New! Yocan STIX

PPN

Volute of Vapor
Well I put in my order, expect a video in a couple weeks guys. I am not testing with pure concentrates or distillates sorry, I am making liquid to try in it.
Hi my friend, very curious about your feedback, design of the Stix is interesting. Do you mean you are going to add terps/liquidizer in your shatter to make it runny or just will test e-liquids?

I thought storage was made of glass... is it possible to carry storage fully loaded , not on the Stiix but for later?
 

Yocantech

Well-Known Member
Manufacturer
Glass storage improves the chance of reuse and allows deeper cleans. Plastic can warp and isn't as easy to clean out entirely. I'd like to see a yocan pen with a shield around the hidden glass tank. Maybe offer silicone sleeves if you get a new glass tank. It'd cover the juices/oils and add that impact durability.
Thank you very much,we'll consider your suggestions. :tup:
 

tennisguru1

EXCELSIOR!
Thank you very much,we'll consider your suggestions. :tup:

You are going to hear this a lot, lol.
Yocan hasn't lowered their standards
to plastic in a long time. maybe Never.
Why change now, stick to Steel, glass &
ceramic, as we out here seemed to have
made their minds up on this tech.
Thanks so much for having this conversations
 

paytonpenn

Level 30 Nature/Healer
You are going to hear this a lot, lol.
Yocan hasn't lowered their standards
to plastic in a long time. maybe Never.
Why change now, stick to Steel, glass &
ceramic, as we out here seemed to have
made their minds up on this tech.
Thanks so much for having this conversations
So I have my STIX now and plastic makes sense. This seems very oriented as a liquid/juice tank not oil/wax (thick liquids) You may have success when the oil gets melted enough to go in the tiny hole where the ceramic heater lies.

I will post pictures or maybe a close up teaser video within a few days. I don't think glass would be possible a metal tank would be interesting.

I like this thing still haven't used but I can see potential in this design and a couple of the features. I wont write out much as its hard to explain versus just showing you but its super small, the plastic liquid container has its own cap to allow travel without oil leaking into the heater. Everything screws together there is no snap on (friction fit) or magnetic anything the plastic is threaded and you'll need to take off the bottom cap on the liquid tank to start vaping and inhaling through the tank.
 

tennisguru1

EXCELSIOR!
So I have my STIX now and plastic makes sense. This seems very oriented as a liquid/juice tank not oil/wax (thick liquids) You may have success when the oil gets melted enough to go in the tiny hole where the ceramic heater lies.

I will post pictures or maybe a close up teaser video within a few days. I don't think glass would be possible a metal tank would be interesting.

I like this thing still haven't used but I can see potential in this design and a couple of the features. I wont write out much as its hard to explain versus just showing you but its super small, the plastic liquid container has its own cap to allow travel without oil leaking into the heater. Everything screws together there is no snap on (friction fit) or magnetic anything the plastic is threaded and you'll need to take off the bottom cap on the liquid tank to start vaping and inhaling through the tank.

HMmmmmm... this leaves even more mystery??? LOL!!!
Can't wait for working hitting Video.
@Yocantech
Hard to believe a company that doesn't operate out
of a garage can't make a simple actual working video.
Really send one to Chris at Indoor Tokers & Danielle
at Dab Spot like 1 month ago.
 

paytonpenn

Level 30 Nature/Healer
Really send one to Chris at Indoor Tokers & Danielle
at Dab Spot like 1 month ago.
I'm not sure what they are doing I asked for a review unit when the thread was announce but they took too long for me and I ended up just purchasing mine on eBay for 14 dollars.

I went through YocanWorld and it was shipped from Illinois to my state in 2 days.

https://www.ebay.com/itm/Yocan-STIX...THENTIC-FREE-SHIPPING-USA-SELLER/173219114286

I ordered 3 (2 SS/1 Black) and they all work and seem to come in legit package.
 

tennisguru1

EXCELSIOR!
Like to try one for #13
Have you smoked any oil out of it yet?
Is it worth it?
Does it hit Big or draw easy?
 
tennisguru1,

tennisguru1

EXCELSIOR!
I'm not sure what they are doing I asked for a review unit when the thread was announce but they took too long for me and I ended up just purchasing mine on eBay for 14 dollars.

I went through YocanWorld and it was shipped from Illinois to my state in 2 days.

https://www.ebay.com/itm/Yocan-STIX...THENTIC-FREE-SHIPPING-USA-SELLER/173219114286

I ordered 3 (2 SS/1 Black) and they all work and seem to come in legit package.

When you mean they all worked, do you mean for E-juice?
Like to know if anyone can hit some C02 oil or BHO oil

I don't do E-juice, but I'd like to help a friend off cigs.
This looks small & simple for that, keep us informed please, TY
 

paytonpenn

Level 30 Nature/Healer
When you mean they all worked, do you mean for E-juice?
Like to know if anyone can hit some C02 oil or BHO oil

I don't do E-juice, but I'd like to help a friend off cigs.
This looks small & simple for that, keep us informed please, TY
I wont have any materials to test until next week. I mean I didn't receive faulty batteries.

