• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Gear Bubbleman Trinity Tank

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
No wonder I struggled, I was not given one of those.

Please contact Blue River they should be able to fix the situation.


On a side note here is the XL next to the original Trinity.

iPHNNZ8.jpg
 

PPN

Volute of Vapor
On a side note here is the XL next to the original Trinity.
When it will be avalaible..? I was on the fence to place an order for some more Trinity tanks but would wait for the XL..

Personally the loading was a pia for me since I didn't got a syringe designed for that purpose, although I managed to load it with my precious dabber which comes with the Hercule and some heat from a lighter. Although I ordered a 5ml syringe with some stuff for e-liquids but still not get it.
 

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
When it will be avalaible..? I was on the fence to place an order for some more Trinity tanks but would wait for the XL..

Personally the loading was a pia for me since I didn't got a syringe designed for that purpose, although I managed to load it with my precious dabber which comes with the Hercule and some heat from a lighter. Although I ordered a 5ml syringe with some stuff for e-liquids but still not get it.


They should be here around the 18th of this month. Our friends at http://teamgreenonline.co.uk/ will receive it within 2-3 weeks after that.
 

Danksta

Well-Known Member
Please contact Blue River they should be able to fix the situation.


On a side note here is the XL next to the original Trinity.

iPHNNZ8.jpg

I dug around last night and found it the bag with the terps. It was my fault for not seeing it. You guys are great at shipping and I appreciate it. The only suggestion would be to pack the parts together. I had several pieces that were buried in popcorn packing. I almost tossed the bubbleman tank as the box is white and just blends in. Just a thought.

Very excited to pre-order an XL this week. :tup:
 

Danksta

Well-Known Member
I spent the weekend with my cart I made from the previous weekend. I am very very impressed by these carts. It tasted good until the very end. There is still some oil by the heater but it doesn't seem to be close enough to vape. Is there always a minor amount leftover?

I think these carts are worth the hassle. I got so many great tasting hits and get very medicated from it.

I'll be getting the XL this week. I think these way nicer than traditional LAYG devices. :D
 

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
I spent the weekend with my cart I made from the previous weekend. I am very very impressed by these carts. It tasted good until the very end. There is still some oil by the heater but it doesn't seem to be close enough to vape. Is there always a minor amount leftover?

I think these carts are worth the hassle. I got so many great tasting hits and get very medicated from it.

I'll be getting the XL this week. I think these way nicer than traditional LAYG devices. :D

Unfortunately some oil left over is common with all oil vaporizers.

We are working on something that might vaporize everything but that’s in the far future and not sure we will finish that project.
 
Last edited:

420democrat

Well-Known Member
So I'm loving my trinity tank but had some questions
I ordered a few kits for my shop and decided to keep one for myself
My results with the bubbleman battery are inconsistent but I'm sure it's user error with my smok mod at around 17 watts I get unreal hits that put my nail to shame and would like similar results with the bubbleman battery
Aside from that I'm getting a fair bit of clogging/restriction I'm not sure if that's from my fudge up while filling when I globes dissalate down the middle tube or what I've since taken a blow dryer to it and cleaned the tube but still get occasional clogging
Aside from that this thing blows all little cartridges out the water
Blows through material quickly too though
awesome tank can't wait to order some xl tanks
 

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
So I'm loving my trinity tank but had some questions
I ordered a few kits for my shop and decided to keep one for myself
My results with the bubbleman battery are inconsistent but I'm sure it's user error with my smok mod at around 17 watts I get unreal hits that put my nail to shame and would like similar results with the bubbleman battery
Aside from that I'm getting a fair bit of clogging/restriction I'm not sure if that's from my fudge up while filling when I globes dissalate down the middle tube or what I've since taken a blow dryer to it and cleaned the tube but still get occasional clogging
Aside from that this thing blows all little cartridges out the water
Blows through material quickly too though
awesome tank can't wait to order some xl tanks

Glad you like it.

To remedy this issue you need to pull push pull.

