• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

DDave Mod, New DDave Mini Mod & Kit for Arizer EQ/VTower Vapes

DDave

Vape Wizard
Accessory Maker
Thanks, wasn't quite sure if I was just looking at the right ones or not.

Trying to hold off even using my EQ until the parts arrive, looking forward to it :D
No prob... if questions never hesitate to tag me in a post, or PM, or email ddavemod@gmail.com. :cheers: (This emoji really needs to be two people sharing a vape!!!)

Should have kits packed by this evening and USPS will pick up from me in the morning. (They've already picked up for today).
 

DDave

Vape Wizard
Accessory Maker
I know I said I love you guys (FC'ers, Ents, Vapers, etc) just last night, then I get this message tied to an order..... Seriously LOVE YOU GUYS! :love:

Cv5gRoP.png
 

DDave

Vape Wizard
Accessory Maker
Friends, I've been spouting off about a new glass maker and quality pieces the likes of which I've never before seen... Since I've caught up on orders, took some time out to take few pics.... These are the new adapters for the EQ mod kits. One of the greatest improvements is in the consistency of those center rings to install 1" screens with ease. Screens fit so much better. (These are nothing like the glass I've sampled from dhgate sellers.)

PN0klBr.jpg

gjDT2YV.jpg

:rockon:
 

DDave

Vape Wizard
Accessory Maker
Those Bees wax beads, can they be used on the male glass joint that is around the EQ's oven?

My DDave mod got stuck to it earlier & it was hell to pry off.
Absolutely, but in moderation. You're looking for an extremely thin layer. Don't have the heater too hot, or the beeswax will immediately liquefy.

From cold, I start up the EQ and hold my hand over the top. When I feel it start getting warm, I take a tweezers and a bead, then gently coat the ground glass part of the heater cover.
Works a charm!
 

Coal Cracker

Well-Known Member
Just ordered my 1st desk top vaporizer, in the Extreme Q, and the complete Ddave mod for it. Im coming off using only portables; solo OG, solo2& air 1.5. Any tips or links to usage would be appreciated. I usually vape between the tempertures of 393-413F. Should I use the same temps on the Q to achive the same effects?
 

Laantje

Well-Known Member
Just ordered my 1st desk top vaporizer, in the Extreme Q, and the complete Ddave mod for it. Im coming off using only portables; solo OG, solo2& air 1.5. Any tips or links to usage would be appreciated. I usually vape between the tempertures of 393-413F. Should I use the same temps on the Q to achive the same effects?
I suggest getting a water bubbler with it. I use my ExtremeQ+Ddave through my D020-D bubbler which is (IMO) the best way to get high and it really hits me harder than anything else. I use it at 220-225 degrees celsius. After every 5 hits I stir a bit then continue, it works so good.

In my experience, the correct degrees for the best results can differ from other vapes. You should experiment with the vape and use whatever temp fits u best.
 

DDave

Vape Wizard
Accessory Maker
Just ordered my 1st desk top vaporizer, in the Extreme Q, and the complete Ddave mod for it. Im coming off using only portables; solo OG, solo2& air 1.5. Any tips or links to usage would be appreciated. I usually vape between the tempertures of 393-413F. Should I use the same temps on the Q to achive the same effects?
@Coal Cracker , Welcome to the EQ family!
#1 Tip: preheat 10 minutes with empty cyclone bowl or DDave Adapter of choice on the EQ, regardless of temperature displayed on the device. Allowing the heater cover and adapter come fully up to temp really makes a difference.
#2 Tip: @Laantje has some good advice there as well. The kit you will receive has both 14mm & 18mm Male water tool adapters included. Paired with a water pipe and mods, the EQ is a smooth hitting beast!

I suggest getting a water bubbler with it. I use my ExtremeQ+Ddave through my D020-D bubbler which is (IMO) the best way to get high and it really hits me harder than anything else. I use it at 220-225 degrees celsius. After every 5 hits I stir a bit then continue, it works so good.

