TENZEN

Member
my nano has a new tool for medicame .. when I thought there was nothing more comfortable for my home than the nano surje el chewy. :D
image.jpg


image.jpg
This is a great set up can you tell me what kind of Aroma therapy scents you use?
 

Dynavaper

Karma Farmer
hello guys ! after 2 weeks i reciveed my buety enano =)
my question is how tourn it on ? i got reductor 220 to 110 but enano does not light up... only conventer is hot...any idea ? =)

Stupid question (maybe), but have you tried turning the dial to e.g. 6? Does it heat up then? The e-Nano is switched ON by turning the dial.
 
Last edited:

slazak71

Well-Known Member
Stupid question (maybe), but have you tried turning the dial to e.g. 6? Does it heat up then?
enano is not heat up and dial is off all the time...

adapter should be aswell for 110 v ? adapter is for 220-250v as i can see on sticker
a>

a>
 
Last edited:

Dynavaper

Karma Farmer
I cannot see the images unfortunately, but if you turn the dial on and e-Nano does not heat up, then you either have a customer service issue or your converter may be broken. I wonder why the converter gets warm/hot without the e-Nano even starting...?
 

ataxian

PALE BLUE DOT
thanks guys ! i will try it tomorrow and let you know how is going, greetings from eu =)
I love the NANO 4 FLAVOR and general use!

Right now my NANO is set 2 6.375 4 the strain I'm enjoying.

DUTCH TREAT +NANO 6.375 + FC186 + ASH COLLECTOR (tornado action) = CIVILIZED

Note: 18mm GonG packed loose 4 air flow however full of CANNABIS

Level:7.452613425 out of 9.995 (need it to expand my mind)!

F^CK it taste like CHOCOLATE + GRAPEFRUIT + ORANGE. (however not that bad?)

Normally DT is grown in door's.
This was grown outside by the water's edge (Pacific Ocean KINE) cheaper where I live!
 
Last edited:

Whissmu

Well-Known Member
This is a great set up can you tell me what kind of Aroma therapy scents you use?

I am rotating between 3 essences; jasmine, lavender and roses .. my favorite is the jasmine! because my house just smells of fresh countryside of the mountains and in a few hours the fragrance of my aromatherapy invades my house including my terrace :worms:!
my house left to be a smoker to be a steam home .... what not everyone knows is that 80% of the vapors go through my lungs with THC..Jis, jis, jis :rofl:

@Whissmu

What is that rectangle black device?

What temp do you use for aromatherapy?

And how long does a bowl of wax+aroma last you?

-It's the Chewy2 grinder -> http://fuckcombustion.com/threads/chewy-2-0-portable-electric-grinder.25460/page-14#post-1243528

-The same one that I use for my flowers-> 5,20 - 5,40 (and could lower the dial even more ... per not it will stink so much ... jjjejej)

-The amount you see in the photo (half of the bowl) can last approximately with dial to 5.40 -> two days


enano is not heat up and dial is off all the time...

adapter should be aswell for 110 v ? adapter is for 220-250v as i can see on sticker
a>

a>

i do not see the photos as they told you ... but be careful with the converter :goon:! I would not be the first to cause fire due to bad connection, be careful :doh:... I, as a European, use a converter from 110v to 220v and do not connect it backwards or I will have a big scare :bang:
 

ataxian

PALE BLUE DOT
I am rotating between 3 essences; jasmine, lavender and roses .. my favorite is the jasmine! because my house just smells of fresh countryside of the mountains and in a few hours the fragrance of my aromatherapy invades my house including my terrace :worms:!
my house left to be a smoker to be a steam home .... what not everyone knows is that 80% of the vapors go through my lungs with THC..Jis, jis, jis :rofl:



-It's the Chewy2 grinder -> http://fuckcombustion.com/threads/chewy-2-0-portable-electric-grinder.25460/page-14#post-1243528

-The same one that I use for my flowers-> 5,20 - 5,40 (and could lower the dial even more ... per not it will stink so much ... jjjejej)
-The amount you see in the photo (half of the bowl) can last approximately with dial to 5.40 -> two days




i do not see the photos as they told you ... but be careful with the converter :goon:! I would not be the first to cause fire due to bad connection, be careful :doh:... I, as a European, use a converter from 110v to 220v and do not connect it backwards or I will have a big scare :bang:


My wife from FRANCE always put's JASSMINE in her POTPOURRI Machine.
I do ROSIN before bed to be CIVILIZED.

