• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Multi-brand HEALTHY RIPS FURY

emilyk9055

New Member
Does anyone know - Is it bad to leave the WPA in while it cools down?

I had a bad experience with doing this with my Air. It was fine for many, many times then i noticed the o-ring in the chamber started getting loose and before long, the glass stem wouldn't fit firmly in the oven anymore. It just rattled around and lost the airtight seal.
 

Jill NYC

Portable Hoarder
Does anyone know - Is it bad to leave the WPA in while it cools down?

I had a bad experience with doing this with my Air. It was fine for many, many times then i noticed the o-ring in the chamber started getting loose and before long, the glass stem wouldn't fit firmly in the oven anymore. It just rattled around and lost the airtight seal.
Based on those stories in other threads, I go with the old “better safe than sorry” motto.
I always take it out after a session and just flip it over and put back in bowl upside down.
Just don’t change your mind soon after and put your lips on the mouthpiece. Been there, done that. Ouch.
 

AtomicPB

Well-Known Member
Does anyone know - Is it bad to leave the WPA in while it cools down?

I don't know how it will affect anyones WPAs or Fury or if it's recommendable but when I forgot to take the WPA out a few times nothing happened to it or the Fury. I just warmed the Fury up to 180°C before I took the WPA out again and everything was fine.

Since my Girlfriend used her Jedi mindtricks on me to give her my Fury, I can only use it on weekends when we see each other and every weekend I am surprised again how convenient and efficient this little fella is especially with the WPA. :luv:
 
Last edited:

bossman

Gentleman Of Leisure
Never mind. I found a perfect fit for one I had at home. I will post more later with the info.
What was your fitted bubbler for the Fury 2?

I just got one and I'd like to learn about glass mouthpieces and smaller sized bubbler options that would work well with it. All the Evic accessories in this pic outline the stuff I'd like to know about. I have the included WPA, I've just never bought any glass before outside of a bowl for combustion.
groupoverview-1200x1200.png
 
bossman,

bossman

Gentleman Of Leisure
Yeah, I just tried using the WPA as a glass mouthpiece for the first time and I love the microdose option but the adapter itself is too small for adequate cooling. I wrote to HR and they said they were working on a glass mouthpiece accessory... which I take to also mean there is no third party option?
 
bossman,
  • Like
Reactions: Summer

Dirtrider

Well-Known Member
What do you mean the adaptor is too small for adequate cooling? I don't understand?

This is the bubbler I had and it fits perfectly. Very tight air seal when paired up. It is the deal of the century at only $14. I bought it for another vape but it did not fit right. I have not tried it yet with herb in the Fury but I will this weekend. I typically (try to)only partake on the weekends. It is the IQ bubbler from PIU. Has a 10 mm joint. You could use it with or without water to cool the air. It is kinda big, but if a bubbler is too small it does not work as well. Fill with water and chill in the fridge - Come on Friday get here !!

DaVinci IQ - 10mm Water Filtration Mouthpiece

http://www.puffitup.com/DaVinci-IQ-H2O-Mouthpiece-p/qtqc.iq-bubb_10mm.htm

Support Puff It Up. They are good people, good prices, and great service.
 
Last edited by a moderator:
Dirtrider,
  • Like
Reactions: ataxian

bossman

Gentleman Of Leisure
What do you mean the adaptor is too small for adequate cooling? I don't understand?
I'm saying if I just use the WPA as a mouthpiece the vapor is hotter than the black plastic mouthpiece. Of course the WPA would be fine with a water pipe but I don't have one yet and wanted a smaller option.
 
bossman,

Dirtrider

Well-Known Member
I'm saying if I just use the WPA as a mouthpiece the vapor is hotter than the black plastic mouthpiece. Of course the WPA would be fine with a water pipe but I don't have one yet and wanted a smaller option.

Check out the one I posted above from PIU. Perfect fit for mine.

Also, try drawing in some air from the side of your mouth from the vape draw - mixs cool air with hot air and cuts the vape density
 
Dirtrider,

Grepper

Truth to prevail
What do you mean the adaptor is too small for adequate cooling? I don't understand?

This is the bubbler I had and it fits perfectly. Very tight air seal when paired up. It is the deal of the century at only $14. I bought it for another vape but it did not fit right. I have not tried it yet with herb in the Fury but I will this weekend. I typically (try to)only partake on the weekends. It is the IQ bubbler from PIU. Has a 10 mm joint. You could use it with or without water to cool the air. It is kinda big, but if a bubbler is too small it does not work as well. Fill with water and chill in the fridge - Come on Friday get here !!

DaVinci IQ - 10mm Water Filtration Mouthpiece

http://www.puffitup.com/DaVinci-IQ-H2O-Mouthpiece-p/qtqc.iq-bubb_10mm.htm

Support Puff It Up. They are good people, good prices, and great service.

Any chance you could post a photo of that setup? Looks like a great idea for added water filtration on the cheap.
 
Grepper,

bossman

Gentleman Of Leisure
Check out the one I posted above from PIU. Perfect fit for mine.
Oh, I see now. Sorry, I was having some account problems and didn't see that you'd explained all about that DaVinci accessory. I'm gonna try it out, thanks!
 
Last edited:
bossman,

Likun

Well-Known Member
Has anybody found some basket screens to fit in the chamber? I like the ideas of having some kind of capsule system like I always use it with mymtubo. It's great for prepacking and microdosing.
 
