• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Cheap High Quality Bubbler

*****WARNING*****
I just bought this water device to pair with my FURY 2....:https://www.dhgate.com/product/mouthpiece-stem-water-bubbler-14mm-with-glass/393988277.html

Device leaked water right down to my FURY 2..Not overfilled,just faulty by the maker.No one is answering ANY mails at all,the CHAT function,same there,no answers..It's only 11US,but still.

Have a good Micro Dose day (MDD);-)
Dude I dont know that seller but it is still the Chinese New Year period in China. The official holiday is over but some factories may be slow to respond for a bit longer.
 

AMiA

Well-Known Member
Dude I dont know that seller but it is still the Chinese New Year period in China. The official holiday is over but some factories may be slow to respond for a bit longer.

Jepp,i live in Asia so i know all about the Chinese New Year..but 2018-01-26...recived 10-02..CNY start 16..We will see if i get any response at all..if so i will post that too..dude.
 

jl420

Well-Known Member
I made the mistake of taking a draw of "clean" air from one of my first Chinese glass pieces freshly removed from the nasty Chinese bubble wrap, just to test handling and lip seal to the mouthpiece.
Never again! :o The air left in that pipe was so stale and toxic (really bad chemical odor and taste) that I coughed for the next 10 minutes. I'm sure it probably took at least a week off my lifespan.
Horrible... not recommended. Just wash the pipes already! :D


No matter what glass I get I always wash with soapy hot water the repeatedly rinse with warm water. (OCD Master) I normally give all China glass a thorough salt/ISO wash first then the soapy warm water wash next. I've noticed that all my China glass after unwrapping it has a weird film smell to it.
 

Likes2vape

Well-Known Member
I’m not sure if it’s the tape or the bubble wrap used but all the bongs I have ordered from China smell like plastic/chemicals when I first get them. :puke:

After giving them a good hot water rinse followed by an iso rinse and another hot water rinse the smell is always gone. :rockon::science:
 

ataxian

PALE BLUE DOT
Dude I dont know that seller but it is still the Chinese New Year period in China. The official holiday is over but some factories may be slow to respond for a bit longer.
U have a lot of glass!
2HFbii0.jpg

This was cheap however it function's well?

@MegaMan2k just get it.
If U like it I'm getting one as well!
 

Baron23

Well-Known Member
Sorry, @Alexis, I like you very much but this is a pretty doubtful opinion. Although it's absolutely OT I can't resist to reply to this interpretation as a reality distorsion of a really derailed sensation here and now.

I appreciate Edwyn as mastermind and producer of this really awesome devices very much but nobody knows why he was pissed off. His behaviour was just choleric w/o any reason.
There were the most constructive critics, nearly his best betatesters, who just adviced him in a friendly way to a little flaw of construction of the new bowls and he's standing like a little child and claims "you are all wrong, everything is working flawless!" and he is leaving the thread in the sulk? One week later he overworked the new bowls regarding the mentioned flaw as suggested w/o any comment or even an excuse for that at least "unprofessional" behaviour. Don't bite the hand that feeds you!
But good to know, if I should acting like an defiant choleric child in the future I'll say it's just cause of my sensitiviness and my passion and everybody will understand that for sure ;)

Alexis, better read the whole incident again :wave:

BTT regarding Vitolos's vid on unboxing the FP bundle have I seen right, that there was a FC 186 with Matrix logo included?

Pretty reckless I would say.
You are absolutely spot on and the record is there for anyone to read.....like perhaps @Alexis?

Out of here but I do believe that @Hogni 's interpretation of events is the accurate one.

Back to Chinese glass.
 

Alexis

Well-Known Member
You are absolutely spot on and the record is there for anyone to read.....like perhaps @Alexis?

Out of here but I do believe that @Hogni 's interpretation of events is the accurate one.

Back to Chinese glass.
I saw it all live Baron. I mean no disrespect to you or anybody personally. You were directly involved and I understand how strong your feelings are on it all, and I can empathize with you from your own perspective.
I am just seeing both sides and not having been involved, more detached and therefore excusing/understanding of human nature.

I am certainly not the only person to have this more open view, I believe there are many, at least some who agree fully anyhow.

Seriously Baron, I say in good spirit. I respect you for your wisdom and maturity plus tolerance of others, and I would never mean to offend or patronize you. We can all have radically different viewpoints based on our positions and emotional state etc.
Have a good evening, and yes, back to Chinese glass!

Got the FC-186 running with Elev8r lately, with Omnivap in FC-UFO, which works very very well with the vapcap. A mix and match scenario that is working quite nicely.
 
