ataxian

PALE BLUE DOT
OREGON GLASS BLOWER 4 sure!

Today is THURSDAY?
Hump Day was yesterday!

When I was a YOUNG GUN I wiped out on some HUGE WAVE'S!

Been retired for 7 years so I forgot what day it is?

NANO TIME!
 

Alexis

Well-Known Member
@Alexis - when I bought it in June it was 16 GBP and change (sorry, don't seem to have symbol for GBP) but it also cost me 15 GBP in shipping!!

They must be trying to move them...that's a great deal, IMO.
Well I know they just renovated their whole website. I am supposed to be returning a Blazer Big Buddy torch I bought for the Elev8r a few weeks ago- I used it wrong thinking I could ignite it one handed with just a thumb ckick after locking continuos flame and hold switches on first.

It did work, but soon stopped working this way and when I rang them to explain they said returnnit for replacement, because it isn't supposed to be used that way but that isn't made clear enough in instructions.

It still works how instructed (but don't tell them I knocked it onto the floor too!)
However- since site update, the Big Buddy isn't there anymore. So I guess I just hold onto it now.
Cheers Baron
 
Last edited:

SloJimFizz

Unknown Member
LMAO!!!
Check this out...

Now you get it!!

Oh, I've known the reference.
But Nigels amp knobs all go to 11 to push it over the cliff.
My Nano says 11, but turns only to 10. Nigel would say my Nano only goes to 10, therefore it does not go to 11. :D
Still pretty sweet that it does say 11.


valjZhm.jpg


Fire OG from Cali and Wifi from Oregon have been stupendous. Holy neck, have to acquire some day weed of some sort.
You peeps paying under 3 digits for a zip of that grade are really CIVILIZED, and freaking lucky as hell.

Thanks for the link @Baron23
 

ataxian

PALE BLUE DOT
:rofl:

@lazylathe :cheers:



I must be more stoned than you, because I thought that said you were stoned from french TOAST!

Was gonna say hot damn, I know you have a French wife, but I didn't know you had her in the kitchen frying up medicated toast!
N5VJmLM.jpg

Just had a session with GOD'S GIFT + 6.1234785 NANO = EPIC

@lazylathe I took off the HYDROTUBE.

Different 4 sure.

I like it either way.

This strain is KINE GRAPE FLAVOR anyway!
 

SloJimFizz

Unknown Member
All Nano's go to "11"

Not sure if the current ones still go to 11.
I think he sourced a new controller and the new ones only go to 10. But....I do vape a lot, so I could be imagining shit. :D

About those carbed adaptors, I liked the EU price quite a bit more than the ones on this continent.
Anyone here try THIS ONE?
More my price point and I don't mind the wait. As soon as I forget about it, whatever it is, shows up
 

biohacker

Well-Known Member
Not sure if the current ones still go to 11.
I think he sourced a new controller and the new ones only go to 10. But....I do vape a lot, so I could be imagining shit. :D

I just received a brand new Nano and it has 11 on the dial but it actually only "reaches" 10. The dial looks quality compared to past ones i've had. The dial feels stiffer, and the cord isn't as annoying. My Nano has not fallen over once. Not sure if any of the numbers will fade... I think that was an issue in the past?

Anyone here try THIS ONE?

I have a similar (better quality) one from PlanetVape, and never use it. I prefer the spacing/size of the MegaShot/Claisen adapters. That Y adapter is better suited for hitting two vapes at once IMO, but it works too!
 

pxl_jockey

Just a dude
I wanted to pop by and say I got this Megashot/cloud buddy knock-off from vapefiend. I'd seen it for months at £20, but last week saw that it's now £8! It's not on sale or anything so IME, with that sort of price reduction, they are closing it out.

Shipping might kill this for our North American members but for UK it's free over £12. Not sure for the EU. Needless to say, I got one this week and it's nice quality. I'm excited to put the wisdom of @Baron23 to the test and throw the Nano on for a punch to the face, just as soon as I am able to. I wouldn't have thought the addition of this to a WT would change the results so much but Baron hasn't steered me wrong yet!
 

LazyIdol

Well-Known Member


Thought I would jump in with a few options I have had success with in the past as well.

Carbed 18mm adapter : https://www.dhgate.com/product/18-18mm-glass-adapter-with-14mm-carb-glass/408713325.html

Cloud buddy: https://www.dhgate.com/product/cloud-buddy-y-adapter-with-carb-glass-bong/408712103.html

I just got both of those from Steven, took about 2ish weeks as most of his stuff does for me.

