Boundless Tera

I think what somebody arrived at was the fact that the herb is in contact with the aluminium here and it's not on a Volcano.
But that doesn't account for why SB aluminium capsules are widely accepted.
The only thing saving the capsules I could think of, is the fact that someone who is worried could throw them away when they believe they might begin oxidizing, and replace with new cheaply?
Somewhere in between tossing them after one use, and keeping the same 8 for years (like me, oops)!



From what I remember, every pod or capsule made from stainless was uncertain to impress all users, until SB came out with aluminium which was a roaring success.
I thought some of this was how quickly the thin aluminium heated up, so it stole less energy and was barely noticeable to users.
Also in the Volcano, the clunkier reduced chamber with extra added stainless seemed to steal some energy, and on full setting it often gave results which looked about 15 degrees below full setting.

So in my mind, I didn't have a gigantic problem with an anodized aluminium bowl.
And my first worry when everyone demanded stainless, is that it might not work as well as first intended, or may steal more heat and take that heat where we didn't really want it to go.

I suppose the fact it's just the walls might make it unimportant,
but I now wonder if the stainless would just be a little slower at spreading the heat evenly.
I'm sure it'll work fine and I'll never wish they left it aluminium!



With vapes, compact and pocketable can also mean harsh, and hot in the hand,
and this was mentioned in the Argo thread by some users already.

I do have a slight fear about this Tera that the mouthpiece isn't going to cool or smooth things out enough being so short on a full convection device.

I even actually heard the opposite. The vapor quality is exactly the same as the Air II. I heard it can get warm but that’s if your doing session after session. Won’t get mine until tomorrow so we’ll see
 

KeroZen

Chronic vapaholic
Yes that's a good question. But if I recall correctly you are amongst the ones who like the metal ring in the CFV right? Wasn't it already aluminium by the way?

I imagine it still has some effect, at least once it gets burning hot and hotter than the load material (prior to that it can only rob from the hot air stream, as the gradient can only go one way from hot to cold)
 
KeroZen,
  • Like
Reactions: b0

b0

Cloudy...
I ended using an EQ dome screen instead of any rings. I tried the aluminium ring for a couple weeks but to be honest the improvement wasn't that good and flavor was compromised. Glass is my favorite of the original ones but just an EQ screen without ring is even better IME.
 
b0,
  • Like
Reactions: KeroZen

KeroZen

Chronic vapaholic
But did you notice any real increase in conduction? Do you think this is why you felt the taste was compromised?

Would be a shame if the Tera has a worst taste than the CFV/SwiftPro due to that...
 
KeroZen,
  • Like
Reactions: b0

b0

Cloudy...
But did you notice any real increase in conduction? Do you think this is why you felt the taste was compromised?

Would be a shame if the Tera has a worst taste than the CFV/SwiftPro due to that...

I guess it was some conduction going on, the flavor doesn't last the same. But we don't know how will work in the Tera, I hope it to have a similar flavor profile/control of temperature, but being able to cash up a load faster if wanted. That would be perfect :)

A man can dream right?
 
b0,
  • Like
Reactions: KeroZen

Razor

Well-Known Member
SS is known to hold its heat so I'm willing to bet there will be quite a bit of conduction. I wish they would've made the bowl smaller with interchangeable rings. Maybe make it cave in for better reload without the outside rim and keep the changeable batteries. Or maybe the ability to adjust the bowl size based on the size of the wooden insert. That would've been pretty badass.
 
Razor,
  • Like
Reactions: KeroZen

KeroZen

Chronic vapaholic
Right, but I find that the v1 is already not too dependent on bowl size or packing. It works well with little or full, tamped or not, and I find extraction quite even compared to most other convection vapes I have. For instance I never stir as the extra yield is minimal at best. That contrasts to other convection vapes were stirring is almost mandatory.

I never used the wooden rings by the way. Not a fan of the extra added flavor. The quartz one is all I use and it's super easy to clean.
 

Razor

Well-Known Member
I love the rings. I use essential oil drops on them while I'm vaping to get added benefits of chamomile and stuff. I'm surprised its not a main selling point of the unit.

