Multi-brand HEALTHY RIPS FURY

DelaSheck

Well-Known Member
Hi @almost there, Great to hear you are enjoying your FURY 2!
Here is the latest on the FURY 2:
  • We have a new WPA available on our website that has a chamber capacity of .1g to .12g. Our original WPA has a chamber capacity of .065g to .08g.
  • We have designed a glass mouthpiece stem that is in production now and will be available within two to three weeks that will have a chamber capacity of .1g to .12g. This will insert into the chamber exactly like the WPA.
  • We are designing stainless steel 'dosing' screens that should be available within three to four weeks.
  • We are replacing the oil & wax cup with stainless steel oil & wax pads - these should be available within three to four weeks.
We are concentrating most of our efforts on the development of our new FIERCE vaporizer that will be available towards the end of April. We received the initial prototype (non-working) a few weeks ago and we gave it a couple of aesthetic tweaks. We will be receiving the first working prototypes within the next two to three weeks and we will share some technical information, pictures and videos at that time.

Happy Holidays!
Healthy Rips Team
https://www.healthyrips.com

Can you give any details at all about the FIERCE? On-Demand or Session? Convection or Conduction?
 

StonerSloth

cui bono?
Hi @almost there, Great to hear you are enjoying your FURY 2!
Here is the latest on the FURY 2:
  • We have a new WPA available on our website that has a chamber capacity of .1g to .12g. Our original WPA has a chamber capacity of .065g to .08g.
  • We have designed a glass mouthpiece stem that is in production now and will be available within two to three weeks that will have a chamber capacity of .1g to .12g. This will insert into the chamber exactly like the WPA.
  • We are designing stainless steel 'dosing' screens that should be available within three to four weeks.
  • We are replacing the oil & wax cup with stainless steel oil & wax pads - these should be available within three to four weeks.
We are concentrating most of our efforts on the development of our new FIERCE vaporizer that will be available towards the end of April. We received the initial prototype (non-working) a few weeks ago and we gave it a couple of aesthetic tweaks. We will be receiving the first working prototypes within the next two to three weeks and we will share some technical information, pictures and videos at that time.

Happy Holidays!
Healthy Rips Team
https://www.healthyrips.com

You guys are the best!!

Two questions:

1 - Are you willing to reveal the dimensions of the FIERCE?

2 - Are you willing to say whether the same WPA and stems will be compatible with both FURY and FIERCE?


Thanks!
 
StonerSloth,
  • Like
Reactions: Summer

HealthyRips.com

Healthy Rips Team
Company Rep
Almost time to start a Fierce thread...

We agree with @Mr. Me2 - we need to start a FIERCE thread soon :)

@DelaSheck, We will be utilizing the same Convection Technology as all of our vaporizers which can be best described as follows: The Convection Technology of our Healthy Rips vaporizers combines full hot air convection heating with a slight amount of radiant heat (from the Convection heating element) giving you massive vapor production from the very first draw. This unique Convection Technology gives you extremely even extraction without ever needing to stir your material.

@StonerSloth,
The dimensions of the FIERCE are: 2 3/4" (Width) X 3 1/2" (Height) X 1" (Depth).
The FIERCE will have a larger chamber than the FURY/FURY 2 - so the WPA and stems will not work on the FIERCE. We also have a different design for the FIERCE glass implements because the FIERCE will have a quartz chamber - and inserting glass stems into the chamber could damage the quartz.

Once we have tested the working prototypes - we will start the FIERCE thread and provide a ton of exciting information about the FIERCE.

Merry Christmas!
Healthy Rips Team
https://www.healthyrips.com
 

Fat Freddy

FUCK CANCER TOO !
We agree with @Mr. Me2 - we need to start a FIERCE thread soon :)

@DelaSheck, We will be utilizing the same Convection Technology as all of our vaporizers which can be best described as follows: The Convection Technology of our Healthy Rips vaporizers combines full hot air convection heating with a slight amount of radiant heat (from the Convection heating element) giving you massive vapor production from the very first draw. This unique Convection Technology gives you extremely even extraction without ever needing to stir your material.

@StonerSloth,
The dimensions of the FIERCE are: 2 3/4" (Width) X 3 1/2" (Height) X 1" (Depth).
The FIERCE will have a larger chamber than the FURY/FURY 2 - so the WPA and stems will not work on the FIERCE. We also have a different design for the FIERCE glass implements because the FIERCE will have a quartz chamber - and inserting glass stems into the chamber could damage the quartz.

Once we have tested the working prototypes - we will start the FIERCE thread and provide a ton of exciting information about the FIERCE.

