Ricardo

Well-Known Member
Is this a “what’s wrong in this pic” thing because I’ve spent too much time looking and I don’t see it. :hmm::myday:
All good now :tup:

Edit: Are the other three bowing to the mighty Vong?
Pretty much, for now.... although I've experimented with the others + fat mouthpiece = perfect vapor from all sources :D. I can't leave my rig in place permanently but it's still less than 5 minutes to set up, load, vape and stash the lot! I'll still be hittin' the others native, especially when I get the Ti body for the Omni ... but for now I'm loving my mini-bong experience :cool:
EDIT: Sorry for double post :\
 
Last edited by a moderator:

Boden

Aspie polymath
Pretty much, for now.... although I've experimented with the others + fat mouthpiece = perfect vapor from all sources :D. I can't leave my rig in place permanently but it's still less than 5 minutes to set up, load, vape and stash the lot! I'll still be hittin' the others native, especially when I get the Ti body for the Omni ... but for now I'm loving my mini-bong experience :cool:
EDIT: Sorry for double post :\
I agree that the DinaVap makes a great vapor source for a rig. Seems much easier to draw through with a body of air between me and the Tip/cap. The air spring effect is cool to watch.
 

stark1

Lonesome Planet
Is this a “what’s wrong in this pic” thing because I’ve spent too much time looking and I don’t see it. :hmm::myday:

Edit: Are the other three bowing to the mighty Vong?


Sure you do, @Boden. “Form v Function”. :science: (Ricardo called it :tup:)


PS you have constructed some purty pragmatic pieces, bet you have an eye for integrating
your artistic eye into your creations, beauty <=> eye candy.
 
Last edited:

Mr.Sifter

Well-Known Member
3jfVvAl.jpg

what is this dynastash wood ?
looks really nice
 

beyond6strings

Just another traveller in the Cannaverse
This week has shown me the wonders of my vapcaps through my WP both Anhydrous & with water/ice. I've got an Omni Cocobolo, and the M. I love the Omni for the Ti-tip's moveable screen. But I've found that for all my uses keeping the carb wide open on the Omni, as it is on the M, and working the carb gives me the results I'm looking for whether I'm using it direct or through WP.

I'm a musician, I guess I like the flute-like aspect of working the carb.

It's not a video, but here's a little musical something for your Sunday pleasure performed on baritone guitar.

https://soundcloud.com/bonfieldk-1/another-morning
 

IntoTheVoid

Pride Goeth Before A Fall
I put my Ti Omni body next to my M body yesterday. I noticed something. The carb hole on the M is about half the size of the Ti Omni body. And since I generally have the air adjustment on my Omni set about 1/3rd closed, it should be pretty equal to the M wide open.

So without being scientific, I just did a draw test a few times and I find the resistance to be about equal between the two, with the Omni set 1/3 closed and the M wideo open. Of course the tip resistance helps with this too. Also being that SS holds heat longer, I think this kinda affirmed my use of the M without touching the carb. Stoner science!

Since we are posting music, here is one of mine. I wrote and play guitar.
https://www.reverbnation.com/wolfborne/song/23934068-let-it-rain
 

phattpiggie

Well-Known Member
Accessory Maker
All the info to get on my next round of orders is in my last few posts
Phattpiggies Wood Shed

@stardustsailor and @Winegums did you hear George on his live Q&A, we nearly got a mention:)

I gummed up my cap with some concentrate today and whilst the cool down clicks were very audible the hot clicks we very faint.

To clean it I put a few drops of Iso in the cap and shook it a few times to dissolve the goop.

Did this a couple of times then dried it out with a Q tip and held it in a pair of pliers and torched it to check for clicks.

Normal service was resumed.

I would only recommend this method to those who feel confident and competent about it, Iso burns with a barely visible very hot flame.
The last thing anyone wants is for someone to get hurt or worse, please be very careful
 

IntoTheVoid

Pride Goeth Before A Fall
All the info to get on my next round of orders is in my last few posts
Phattpiggies Wood Shed

@stardustsailor and @Winegums did you hear George on his live Q&A, we nearly got a mention:)

I gummed up my cap with some concentrate today and whilst the cool down clicks were very audible the hot clicks we very faint.

To clean it I put a few drops of Iso in the cap and shook it a few times to dissolve the goop.

Did this a couple of times then dried it out with a Q tip and held it in a pair of pliers and torched it to check for clicks.

Normal service was resumed.

I would only recommend this method to those who feel confident and competent about it, Iso burns with a barely visible very hot flame.
The last thing anyone wants is for someone to get hurt or worse, please be very careful
I agree, I too used iso to clean my tip after traveling with my Vap and only having a Bic lighter to use for 2 weeks. Had to get all the soot and nastiness off of and out of it.

I filled the tip with ISO. Let it sit for half an hour. Then scrubbed the outside with a toothbrush and the inside with a Q-Tip. Ran it under hot water for a minute and then shook it out. I dried the inside best I could with a dry q-tip, then put it on my Vap tip and did 3 heat up/cool down cycles. No issues.
 

Tstat

Dead Foot Designs
Accessory Maker
I just want to publicly thank @mephisto for the Vapcap M! I can't believe how well it works. If I go down to "the room" and my EVO has gone cold, I fire up the Vapcap and get WRECKED, lol. What's a a good glass piece to pair it with? 10mm I guess... I just ordered a torch lighter, too.
So, yea, I'm impressed!
 

Mr.Sifter

Well-Known Member
What's a a good glass piece to pair it with? 10mm I guess...

second this

you could get a 14mm to 10mm female glass joint adapter from dhgate.
the mouthpieces, and the stems, and the M will fit a 10mm glass jpint with a nice fit.
some say its better than the nonavong.

But i am too looking for a nice little bubbler with 10mm native.
 

Mr.Sifter

Well-Known Member
so true @Hogni

I wish the "M" did not have the dynavap logo on its body.
would look so much sleeker.

I do not like logo brandings.
I think its more for people to show what they ot or bought.
An item of quality does not need a branding.
it speaks for itself.
 
Last edited:

Boden

Aspie polymath
A very creative take on this one . Nice work:tup:

Very nice, Bud! :clap:

Bet you will consider rounding the edges, for ergonomics....

Burn in your maker’s mark/logo, and you should have some eager clients. :tup:

I agree it’s not bad for a prototype. I have two small changes in mind for this one.

Next one will be a variation on the same theme. Slim line version, if you will.

Better not I HATE visible logos. They nearly always damage a nice appearance of a piece. But whyever a lot of people seem to need right that.

Agreed, no logos.
 

stark1

Lonesome Planet
You mean “integrated into the design”? Adding, rather than uglyfying....:freak:

That to me is artistic, but then I am no Warhol. :mmmm:

Plain. Or fancy. Whatever pleases the artist. :spliff: & his clientele.

An example of a simple and elegant design

JhoQvji.jpg



33egKEE.jpg
 
Last edited:
Top Bottom