In my experience, the correct degrees for the best results can differ from other vapes. You should experiment with the vape and use whatever temp fits u best.
Great advice! :nod:
 

dynospec

Well-Known Member
Arizer makes awesome stuff, I really like my solo2 and EQ! My DaBuddha that I was given just never quite worked properly for me, but if I were to clean its parts and give it another shot now I may feel differently but Im still sure Id prefer the EQ.

I think my V2.5 kit cleared customs, so hopefully Ill get it in the next few days Im so excited to try it. Just found this thread and read through it, definitely going to have to get more DDave mods in the future I think. I spent days trying to decide what to order before landing on the 2.5 kit after DDave answered all my questions.

Will update the post with review as soon as I get it!
 

Coal Cracker

Well-Known Member
I got my extreme Q on wednesday & experimented with it & it was ok. Thursday my DDave full mod kit came in & made My Q great! I've experimented through the weekend with different methods...whip,bags& bubbler, and they were all great. Coming from portables, your mod for this machine took my vaping experience to a different level, thank you! At the end of the month I will be 1 year combustion free. And I dont see me ever turning back.
 

DDave

Vape Wizard
Accessory Maker
...made My Q great! I've experimented through the weekend with different methods...whip,bags& bubbler, and they were all great. Coming from portables, your mod for this machine took my vaping experience to a different level, thank you!
@Coal Cracker Glad to hear you're liking the changes the mods bring to your vaping sessions! Makes my day to hear another in the EQ Family loving their vaporizer!

At the end of the month I will be 1 year combustion free. And I dont see me ever turning back.
An anniversary definitely worth celebrating!!! :rockon:
 

dynospec

Well-Known Member
So I got my DDave minimod kit V2.5 today, and I am very pleased with it! Ive only used it once so far, but I am very happy with it. Definitely get a nice extraction, the ABV comes out nice and evenly browned. In "smooth draw mode" (which is how I have used it so far) I got 3-4 nice thick and very flavorful hits before the load was spent. I loaded about .1 - .2 probably about .15g after a 10-15 min heatup of the EQ and the glass.

More experimentation to be done yet, but very pleased with my purchase! Im definitely going to be ordering more from @DDave in the future!
 

DDave

Vape Wizard
Accessory Maker
Received my V3 kit, thanks @DDave. Is it ok to clean the whip with iso alcohol?
Absolutely, just don't soak for extended periods of time (no overnight soaks).
Half full of ISO and a good swish/shake, after getting the majority of the gunk out with the rolling pin method, works a charm!

I clean all my silicone tubing with iso and only had one cheap China piece go bad. But then I might fall over dead any second now.
what happened to the chinese made silicone tubing? Did it turn spongy and seem to absorb the ISO?
 

howie105

Well-Known Member
what happened to the chinese made silicone tubing? Did it turn spongy and seem to absorb the ISO?

It was sticky and smelly out of the box and cleaning it in ISO made it too slick and it made the ISO smell bad, so I bailed.....Just dug a length out of the parts box still smells, like a year later.
 

Gojo99

New Member
Hi all, extreme noob here. Found out this wonderful medicine helps tremendously with migraines so I bought a EQ +DDave kit about a year ago. The problem is I just don't get good hits with the EQ. My glass pipe is best, followed by my handheld vape, and I honestly don't use my EQ anymore.
I've followed the advice here but just can't seem to get good consistent hits.
Here's my procedure:
1. Warm up the EQ for about 10 minutes (with the DDave adapter)- I've tried multiple temps but hotter tends to work best.
2. Load a good pinch (about the same I use with my water pipe)
3. Wait about 5 minutes and take a pull, I only use the whip.

I get about 4 or 5 good pulls then pretty much nothing. I stir and it get's a bit better but not much. I use the same amount in my water pipe and it just hits much harder.