I'm going to assume as well that it's going to be a little more like the other units currently out with stainless steel bowls and convection heating. I enjoy those units as well as I can put a sliver in it and get one good little cloud to take off nerves. Micro dosing on the cfv has always been an issue to me. I do however love using the normal size amount or less. Just not the size I can get in SS bowl units.
 
Last edited:
Razor,
  • Like
Reactions: KeroZen

KeroZen

Chronic vapaholic
Ah good points. Your oil drops usage is not something we hear from very often, but nonetheless a very valid use case for the rings.

It's possible also that your micro doses are even smaller than what I consider mines to be. It's clear that at some point if you don't cover the bottom screen fully, performance starts to drop as air happily bypasses the plant bits.
 
KeroZen,
  • Like
Reactions: Razor

notoriousLrg

sTrange cLouds
Hopefully the Boundless team will startup their live stream tomorrow to provide status on ship date, and hopefully the lack of detailed communication on the delay is not related to any major obstacles....
 

SpudBob

Well-Known Member
I heard from Eric last week and he told me, at that time, that they would have a 1/17 lifestream. He also told me some other things re: the Tera but I will leave those details up to Boundless to share with us.
 
SpudBob,

jerseydvd

Well-Known Member
I heard from Eric last week and he told me, at that time, that they would have a 1/17 lifestream. He also told me some other things re: the Tera but I will leave those details up to Boundless to share with us.
Is there even a stream tonight?
Doesn’t appear to be one set.
 
jerseydvd,

b0

Cloudy...
No new info or revaluations.:popcorn:

At this point, I will expect them for March/April to be honest. Chinese new year is around the corner...

No issues for me as I'm waiting for the upgrade program to be available, but if I did pre order I wouldn't mind either. As u always say, I will rather wait a couple more months and have an improved product that something unfinished that doesn't work properly.
 

jerseydvd

Well-Known Member
E-mail last week said first units should ship by end of the month... We'll see. I'd love it in my hands, but I'm in no rush.
 
jerseydvd,

SpudBob

Well-Known Member
Don't know how relevant this is and don't want to speculate too much but their Facebook page "seems" to indicate they may have received the first batch and "may" be processing pre-orders. The wording is not clear so go there and read it for yourself. I did receive an email from Eric early last week and was hoping they would live stream to bring us up to date. Suffice it to say that Smiss has promised the first units before the Chinese New Year on Feb 15th. Take it for what its worth. The boys are doing the best they can. The change in bowl from Alu to S.S. steel is what pushed things back.Without the change, I believe, we would already have the Tera! They didn't, even, get the final production model, in S.S. till the middle of December. Thats when they decided to go the direction that the consensus of their customer base was wanting with Stainless instead of Aluminum.
 
Last edited:

Jack_72

Well-Known Member
I am super excited about this vape but also little concerned that there are no further news on it, I thought it should be released this month.

Besides in such a late state of production I can hardly imagine that the developers just were not sure on which material they should use. To me this all looks like they are having serious problems with the design and functionality...
 
Jack_72,

Likes2vape

Well-Known Member
I am super excited about this vape but also little concerned that there are no further news on it, I thought it should be released this month.

Besides in such a late state of production I can hardly imagine that the developers just were not sure on which material they should use. To me this all looks like they are having serious problems with the design and functionality...
Naw I would be super surprised if there were problems with the design/functionality of the Tera especially with the useage they have shown in the live streams. To me it seems it is more of a manufacturing/shipping/customs delay.
 

Justpassedu

Well-Known Member
If this vape performs similar to a mighty only with the swap-able batteries it should be a very big hit & what i am really hoping for . In the quick usage video i had seen it seemed to perform well but i couldn't really gauge to well as i did not see much. Hoping to hop on the bandwagon when it's out but i did not preorder.
 
Justpassedu,
  • Like
Reactions: Jack_72

Razor

Well-Known Member
The mighty had a ceramic chamber yes? I wouldn't expect it to perform the same largely since it doesn't use the same materials. That's not to say it wont give vapor on par with the Mighty. SS is a very good material to use for a chamber. Similar vapes with SS chambers give amazing results. You're able to micro dose with them very well, they're easy to clean for the most part and makes it easier on the heater to keep temp.

It shouldn't disappoint.
 
Top Bottom