Discontinued Supreme Vaporizer

KidFated.

KidFated.

Unknown Member
dapperdopamine said:
I need some help, when I got my supreme v3 the thermometer was still on, it would not turn off, and I let it sit for about 20 minutes because I had some work to do, I came back to find it had died completely and will not turn on, I suspect the battery was dead from being on the whole time during shipping, but that still doesnt solve the issue of it not being able to turn off, I have removed the battery, and will try another later after I get home from work. but as I am currently there I can not get one, Is this a common issue, has anyone else experienced this? I have a decent amount of tools available to fix this issue if it isnt just battery related, does anyone know why It wouldnt turn off though? if someone can shed some light on this it would be greatly appreciated
Click to expand...
The buttons are pretty badly constructed IMO, if they are put in a weird spot when reassembling after a battery swap, it can lead to the buttons acting pretty much useless.

I think a battery swap and a quick repositioning of the buttons will solve your issues, or at least I’m hoping so. We’re all in this together.

Vitolo said:
I used my Supreme V 3 once with a Propane torch
Click to expand...
Shit, that’s all I use, Uncle Vito!
 
Last edited by a moderator:
dapperdopamine

dapperdopamine

Well-Known Member
Stu said:
Yes, that happened to me right before the battery died. A new battery was all I needed to get up and running again.

:peace:
Click to expand...

yeah I replaced the battery and everything was fine, and damn the supreme really rips, I was a little bit hesitant to believe the hype, and was annoyed cause it had been a long day, but those big rips put me right to sleep.
 
dapperdopamine

dapperdopamine

Well-Known Member
damn, I ripped one of the 14mm seals trying to get it on, ordered a new piece after breaking my last one that was 18mm this ones 14, also, anyone ever tried to make glass stems for the supreme, thinking that might be something cool to do, might try to ask a local glass blower and they could just make the end of it 14mm
 
VAPEHUNTER

VAPEHUNTER

Well-Known Member
dapperdopamine said:
.....anyone ever tried to make glass stems for the supreme, thinking that might be something cool to do, might try to ask a local glass blower and they could just make the end of it 14mm
Click to expand...
1st post on this page ...:p Make sure you choose the large straight stems. Check my Sig. if you need help cutting them.
biohacker said:
Large vapo2 stems back in stock fellas! Only took a year? :lol:

https://vapolution.com/index.php?app=ecom&ns=prodshow&ref=VAP2-STRAIGHT-BOWL
Click to expand...
 
Fightingteam

Fightingteam

Well-Known Member
Going to be ordering more of those stems soon. I like to keep them long as the length helps keep as much res from forming inside my Sherlock or bong and I can clean the stems every 10 bowls to add to an eventual claim edibles batch.
 
VAPEHUNTER

VAPEHUNTER

Well-Known Member
Phenix said:
There were glass stems with 14/18mm end made: tough they limited, 4pcs were made.
For normal glass stems: they exist, tough I can’t remever the brand / where to get them
@biohacker any ideas?
Click to expand...
Yup, there were some "beta" stem/gongs available from @PeteSeattle but he seems to have gone MIA.
Read about them here→ http://fuckcombustion.com/threads/supreme-v3-gongs.24427/

0lckEfrl.jpg
 
Phenix

Phenix

Well-Known Member
@VAPEHUNTER

Never tried but I heard cutting glass is easier doing this
Soak a string of cotton in fuel, tighten it around the cut-line, hold the glass with pliers, burn the fuel-soaked cotton and after it burned put the glass stem into cold water.

Is this vivid?
 
dapperdopamine

dapperdopamine

Well-Known Member
wellp I fucked up, pro tip, do not squeeze your supreme bowls with pliers while running them under boiling water, you will fuckin bend the bowl, stupid me forgetting how flexible warm aluminum can be, does anyone know how much ed charges for replacement bowls and seals off the top of their head?
 
dapperdopamine,
highasakite

highasakite

Well-Known Member
dapperdopamine said:
wellp I fucked up, pro tip, do not squeeze your supreme bowls with pliers while running them under boiling water, you will fuckin bend the bowl, stupid me forgetting how flexible warm aluminum can be, does anyone know how much ed charges for replacement bowls and seals off the top of their head?
Click to expand...
In July, I bought a bowl set (bowl, screen, 14mm seal, 18mm seal) for $12 plus $8.20 shipping.
 
highasakite,
  • Like
Reactions: Morty
Morty

Morty

Well-Known Member
Vaped for the 1st time in a minute. Man, what a rush. Almost feel like I have "hyper vision". Everything's so vivid & bright. :o

Did my normal routine. Heat up w/ stem inserted & stop around the temp where the flavor starts turning to the burnt popcorn/roasted nut flavor. It's totally material dependant, but I usually shoot for around 350°F +/- & adjust up & down from there on my taste preferences. Well, today I decided to start w/ a tasty low temp 320°F hit...& got that burnt popcorn/roasted nut flavor. :hmm: My shit isn't super dry or anything. Fairly sticky. So I tried the old heat it up to 400°F w/o the stem in & then insert it in after heating. BINGO! That's the ticket! Phat clouds & good flavor. Man, I'm really fucking hungry. A gyro sounds fire AF. :drool:


Edit: Broke my bong earlier. And that's why we buy China glass. $25. W/ my 14mm j-hook & showerhead ashcatcher, it's a a great little trio. You can use the j-hook dry or hook it up to the ashcatcher for minimal water diffusion. Hook the ashcatcher up to the straight bong & you got a setup that rips fucking hard. I did prefer the airflow on my old 18mm j-hook, but no worries. Take out the downstem, put in a 18/14mm reducer, and boom. Steamrolla! Vito knows. Got all 3 for $53 total.
 
Last edited:
Morty

Morty

Well-Known Member
Been thinking about all the different ways to hit the SV3 (there are MANY). There's a way I don't think has been tried before (?), that I've been wanting to try out.

Using the stock stem & some small Underdog basket screens in lieu of the stock screen, fill up the stem like normal, then cap the top w/ another UD screen, turn the stem over & put in a cotton dab up top, ala @biohacker. Another way to do a Supreme double decker ?

What do you guys think ? @lazylathe Viable ? I would try it myself, but I'm out of 'trates & don't really have enough to rosin.
 
Last edited:
szai

szai

Well-Known Member
Morty said:
Been thinking about all the different ways to hit the SV3 (there are MANY). There's a way I don't think has been tried before (?), that I've been wanting to try out.

Using the stock stem & some small Underdog basket screens in lieu of the stock screen, fill up the stem like normal, then cap the top w/ another UD screen, turn the stem over & put in a cotton dab up top, ala @biohacker. Another way to do a Supreme double decker ?

What do you guys think ? @lazylathe Viable ? I would try it myself, but I'm out of 'trates & don't really have enough to rosin.
Click to expand...

I've done something similar ud and all but only one and just tossed the shatter in with the bud.
 
szai,
szai

szai

Well-Known Member
I've just been using the sv3 with my new 420 magic flight orbiter ma! It's a great match! Unfortunately the stand kind of sucks. I want someone to make me some enclosure that fits in a cupholder made of wood. Or and I'm leaning this way because of the fantasy series I'm currently reading, a weighted leather sack!
 
You must log in or register to reply here.
Top Bottom