I will NOT be testing with C02 oil or BHO oil. I use concentrates and holy terps to make my own thc e-juice.
 

tennisguru1

EXCELSIOR!
I wont have any materials to test until next week. I mean I didn't receive faulty batteries.

I will NOT be testing with C02 oil or BHO oil. I use concentrates and holy terps to make my own thc e-juice.

Thanks for quick reply.
I have friend that actually use WaxL , can I get him one
as it looks like it won't leak out the bottom.

I just ordered a black one & they shipped it 20 mins.
I got some nice Distillate & C02 & BHO that I have been
dabbing/sipping on Yocan donuts thru Pinnacle water tool
We'll see how much oil it drinks, lol.
 
tennisguru1,

tennisguru1

EXCELSIOR!
Screw the base connector off from the oil chamber, then you can fill the oil chamber with your oil. Then attach the oil chamber to the coil by screwing it on. Details like picture below:
FEtFsgFsjpgkhn3ihEPO03UPvYB_KQMYXGJG_c4_C4Q.png



Because the oil chamber is designed with independent storage, the specially designed base connector can keep it leak proof.

So I have my stix pen & I filled it with oil & how long do I wait till
coil gets saturated to hit this?
Love all this limited info , no video, no instructions, lol
I really can't see how this plastic feeder design is going to work
only put in a one forth of my gram in to test.
I'll wait till it drips down to atty, but I'm not very sure about this.
 
tennisguru1,

paytonpenn

Level 30 Nature/Healer
So I have my stix pen & I filled it with oil & how long do I wait till
coil gets saturated to hit this?
Love all this limited info , no video, no instructions, lol
I really can't see how this plastic feeder design is going to work
only put in a one forth of my gram in to test.
I'll wait till it drips down to atty, but I'm not very sure about this.
How thick is your oil?
 
paytonpenn,

tennisguru1

EXCELSIOR!
How thick is your oil?
Medium viscosity Co2 oil organa labs fully activated refined
Flows slowly at room temp
After 1/2 hour can suck battery fires can't draw at all
no clue at what's going on.
From first look at this flow or drip into atty
Seems like it might pure pg , lol
 
tennisguru1,

paytonpenn

Level 30 Nature/Healer
Medium viscosity Co2 oil organa labs fully activated refined
Flows slowly at room temp
After 1/2 hour can suck battery fires can't draw at all
no clue at what's going on.
From first look at this flow or drip into atty
Seems like it might pure pg , lol
Sounds like it wants thin juice rather than thin oil have you tried using a heater to help make the C02 oil thinner.
 

tennisguru1

EXCELSIOR!
Sounds like it wants thin juice rather than thin oil have you tried using a heater to help make the C02 oil thinner.

Not sure how much heat from my hair dryer will do.
I can use on Rove & Ccell carts, glass for a few seconds
with no fear & get thick stuff flowing nice.
I can't even get an air flow path on this.
NO DRAW AT ALL, STUCK.
Can't see no way the oil gets to atty at all.
Hmmmmm Why did Yocan rep come on an
vape THC forum for a thin EJuice pen?
Hope someone has an idea, lol.
I'm laughing along with the joke for now, lol.
 
tennisguru1,

paytonpenn

Level 30 Nature/Healer
Not sure how much heat from my hair dryer will do.
I can use on Rove & Ccell carts, glass for a few seconds
with no fear & get thick stuff flowing nice.
I can't even get an air flow path on this.
NO DRAW AT ALL, STUCK.
Can't see no way the oil gets to atty at all.
Hmmmmm Why did Yocan rep come on an
vape THC forum for a thin EJuice pen?
Hope someone has an idea, lol.
I'm laughing along with the joke for now, lol.
The product belongs here and has no place in a Ecig forum. Its for THC eJuice.. I don't see much appeal if it was just oriented for ejuice for nic users.
 

tennisguru1

EXCELSIOR!
I wont have any materials to test until next week. I mean I didn't receive faulty batteries.

I will NOT be testing with C02 oil or BHO oil. I use concentrates and holy terps to make my own thc e-juice.

I've done that for my buddy & with his WaxL.
I myself don't even use carts at all anymore
and NEVER USE ANY CUT!

I Just preload Shatter & Distillate combo in evic
two mini with Yocan Donut coil when out.
When home the Xvape Vista water tool inc.

This looks like it could not get thru that plastic
screw on piece between the adapter & oil cart.
Maybe it should be left off? only for carry storage?
 
tennisguru1,

tennisguru1

EXCELSIOR!
The product belongs here and has no place in a Ecig forum. Its for THC eJuice.. I don't see much appeal if it was just oriented for ejuice for nic users.