Likun,

almost there

Well-Known Member
my Fury 2 came in yesterday, have to say I'm pretty impress with the value of this little guy. My hopper was on it's last leg(again) and from everything I've read it's a great candidate to replace the hopper in the stealth department. Super small, smaller than my IQ even and combined with the low draw resistance it's definitely going to be my travel companion. I'm not crazy about the native mp, it has a smell that hasn't faded even though I soaked it in soapy water for hours, the wpa rocks though. I would love to have a couple of black glass stems that I can preload, sounds doable @HealthyRips.com?
 

C No Ego

Well-Known Member
my Fury 2 came in yesterday, have to say I'm pretty impress with the value of this little guy. My hopper was on it's last leg(again) and from everything I've read it's a great candidate to replace the hopper in the stealth department. Super small, smaller than my IQ even and combined with the low draw resistance it's definitely going to be my travel companion. I'm not crazy about the native mp, it has a smell that hasn't faded even though I soaked it in soapy water for hours, the wpa rocks though. I would love to have a couple of black glass stems that I can preload, sounds doable @HealthyRips.com?
leave it natural glass .... those little WPA for the fury Rock!
 

HealthyRips.com

Healthy Rips Team
Company Rep
Hi @almost there, Great to hear you are enjoying your FURY 2!
Here is the latest on the FURY 2:
  • We have a new WPA available on our website that has a chamber capacity of .1g to .12g. Our original WPA has a chamber capacity of .065g to .08g.
  • We have designed a glass mouthpiece stem that is in production now and will be available within two to three weeks that will have a chamber capacity of .1g to .12g. This will insert into the chamber exactly like the WPA.
  • We are designing stainless steel 'dosing' screens that should be available within three to four weeks.
  • We are replacing the oil & wax cup with stainless steel oil & wax pads - these should be available within three to four weeks.
We are concentrating most of our efforts on the development of our new FIERCE vaporizer that will be available towards the end of April. We received the initial prototype (non-working) a few weeks ago and we gave it a couple of aesthetic tweaks. We will be receiving the first working prototypes within the next two to three weeks and we will share some technical information, pictures and videos at that time.

Happy Holidays!
Healthy Rips Team
https://www.healthyrips.com
 

Mr. Me2

Well-Known Member
Hi @almost there, Great to hear you are enjoying your FURY 2!
Here is the latest on the FURY 2:
  • We have a new WPA available on our website that has a chamber capacity of .1g to .12g. Our original WPA has a chamber capacity of .065g to .08g.
  • We have designed a glass mouthpiece stem that is in production now and will be available within two to three weeks that will have a chamber capacity of .1g to .12g. This will insert into the chamber exactly like the WPA.
  • We are designing stainless steel 'dosing' screens that should be available within three to four weeks.
  • We are replacing the oil & wax cup with stainless steel oil & wax pads - these should be available within three to four weeks.
We are concentrating most of our efforts on the development of our new FIERCE vaporizer that will be available towards the end of April. We received the initial prototype (non-working) a few weeks ago and we gave it a couple of aesthetic tweaks. We will be receiving the first working prototypes within the next two to three weeks and we will share some technical information, pictures and videos at that time.

Happy Holidays!
Healthy Rips Team
https://www.healthyrips.com
Almost time to start a Fierce thread...
 

Cjisohsocool

Well-Known Member
Hi @almost there, Great to hear you are enjoying your FURY 2!
Here is the latest on the FURY 2:
  • We have a new WPA available on our website that has a chamber capacity of .1g to .12g. Our original WPA has a chamber capacity of .065g to .08g.
  • We have designed a glass mouthpiece stem that is in production now and will be available within two to three weeks that will have a chamber capacity of .1g to .12g. This will insert into the chamber exactly like the WPA.
  • We are designing stainless steel 'dosing' screens that should be available within three to four weeks.
  • We are replacing the oil & wax cup with stainless steel oil & wax pads - these should be available within three to four weeks.
We are concentrating most of our efforts on the development of our new FIERCE vaporizer that will be available towards the end of April. We received the initial prototype (non-working) a few weeks ago and we gave it a couple of aesthetic tweaks. We will be receiving the first working prototypes within the next two to three weeks and we will share some technical information, pictures and videos at that time.

Happy Holidays!
Healthy Rips Team
https://www.healthyrips.com

UU2dM.gif


I mean seriously... I can't wait to try all of those lol.
 

b0

Cloudy...
Hi @almost there, Great to hear you are enjoying your FURY 2!
Here is the latest on the FURY 2:
  • We have a new WPA available on our website that has a chamber capacity of .1g to .12g. Our original WPA has a chamber capacity of .065g to .08g.
  • We have designed a glass mouthpiece stem that is in production now and will be available within two to three weeks that will have a chamber capacity of .1g to .12g. This will insert into the chamber exactly like the WPA.
  • We are designing stainless steel 'dosing' screens that should be available within three to four weeks.
  • We are replacing the oil & wax cup with stainless steel oil & wax pads - these should be available within three to four weeks.
We are concentrating most of our efforts on the development of our new FIERCE vaporizer that will be available towards the end of April. We received the initial prototype (non-working) a few weeks ago and we gave it a couple of aesthetic tweaks. We will be receiving the first working prototypes within the next two to three weeks and we will share some technical information, pictures and videos at that time.

Happy Holidays!
Healthy Rips Team
https://www.healthyrips.com

This is what amazes me the most and makes me want to suport this company. Everything we're asking for, they're making it. Thanks for listening to the comunity guys, you rock!
 
Top Bottom