Last edited:

cybrguy

Putin is a War Criminal
Have you been in a Chinese Factory building?
Some are cleaner than U might think?
I have not, and it would not surprise me if there are some that are ultra modern and pristine. It would also not surprise me to find some that are unsafe with highly polluted air and generally unsafe working conditions. Or even decent factory conditions that allow cigarette smoking without proper ventilation. China's history of workplace conditions is not a pretty one, but it's definitely improving. Partly, I think, due to globalization.
It is certainly true that one doesn't HAVE to go to China to see bad working conditions. It is harder here than a lot of places to get away with it other than in isolated places but I'm sure that is cold comfort to someone in a sweatshop somewhere in Appalachia.
I saw some pretty nasty sweatshops in the garment district in NYC when I was in the rag business many years ago, but I'm sure that is vastly improved today.
 

ataxian

PALE BLUE DOT
I have not, and it would not surprise me if there are some that are ultra modern and pristine. It would also not surprise me to find some that are unsafe with highly polluted air and generally unsafe working conditions. Or even decent factory conditions that allow cigarette smoking without proper ventilation. China's history of workplace conditions is not a pretty one, but it's definitely improving. Partly, I think, due to globalization.
It is certainly true that one doesn't HAVE to go to China to see bad working conditions. It is harder here than a lot of places to get away with it other than in isolated places but I'm sure that is cold comfort to someone in a sweatshop somewhere in Appalachia.
I saw some pretty nasty sweatshops in the garment district in NYC when I was in the rag business many years ago, but I'm sure that is vastly improved today.
I'm not trying to be a DICK, just my POV!

My IPHONE from APPLE is amazing! (made in CHINA)
MY HP LAP TOP not bad? (made in CHINA)
My NIKE'S very light? (made in CHINA)
My MOD & TANK'S 4 CONCENTRATES! (made in CHINA)

SORRY! (LISTING)
PiRxekb.jpg

$20.00 set-up from CHINA delivered?
CANNABIS grown in CALIFORNIA! (outside)
 

MegaMan2k

Well-Known Member
Not cheap but a very beautifull rig! Habitually I'm more in a simple classic design but this one definitively catch my eyes, a shame I can't afford it:
https://www.t-ehle.de/en/dabbing/oil-rigs/oil-rig-Medusa-with-titanium-nail.html


Does that qualify as china glass :D


I had a blaze piece from dabben.de that was 97 euro, not on the same level as that ehle tho
Only had it for a Month before the joint broke off it, i would say my Dhgate glass is of better quality than that piece was. Inconsistent glass thickness seemed to be the issue.

I no longer see my self spending money in that low/mid range price tag (other than dhgate)

If im gonna get me a more expensive piece at some point i would like it to be handblown by some artist or whatever.

Still a pretty cool ehle rig :-)
 

PPN

Volute of Vapor
I understand you and didn't plan to buy it, just liked the artistic style but it's out of my price range for bubblers, I still buy them using DHgate mainly except the first time, I bought a weedstar bubbler which was great but China made and a bit overpriced (not so much though).

This thread is called "cheap high quality bubbler", doesn't mention if it's made in China or not but I agree this is not cheap at all!
 

MegaMan2k

Well-Known Member
Sure man all things glass welcome if u ask me atleast :D

I was a little suprised by the quality of the dhgate glass, i wasnt paying attention last night and slammed my vortex recycler pretty hard into the sink and i thought for sure that i was gonna crack it, however it seemed to vibrate perfectly throughout the piece, so glass thickness must be on point
 
MegaMan2k,
  • Like
Reactions: ataxian

ataxian

PALE BLUE DOT
I just received this one from CCG.
https://m.dhgate.com/product/ccg-ne...pes-glass-bongs/407153389.html#mstprod-8-null

It is an absolute cracker. Thick glass and the perc hits very smoothly without chug. I got light green accents and it looks great. Best Chinese piece I have tried :2c:
2nZH2V2.jpg

GAS I have real bad?

Espresso (FRENCH), READ (OK I love reading)

The MOUTHPIECE is pretty large for me and I'll reduce the size. (I'll have a smaller mouthpiece made locally)

CANNABIS + GLASS + VAPORIZER + CIVILIZATION = GAS

CANNABIS is wonderful!

CHEAP GLASS is great for me!
 

stjake

Member
Can anyone point me to where I can buy aftermarket glass (adapter?) that would fit the Source Enail XL? Or, are they all standardized sizes (such as the g9 510 nail they sell at DHGate). I would like to be able to use different water filtrations. Pardon my ignorance, but I am just starting out using water.
 
stjake,
  • Like
Reactions: Hogni

MrMonss

Well-Known Member
Can anyone point me to where I can buy aftermarket glass (adapter?) that would fit the Source Enail XL? Or, are they all standardized sizes (such as the g9 510 nail they sell at DHGate). I would like to be able to use different water filtrations. Pardon my ignorance, but I am just starting out using water.

It looks like it is at 19.99 on the official website ..
You can find around 12/15 on dhgate .. The margin is not so great
 
MrMonss,
  • Like
Reactions: ataxian
Top Bottom