Yes, I don't get it either?
How can anything drip down in that small hole?
So glad only spent $12.99 lol
 
tennisguru1,

paytonpenn

Level 30 Nature/Healer
I've done that for my buddy & with his WaxL.
I myself don't even use carts at all anymore
and NEVER USE ANY CUT!

I Just preload Shatter & Distillate combo in evic
two mini with Yocan Donut coil when out.
When home the Xvape Vista water tool inc.

This looks like it could not get thru that plastic
screw on piece between the adapter & oil cart.
Maybe it should be left off? only for carry storage?
The screw on piece is suppose to come off when you want to use it.
 

tennisguru1

EXCELSIOR!
The screw on piece is suppose to come off when you want to use it.

Kind of figured that was the only way to get the oil thru, lol.
You should be hired to do a real instruction book & video
last month would have been a good time.
Thx for you patience & time & yocan should thank you also
 
tennisguru1,

tennisguru1

EXCELSIOR!
Hi my friend, very curious about your feedback, design of the Stix is interesting. Do you mean you are going to add terps/liquidizer in your shatter to make it runny or just will test e-liquids?

I thought storage was made of glass... is it possible to carry storage fully loaded , not on the Stiix but for later?

OK
I used hair dryer to get co2 oil from syringe frowing.
It actually didn't take much heating at all to get it going.

From what I can tell, yes, you will be able to carry refills
separately from pen.

The little plastic screw plug part that separates the Atty
from the oil capsule itself is the cap of the oil capsule.
I'm testing it on a fairly thick common type co2 oil.
Going to try the diff temps, so far Red is a little weak.
 
tennisguru1,
  • Like
Reactions: PPN

paytonpenn

Level 30 Nature/Healer
Kind of figured that was the only way to get the oil thru, lol.
You should be hired to do a real instruction book & video
last month would have been a good time.
Thx for you patience & time & yocan should thank you also
I just got mine loaded up with some Holy Terps Pure Strawberry and Purple Kush. I have a huge tolerance against concentrates so my testing of 1g:0.4mL isn't very potent but it definitely works and would probably be strong for others.

So I will do a video in a few weeks probably release before 4/20, right now I can say this is good. Teaser video I will try to do today.

Taste is clean, vapor production isn't crazy is okay but for discretion that's fine. The atomizer doesn't fit into any of my eleafs but does work with a couple of my other box mods. I wouldn't suggest using it in those anyway as it needs the low voltage that the battery runs at.

A bigger tank definitely, I will need to attempt refilling again but it seems hard to max it out but maybe I was being too safe.

Red is low temp, green is medium, blue is high.

@PPN you can easily carry the load around not on the stix that is actually what the base connector in the first page picture is.
 

tennisguru1

EXCELSIOR!
I just got mine loaded up with some Holy Terps Pure Strawberry and Purple Kush. I have a huge tolerance against concentrates so my testing of 1g:0.4mL isn't very potent but it definitely works and would probably be strong for others.

So I will do a video in a few weeks probably release before 4/20, right now I can say this is good. Teaser video I will try to do today.

Taste is clean, vapor production isn't crazy is okay but for discretion that's fine. The atomizer doesn't fit into any of my eleafs but does work with a couple of my other box mods. I wouldn't suggest using it in those anyway as it needs the low voltage that the battery runs at.

A bigger tank definitely, I will need to attempt refilling again but it seems hard to max it out but maybe I was being too safe.

Red is low temp, green is medium, blue is high.

@PPN you can easily carry the load around not on the stix that is actually what the base connector in the first page picture is.

That's about where I got, but really don't care for taste
or vape production on lower temps.
High temp (blue) got a tad harsher not better.
Got to move it to my mod for more testing.
What would you suggest as a starting point ?
Around 4 watts 2.3 V & work up from there
in wattage mode to start?
How does it go thru oil in your estimation?
Thx for feedback
 
tennisguru1,

paytonpenn

Level 30 Nature/Healer
So I went through about .5mL of juice within a day, it depends on the user. I'd always start lowest watts, I don't see much reason to go past 7-8 watts that is going to result with bad flavor quick.
 

tennisguru1

EXCELSIOR!
So I went through about .5mL of juice within a day, it depends on the user. I'd always start lowest watts, I don't see much reason to go past 7-8 watts that is going to result with bad flavor quick.

I am at 5.8 in watts mode Lavaboxm m DNA75 getting better vaper production
than on (blue) high setting of pen but much better taste.
Goes thru oil like my ccell also does.
These pens (good ones) seem to me to be designed to hit fast hard .
Example same amount of pretty pure thick maple syrupy say .05
Pen 1 hit gone wham bam
On yocan ceramic donut in TCR mode on evic two mini 2 20 sec draws of dream & 1 harsher clean up hit in watt mode
going to try some 91% Scarlet oilworks Strwnana kong glass Syringe & turn it up in 1/2 watt incrs
 
Top Bottom