What this means is start inhaling before you push the button and keep inhaling after you let go.
 

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
I've been practicing this but I'm still getting clogs frequently
I'll try longer inhales

What is ideal wattage when using a mod that isn't the trinity tank?

14-16 watts is ideal I go up as much as 19 but then Tc is really recommended for that.

Is there any heat up time ? I mean do you heat the coil up before using it? As this can cause it.

Can you give me the full settings you use let me see what’s going on.
 
Last edited:

420democrat

Well-Known Member
14-16 watts is ideal I go up as much as 19 but then Tc is really recommended for that.

Is there any heat up time ? I mean do you heat the coil up before using it? As this can cause it.

Can you give me the full settings you use let me see what’s going on.
I typically just start inhaling and than hit the button
Once I let off I continue inhale for a while
I pulse a lot with the trinity battery and with my mod I just do 4-5 seconds with heat on
I always start inhale before hearing and stop inhaling a while after I let go of the heat
 

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
I typically just start inhaling and than hit the button
Once I let off I continue inhale for a while
I pulse a lot with the trinity battery and with my mod I just do 4-5 seconds with heat on
I always start inhale before hearing and stop inhaling a while after I let go of the heat

How many hits per session? Feels like the tank is getting really warm and not enough cool down hits, which translates to flooding of the coil chamber.

Is the tank getting hot and staying hot for a long periods at a time?
 

420democrat

Well-Known Member
How many hits per session? Feels like the tank is getting really warm and not enough cool down hits, which translates to flooding of the coil chamber.

Is the tank getting hot and staying hot for a long periods at a time?
Yes I get it fairly hot as I do multiple hits at once... I'll have to slow down some or do more cooldown hits

What would be the proper way to set temp control for this tank? Ti? Ss? I've never used tc mode on my mods and am quite interested in the concept
 

mc

Well-Known Member
Yes I have the same experience. Mine gets way too hot quickly so I've switched back to the vape710.ca carts until I can try a Trinity XL.

However that's with old tough rosin, I assume with distillate I woulnd't have to rock it as hard to get vapor flow.
 

420democrat

Well-Known Member
Yes I have the same experience. Mine gets way too hot quickly so I've switched back to the vape710.ca carts until I can try a Trinity XL.

However that's with old tough rosin, I assume with distillate I woulnd't have to rock it as hard to get vapor flow.
Yea I haven't tried shatter/rosin yet though tonight I may try loading a half gram of shatter+terps and see how it goes

I just like chasing lung busting hits which it does a lot better on my mod I think I created the issue using the bubbleman battery
 
420democrat,

Danksta

Well-Known Member
Will the XL stay cooler?

14-16 watts is ideal I go up as much as 19 but then Tc is really recommended for that.

Is there any heat up time ? I mean do you heat the coil up before using it? As this can cause it.

Can you give me the full settings you use let me see what’s going on.

What are your TC settings when you go to 19? Highest I've gone is 12. Hyped to try the higher watts.
 
Last edited:
Danksta,

420democrat

Well-Known Member
So I don't know if it's my technique or the particular tank I am currently using but I feel like it leaks as much as I vape
I know I'm not consuming a half gram a day and every time I run a paper clip through the unit there's 2-3 dabs worth of material I've harvested almost .5(typo)of material from 4 tanks(2 grams) just sliding my paper clip through when it's clogged
I'm hoping this isn't just a normal thing
 
Last edited:
420democrat,

420democrat

Well-Known Member
I'm not able to get the clouds I was getting before either I think maybe I broke something because the cart is flowing fine
Gonna order another and an xl and try again after I finish what's loaded into this one
 
420democrat,

maxymods

Well-Known Member
Has anyone used this tank with crumble thinned out with cannabis derived terpenes? Or shatter and what were your results if you did? I ordered an XL and am wondering if it’s best for me to wait until I get distillate to use the tank or if I should try it with crumbly concentrates. Thanks!!
 
maxymods,
Top Bottom