After a GonG of FLOWER.

My wife never has tried CANNABIS?

She is hot so I'll keep her. (very good shape?)

I want to move back to FRANCE?

She think's CALIFORNIA is a better environment! (My family is here)

DUTCH TREAT from HOLLAND however grown outside. (CALIFORNIA)

NANO 6.25 tonight = CIVILIZED (POV)

DA wine is good here?
+ ZIP'S R cheap

Too HOT though? (no winter this year)
 

slazak71

Well-Known Member
i do not see the photos as they told you ... but be careful with the converter :goon:! I would not be the first to cause fire due to bad connection, be careful :doh:... I, as a European, use a converter from 110v to 220v and do not connect it backwards or I will have a big scare :bang:

i was in eletric shop once again and guy there said , everyting should be ok... i got conventer 220v to 110v and cant udenrstand why you suggest to put convetner 110 to 220 if the power hole is 220v in europe and e nano works on 110, so i should reduce power to 110 from 220 before it target e nano. Same was written by epicvape to buy conventer reducing power to 110v. Im wrong ? anyway big thanks for help :tup: hope everyting will be good with my enano and there is a easy answer to get started my enano, right now i dont know what to do else ...
5eki0630jo3d.jpeg
 
Last edited:

ataxian

PALE BLUE DOT
Maybe we can get your French no vaping wife together with my Cajun doctor no vaping wife and blow their heads off with copious amounts of vape bong rips. They're n00bz tho so we may have to be careful .
0ZiV4oc.jpg

I had a crew on my POOL this week
SWIMMING soon being well MEDICATED with NANO from: EPIC!.
CIVILIZED!

6.15243675 4 this mix of GSC + DUTCH TREAT + RAINBOW + CALIFORNIA RED MIXED = MEDICTED
 

Whissmu

Well-Known Member
i was in eletric shop once again and guy there said , everyting should be ok... i got conventer 220v to 110v and cant udenrstand why you suggest to put convetner 110 to 220 if the power hole is 220v in europe and e nano works on 110, so i should reduce power to 110 from 220 before it target e nano. Same was written by epicvape to buy conventer reducing power to 110v. Im wrong ? anyway big thanks for help :tup: hope everyting will be good with my enano and there is a easy answer to get started my enano, right now i dont know what to do else ...
5eki0630jo3d.jpeg

convert 220v to 110v for nano or 110v of your nano converted to 220v does not matter what you say ... I wanted to say do not connect your nano to 220v or your 110v (usa) plug to your european wall.

my converter is different from yours ... mine has two plugs; one for 110v (the nano) and another for 220v (household plug) :goon:

I can only warn you to be careful not to confuse the devices with the voltage that correspond
sorry if not was clear or or confused him even more .. :bowdown::bowdown::bowdown:
 

Sparkpug

Well-Known Member
@Summer

I ended up buying a kit from glasslung.com, because most of my rubber stuff is not food safe and probably is not the best choice for sealing a fitting inside the air path. I also need to revise my DIY setup to change where I put my downstem. Putting it on the side to replicate the oil barrel concentrate rig I had turns out to really pale in comparison next to the percolator that comes with the Glass Lung kit. The percolator is a 3D printed half doughnut ring with holes that fits perfectly inside the jar and offers a rather amazing and even percolation effect. I can absolutely fill my jar with excessive vapor now.