Merry Christmas!
Healthy Rips Team
https://www.healthyrips.com


vape_merry_vaping_santa_christmas_card-r23f891ee26554532b0485c7a6726dd96_xvuak_8byvr_540.jpg

.
 

HighCheese

Well-Known Member
Is there any way to clean the airpath below the chamber? I clean the chamber and mouthpiece after every use, deep clean once a week, but have noticed the draw resistance is continually increasing. It seems as though it is a design flaw to have no way of cleaning below the chamber, since material must drop in there. The Fury 2 is still awesome, having taken over the M and Pax 3 as my daily driver, but I'm hoping to ensure it remains that good.
 

bossman

Gentleman Of Leisure
Hi @almost there, Great to hear you are enjoying your FURY 2!
Here is the latest on the FURY 2:
  • We have a new WPA available on our website that has a chamber capacity of .1g to .12g. Our original WPA has a chamber capacity of .065g to .08g.
  • We have designed a glass mouthpiece stem that is in production now and will be available within two to three weeks that will have a chamber capacity of .1g to .12g. This will insert into the chamber exactly like the WPA.
  • We are designing stainless steel 'dosing' screens that should be available within three to four weeks.
Thanks for this update and please email your customers (like me) when these accessories are ready. I've been using the WPA as a microdosing mouthpiece but a proper glass mouthpiece with more space for cooling would be a great upgrade.
 

bossman

Gentleman Of Leisure
Following up on the excellent suggestion from Dirtrider, my DaVinci waterpipe mouthpiece arrived today. I just wanted folks to see the absurd Russian doll packaging job from PIU. Presumably they just use bunches of free padded envelopes from USPS to save money. But good lord, this piece of glass came rolled in paper that was rolled in a padded envelope, sealed in another padded envelope, inside a Priority Mail box... inside another sealed padded envelope.. inside a sealed generic shipping bag. I felt like I was getting punked opening this thing!

2947482469414625882%253Faccount_id%253D0
 

emilyk9055

New Member
Following up on the excellent suggestion from Dirtrider, my DaVinci waterpipe mouthpiece arrived today. I just wanted folks to see the absurd Russian doll packaging job from PIU. Presumably they just use bunches of free padded envelopes from USPS to save money. But good lord, this piece of glass came rolled in paper that was rolled in a padded envelope, sealed in another padded envelope, inside a Priority Mail box... inside another sealed padded envelope.. inside a sealed generic shipping bag. I felt like I was getting punked opening this thing!

Wow, all of that waste for 1 little WPA. I find that really unsettling. I get it, they don't want it to break. But that's just excessive shit going into the landfills

Is there any way to clean the airpath below the chamber? I clean the chamber and mouthpiece after every use, deep clean once a week, but have noticed the draw resistance is continually increasing. It seems as though it is a design flaw to have no way of cleaning below the chamber, since material must drop in there. The Fury 2 is still awesome, having taken over the M and Pax 3 as my daily driver, but I'm hoping to ensure it remains that good.

I kinda have the same question. I noticed way earlier in the thread, HR showed up to answer this and said subsequent heatings will just burn off whatever little material that gets in there. But I personally think material must collect under there, it can't just disappear, right? I'm not sure.
 
Last edited by a moderator:

Cjisohsocool

Well-Known Member
Following up on the excellent suggestion from Dirtrider, my DaVinci waterpipe mouthpiece arrived today. I just wanted folks to see the absurd Russian doll packaging job from PIU. Presumably they just use bunches of free padded envelopes from USPS to save money. But good lord, this piece of glass came rolled in paper that was rolled in a padded envelope, sealed in another padded envelope, inside a Priority Mail box... inside another sealed padded envelope.. inside a sealed generic shipping bag. I felt like I was getting punked opening this thing!

2947482469414625882%253Faccount_id%253D0

Hey can you post a picture of what it looks like on the fury?
 

StonerSloth

cui bono?
I am looking forward to the release of the Fierce! It sounds like it will be similar in size and features to the Arizer Go. I think I have decided I'm 'only' going to get one or the other hah.

Merry Christmas y'all :peace:
 

AtomicPB

Well-Known Member
I am looking forward to the release of the Fierce! It sounds like it will be similar in size and features to the Arizer Go.

Hi @midnight rider, -...- We think that you may be referring to our new vaporizer that we are currently designing and developing. It will be quite a bit larger than the FURY 2 and will be more of a home-use portable vaporizer - about the size of the Mighty. It will have all the goodies that everyone wants in a vaporizer - and we are trying to keep the price around $220 with free USA shipping. We promise that we will announce more details as we progress through the development process.


All the Best!

