presses to produce some big hits with minimal charing.

@Haze Vaporizers what would be the chance of a setting that when you hit the button it just started to get hot real slowly and gradually and then just built up to like 400 like a mechanical mod?

Also love the idea that somebody posted about having the temperature light go on when you press the button or just get rid of the blue light and have the on light be the current temperature
 

KLo

No Ember
first thing that came to mind is that the reclaim on the back will just work it's way down the short vapor path. Let us know how this works after a few!

After a few rotations (•••• - ••• - •• - •) w/ screens flipped in the lid portion as a test..all worked out b4 a deep clean. Minimal resin build up, as expected, but fully contained (!) by the solid screens..oh-oh
...:p iso soaked anyway then got back to business

Man, after that deep clean I’m back to fresh, flavorful hits. I fill 3/4, somewhat loose. I’ve had the same experience with spot charring when packed too tight. The Square has I think a perfect draw resistance.
word
 
Last edited:
Top Bottom