They work really well, I have always used claisens but am loving the side carb on the first link I posted. My friends who are less vape-adept than me really like it too.

Traditional claisen https://www.amazon.com/gp/product/B018924XG2/ref=oh_aui_search_detailpage?ie=UTF8&psc=1


I ordered this off amazon for a friend before finding the previous links. It works fine, but I honestly prefer the other 2 I linked.
 

Summer

Long Island, NY
@LazyIdol, aren't the 2 links you posted the same?

@SloJimFizz

http://www.laboyglass.com/adapter/claisen-adapter/three-way-claisen-adapter.html

https://www.dhgate.com/product/smok...oints/386196877.html#s1-2-1b;searl|3478931398

This one is 18mm, but messaged steven & they said that after the CNY, they are going to produce these in 14mm:

https://www.dhgate.com/product/cloud-buddy-y-adapter-with-carb-glass-bong/408712103.html

I messaged them & the height is about 3.5" & here the pic they sent me for the in between joint length:

csmg_2078344804_00.jpg



I have the last 2 enroute, but I also like the 1st one & the one referenced by @Baron23.
 
Last edited:

SloJimFizz

Unknown Member
Thanks @Summer

I may have found me a winner at TAG!
A little smaller and I kinda dig the carb being 10mm cause it can fit a Vapcap. Just have to eventually get a glass plug for the 14mm hole so it can go back and forth between the Nano and other 14mm vapes in one hole, and then the Vapcap collection in the other. Maybe at the same time perhaps? :science:
Piece is available in both 18mm and 14mm.
 

pxl_jockey

Just a dude
SORRY for my last post, I somehow missed Baron's post. This virus must also contain neuro-inhibitor microbes that are making me stupid because I haven't been partaking. Running out of excuses! I've been enjoying the resurgence of Nano-dabbing and general enthusiasm for the best vape you never hear of.

The one from Stevenlmz I really don't like since there's no reclaim well, it's just straight across the bottom. It just makes it undesirable for me but I guess these things will happen when non-enthusiasts are making the stuff. Maybe the next version that will be fixed?

I also like the typeof carbed adapter Mr. Fizz found, I hadn't seen it before, although I've spent time at the TAG site, I never thought to look for this. TAG also have the glass stoppers you were talking about (in 10, 14 & 18mm) for less than others. I like buying TAG better than the gate, simply for the quality control.
 

Alexis

Well-Known Member
This virus must also contain neuro-inhibitor microbes that are making me stupid because I haven't been partaking
Good observation- I can pracfically guarantee you you have one of the 2 prevalent Coxsackie viruses. Either the A1 or B4 strain.

These are by far the most common viruses permeating society. They are real nasty specimens. They are neurological and always infect the central nervous system as well as numerous other bodlilt areas, such as respiratory tract and intestines.

I have had at least one of these viruses in my lungs and nervous system permenantly since November 2012, and most of the time both of them at the same time.
Not been virus free for a single day for over 5 years. They are so hard to clear fully from my lungs and nervous system, I get rid of every infection sooner or later..

But the big problem with these coxsackies is that I get them both at least once a year, usually 2 or 3 times per winter. So I get the, like 90% down, but by then I get them again.

When they first come on, they reallly mess you up. The first few days I get stiffness and tension, almost a musucular paralysis. Also the deepest depression. And sure, they mess your mind and brain up, making us dumb and slow.

Just hang in there man. I hope my pm has something useful for you, take your time to consider it anyway hope it can help.

Right now you need perspective and focus. Just look ahead to the clearer meadow, visualise positive, happy, relieved. It will come so will do you world of good to let your mind drift and dream to there.

That's all. Sorry "Nanoers", you are a terrific bunch. This is another thread that makes me wish I had a Nano/license to participate.

But I can use excuses to drop in like helping out my good friends in tough times, and @biohacker is also now puttong on a show to draw me here more frequently with the tease of Canadian Cannabis Utopia!
 

SloJimFizz

Unknown Member
Tnx @pxl_jockey
Placed the order this morning for the adaptor. Now I won't have to worry about the gong magically gripping to the heater core when I lift the Nano. Pull the cute little glass stopper. :whoa:
Saw the other sized stoppers, but have plenty of VC Vongage that rides the 14mm. Will try it also with an M or Ti VC in the 10mm hole, just to check it out. For research, of course.:sherlock:
 

UnevenPizza

I dream of Pizza
Oops, somehow, again, I didn't get notifications that y'all had moved on without me! :rofl:

I guess my browser somehow froze the site, I checked my alerts..but nothing new. Today I wanted to post my previous message, thought it was kind of weird that it's so quiet, but maybe there's some holiday I don't know about? So I post, and boom suddenly there's 3 pages of quality!