Healthy Rips Team

https://www.healthyrips.com

As the ArGo seems to fall in the "ultra portable" or "pocketable" size categorie (same as Fury2), I would assume that the Fierce is not be expected to have a similar small form-factor as the ArGo if @HealthyRips.com compares it to the Mighty.

Just assuming here though on the basis of the quoted post by @HealthyRips.com .

A merry Christmas to all of you guys and gals. :)
 

Dirtrider

Well-Known Member
Bossman. Thanks for posting. That is the one. I don't think I can upload pics from computer (like other forms) - correct me if I am wrong - and don't have a third party image hosting account right now.

I tried the Fury 2 over the weekend. Overall, I think the other reviews are spot on. Nice fit and finish. Great size but I prefer it was thinner to reduce pocket profile. Great interface. Seems well made. I am still getting some new vape smell, but it is minor and only noticed it when not vaping - otherwise vapor overpowers it.
I do have some concern about the mouth piece plastic wearing over time, but that is an easily replaceable part. Battery duration is a bit shorter but that is part of being a compact vape, so I expect that.

For my first use, I loaded a medium amount (for me) and went after it. My first impression was that the vape was wimping and not working. The flavor was very smoother and the vapor not harsh. Even the air was pretty cool. I felt like it was not working. Because of this, I bumped up the temp and ran another session with the load. - AND THEN, it HIT me. I found myself kinda walking around the house talking to myself - we have all been there. It hit me hard. I thought because the vapor was so smooth and not harsh it was not working but oh yes, it was working. I like it. I even tried it once without the screen cause I forgot and it work good. I take very slow draws to let the heat build. This one is a keeper. Herb was nice and dark brown with no burning. I like this vape. Works for medium load and microdosing. I think the mouthpiece is good too because it does not create a hot spot inside the mouth because it has a wide opening and disperses the hot air.

I did not try my bubbler. Sorry. Just did not have the right opportunity and honestly the vapor was smooth enough that I was not that motivated to change anything.
 

bossman

Gentleman Of Leisure
Bossman. Thanks for posting. That is the one. I don't think I can upload pics from computer.

That was totally my first experience with the Fury 2 as well: two low temp draws... thought it wasn't working so hot... two higher temp draws.. and then four plus hours of fun and who knows what with me being like "oh.. wow. okay." I've been in the 2.5 to 3 range since then using the WPA as a micro. The bubbler mouthpiece arrived but I still have a full pack half done in there before I try it.

It'll be cool to have a glass mouthpiece option and whatever else HR releases this winter. I'm really just trying to dial this vape in for microdosing.
 

joint46go

Well-Known Member
This vape after 4 month of use is like a new ..
For me is the best vape in the market powerfull , smoother, fast , great taste and simple to use and clean ...

But For new version i want a mouthpiece can be soaked in iso without lose the paint ...

The battery is a miracle for the dimension of this unit but battery swap is really appreciated

I can't wait to try the new vaporizer
 

Likun

Well-Known Member
I just received my device and need some advice before initial use. It came with battery fully charged and I did 3 burn outs at highest temperature. Can I just soak the moutpiece in soapy water? Or anything else to do?
 

Dirtrider

Well-Known Member
Haha thanks for the advice! I'm just a little concerned as i still got that plastic (or silicone) taste and smell coming from the mouth piece.

You can also run a small load through it but don't really inhale. I do that as part of the burn off and to 'coat' the insides with vapor residue. I take small draws but don't really inhale. Covers the smell and cleaning it again gets rid of both smells/tastes. I agree though, the fury does have a bit of smell that stays around. I don't know where it comes from because I can tell the vapor path is isolated and all the parts are clean. I get it more from the bowl heater than the mouth piece. I did not notice it (I think) on my last use though.
 

HealthyRips.com

Healthy Rips Team
Company Rep
This vape after 4 month of use is like a new ..
For me is the best vape in the market powerfull , smoother, fast , great taste and simple to use and clean ...

But For new version i want a mouthpiece can be soaked in iso without lose the paint ...

The battery is a miracle for the dimension of this unit but battery swap is really appreciated

I can't wait to try the new vaporizer
HI @joint46go, Look what we will have available for the FURY 2 in about 10 days :):

fury2-mouthpiece-wpa_orig.png


This new glass mouthpiece will insert into the FURY/FURY 2 the exact same way as the WPA.
Chamber capacity: .09g to .11g. Price: $20 with free USA shipping (as always).

@HealthyRips.com we need some fierce eye porn ..lol hope to see some pics up soon
Hi @Meach, We will have our FIERCE vaporizer working prototype in about a week. No worries - we will post some pictures very soon. We are dying to show you all!

Happy New Year!
Healthy Rips Team
https://www.healthyrips.com
 
Last edited:
Top Bottom