For the mouthpiece I took one of my vapor hose fittings, slid the silicone bowl fitting thing the kit comes with over it and stuffed it into the open 14mmish (any 14mm male gong fits with the silicone sheathe thingy over it for a good seal), then I added my own tubing and attached my Sneaky Pete globe's mouthpiece (don't care for the globe but love the mouthpiece!) into the tubing's end. I did throw out the hookah hose it comes with, it reeked of chemicals and I had never intended to use it -why use plastic when I have glass?!

The lid seems really stable and it comes with a silicone gasket that fits over the top lip of the jar perfectly making it super waterproof (my DIY isn't 100% water tight cause the gasket doesn't stay in place well enough after tightening the jar's lid.) All in all, I really like this setup. My E-Nano is super secure on top of the lid's 14mm intake fitting -it's actually an 18mm to 14mm female adapter sealed with a gasket inside a cup (with a nozzle on the bottom to attach tubing to the percolator) but looks easy enough to modify to put your own piece inside. However, after using the included perc I lost my desire to modify it. It works super well on its own.

It has a magnet on the top to hold a lighter or dab tool but it really isn't strong enough to hold the E-pick in place, which is kind of a bummer. As for other negatives... I don't really have any. It takes all the work out of making a mason jar bong and it does so rather well. I think it pairs super nicely with my E-Nano. But the best part is that the lid fits on any wide-mouth ball jar. From the pint sized one I have up to a gallon. It also looks so much prettier than my DIY setup. Plus, since the lid is a 3D printed plastic it doesn't have a sharp edge like the stock lids do. I was cleaning my jar yesterday and cut my fingertip. It's shallow, but the ISO didn't care...

I bought a carb cap adapter with a 10mm fitting from Thick Ass Glass so I could skip drilling anything into this very nice looking lid.

Sorry for the wall of text :)
 

slazak71

Well-Known Member
convert 220v to 110v for nano or 110v of your nano converted to 220v does not matter what you say ... I wanted to say do not connect your nano to 220v or your 110v (usa) plug to your european wall.

my converter is different from yours ... mine has two plugs; one for 110v (the nano) and another for 220v (household plug) :goon:

I can only warn you to be careful not to confuse the devices with the voltage that correspond
sorry if not was clear or or confused him even more .. :bowdown::bowdown::bowdown:

yea yea i know to not connect e nano to 220v
the only way i connected my e nano was by conventer on the picture :) i will try text epic vape in mondey, maybe they will help somehow :science: have a good sunday everyone and once again thanks for your help :nod:
 

hd_rider

Well-Known Member
is it normal for the E-Nano to get too hot to hold after 7/10?

One of the things I don't like is how hot the eNano gets during prolonged use. Granted, the wood does not get so hot to burn you, but I do find it uncomfortable enough that (until recently) I always grasped the eNano from the bottom inch or so, fingers above and below the cord.

I have two nanos and find that the walnut one gets hotter than the cherry one. Maybe it has something to do with the type of wood?

To help insulate against the heat, I made "Vaping Jacket" for my walnut eNano. I took some thick leather, dyed it brown, laid out a pattern, and stitched it up.

It still gets hot after a while, but not as hot as the wood gets.

Fl133zT.jpg
 

Alegre

Pobre payaso
One of the things I don't like is how hot the eNano gets during prolonged use. Granted, the wood does not get so hot to burn you, but I do find it uncomfortable enough that (until recently) I always grasped the eNano from the bottom inch or so, fingers above and below the cord.

I have two nanos and find that the walnut one gets hotter than the cherry one. Maybe it has something to do with the type of wood?

To help insulate against the heat, I made "Vaping Jacket" for my walnut eNano. I took some thick leather, dyed it brown, laid out a pattern, and stitched it up.

It still gets hot after a while, but not as hot as the wood gets.

Fl133zT.jpg
That's awesome! I need something like that for my walnut nano!

Well done!
 
Top Bottom