Just had the best DAB of my life! MAX temp, 0.03g rosin, and I still can't get the flavour off my smacker! Still trying to figure out how to prevent waste on anything larger than 0.05g. Too much cotton or hemp fiber wick and airflow is negatively affected. Also getting browning of cotton that isn't abv but "scorching".



CRjwOjY.jpg


:rofl::lmao::tup:


Hell yeah! Convection dabs are the Oil Well that get me through the desert days.

That flyer Is Hliarious @ACE OF VAPE ;)

http://www.planetvape.ca/megashot-glass-double-bowl-offset-adapter.html

Just crushed 0.05g of Hindu Kush live resin! The Nano is concentrate extraction beast!

And it handles traditional hashes with ease! :rockon:

Keep on shabbin' in the free world! Ooohyeah!

o4u5mBb.jpg

CALIFORNIA = NANO COUNTRY
sDQ01pu.jpg

Checking FLAVOR = LAB WORK TESTING GUAVA (NEW) CANNABIS is SAFER than MILK!
YxtJ4Lu.jpg

Testing "GOD'S GIFT" + NANO @ 6.23475 + LOT'S of WATER = CIVILIZED

GUAVA = VERY MEDICATING/LIKE DA FRUIT loose grow
GOD'S GIFT = SOARING/FLAVOR tight grow

Both really great quality just different

GUAVA night
GOD'S GIFT day 4 me

@CarolKing R price dropping where U R?

I take off the top HYDROTUBE off for other vaporizer's.

The NANO is strong is all?
It easy to use and it is perfect 4 my need's.

I have less diffusion normally.

The NANO can handle?

Hell yes the nano fills any glass vessle with amazing vapor. I need no other. Want however...is..


I love my Enano. With a .05 g load in a stem, its nice, polite, gentle medication delivery machine.

With a carb'd adapter on a WP, it hits like a hammer.

Simple and elegant and can be left on all day (or in my case all night). Also, nice hand warmer in the winter LOL

JfjmSBA.jpg


Wow, civilized! for sure!


Nice.
I now want one of those carbed adaptors. Is that common in decent smoke shops, or better luck on-line? All 14mm if someone has a link.

I saw @biohacker 's video while it was up and it inspired me to finally crank mine up to 11. :rockon:
I was a bit disappoint when the dial stopped turning at 10. Figured I would have known that before now, but no. But 10 still kicked ass.
The S&B mesh has a bit of retention going on in my concentrate stem. A potpourri of different strains from using fish flake food sized pieces and then only using 7.5 heat. Max heat kinda loosened things up a tad, my head mainly. :whoa:

koxzXhD.jpg

oooooh wow that's some nice honey you got there!





I was wondering, do you know if there's a version of that without the whole L-Shaped side arm? Could they just "saw" it off with a diamond cutter or something like that?
I would like that for flower hits, as a carb, but also as a hole where I could insert a dabber with some wax on it, so I could just have a convection dab without needing any cotton or other pad/substrate.

I guess some concentrate might drip into the bubbler, so maybe some kind of bend or so could catch anything that drips off.

I hope that makes sense.
I've been partaking in a special tasting, today was Silver moon, also some "critical hash", and I can't remember the third...it eludes me.
 

Baron23

Well-Known Member
I was wondering, do you know if there's a version of that without the whole L-Shaped side arm? Could they just "saw" it off with a diamond cutter or something like that?

Oregon Glass Blower will do custom jobs, I believe.....and since its just simple mod to an existing design, I don't see any reason he wouldn't.

Might want to give him a call.
 

SloJimFizz

Unknown Member
I was wondering, do you know if there's a version of that without the whole L-Shaped side arm? Could they just "saw" it off with a diamond cutter or something like that?
I would like that for flower hits, as a carb, but also as a hole where I could insert a dabber with some wax on it, so I could just have a convection dab without needing any cotton or other pad/substrate.

I guess some concentrate might drip into the bubbler, so maybe some kind of bend or so could catch anything that drips off.

I hope that makes sense.

Hmm, sounds about what I ordered this morning from TAG.
Except they put a little 10mm stem where they cut off the L. You could put a glass nail or a drop down of some sort I'm guessing.

Link in my self quote and pic below that.

I may have found me a winner at TAG!
Piece is available in both 18mm and 14mm.

ciqNfot.jpg
 
Top Bottom