What am I doing wrong? Any advice is appreciated!

-Gojo-
 
Gojo99,
  • Like
Reactions: DDave

DDave

Vape Wizard
Accessory Maker
Hi all, extreme noob here. Found out this wonderful medicine helps tremendously with migraines so I bought a EQ +DDave kit about a year ago. The problem is I just don't get good hits with the EQ. My glass pipe is best, followed by my handheld vape, and I honestly don't use my EQ anymore.
I've followed the advice here but just can't seem to get good consistent hits.
Here's my procedure:
1. Warm up the EQ for about 10 minutes (with the DDave adapter)- I've tried multiple temps but hotter tends to work best.
2. Load a good pinch (about the same I use with my water pipe)
3. Wait about 5 minutes and take a pull, I only use the whip.

I get about 4 or 5 good pulls then pretty much nothing. I stir and it get's a bit better but not much. I use the same amount in my water pipe and it just hits much harder.

What am I doing wrong? Any advice is appreciated!

-Gojo-
Greetings @Gojo

Let's start with the basics:
* What temperature are you setting the EQ to?

* What handheld vaporizer do you have?

* What color is the ABV when you're done vaping with the EQ? The other vaporizer, what color is the ABV from that vaporizer compared to the EQ?

* Which kit did you get?

Answers to those will give us a good place to start working on this....
 

Jtrain252

New Member
Just opened it 30 min ago. Can't wait when I get home from lunch to try a dose and see if I can talk to ducks...the pills are good I'm the fridge right
 
Jtrain252,
  • Like
Reactions: DDave

DDave

Vape Wizard
Accessory Maker
Just opened it 30 min ago. Can't wait when I get home from lunch to try a dose and see if I can talk to ducks...the pills are good I'm the fridge right
Haha @Jtrain252, let me know what they say. I'm curious if they say the same things that geese do? :Rockon:

It's definitely okay to store the caps in the fridge, but not necessary.

Enjoy friend!
 
DDave,

Jtrain252

New Member
Haha @Jtrain252, let me know what they say. I'm curious if they say the same things that geese do? :Rockon:

It's definitely okay to store the caps in the fridge, but not necessary.

Enjoy friend!


Ok so I used your bowl loaded 0.4grams into it and placed the glass stopper over the top.
Baked at 200c for 1 hour and let it cool down for 30min.

I filled each cap with 0.065g of herb and enough oil to make dark.
I ate one about an hour ago and i feel a little funny but not stonnned. We will see what hour two has in store. I can feel it a little in my head. will say in love the new bowl. The funnel makes itnsuper easy.

I don't need everything else in your kit but I'm thinking for balloons and whip I may try and buy your glass screen and straight pipe


I did some measuring if you pack the pill u can get 0.15 grams into the one side
Maybe I need more then 0.065 grams I was trying to get by with the minimum. Maybe next 4 I'll bump up to 0.075
 
Jtrain252,
  • Like
Reactions: DDave

DDave

Vape Wizard
Accessory Maker
Ok so I used your bowl loaded 0.4grams into it and placed the glass stopper over the top.
Baked at 200c for 1 hour and let it cool down for 30min.

I filled each cap with 0.065g of herb and enough oil to make dark.
I ate one about an hour ago and i feel a little funny but not stonnned. We will see what hour two has in store. I can feel it a little in my head. will say in love the new bowl. The funnel makes itnsuper easy.

I don't need everything else in your kit but I'm thinking for balloons and whip I may try and buy your glass screen and straight pipe


I did some measuring if you pack the pill u can get 0.15 grams into the one side
Maybe I need more then 0.065 grams I was trying to get by with the minimum. Maybe next 4 I'll bump up to 0.075
Sounds good so far.

Forgive me as I'm sure you told me this before but what do you normally Vape as far as quantity of herb? That's the quantity that you want to start out with with this kit, even if it means having two caps instead of one.
 
DDave,
Top Bottom