Winegums

I make things from wood
Accessory Maker
I messed around with dyeing Maple a bit more. I tried to do a teal to green fade with this one and I think it came out okay. There's an annoying conundrum that happens when dying wood and sanding it smooth. You can't sand too much or you go through the dye and have to apply more, which raises the grain. Meaning that you have to do more sanding to get it smooth again.
il_fullxfull.1383601956_rksv.jpg
 

Diggy Smalls

Notorious
Loaded up a bowl of the dry remnants at the end of my stash with some rosin made from the same stash a few weeks ago and topped it off with some CBD shatter with "pineapple express terpenes". I like the way the cbd interacts with it all. Anyway, it tasted fucking awesome. And it just kept making clouds even though the herb looked pretty dark. I stirred it carefully and could tell it was all sticky as hell. So I just kept hitting it. The vapcap rules. I'm loving it a lot more this time around for some reason. I liked my woody, but I'm loving the m. I'm thinking I MIGHT like it more with the ti tip, but I can't justify spending ANY MORE money on accessories and shit. lol I shouldn't be buying CBD, but I did. lol

Anyway, dynavap is worth the price. It strikes a balance between simplicity and sophistication. I've been using it while on walks outside in the snow even. The M performs better outdoors. Someday I will have a few custom stems...induction heater from pipes...and a ti tip. A person can dream. And live through others photos. Please post more photos. :)

Yo that @Winegums stem is sick as hell. I love it!
 
Last edited:

CuckFumbustion

Lo and Behold! The transformative power of Vapor.
The "M" is one powerful UNIT 4 feeling nothing like before the BIG BANG.

I need to clean it all ready?

3 times per day. (clean day) = "M" day = CIVILIZED = NO WORRIES = MULTI-VERSE = TRUTH

@CuckFumbustion you use the VAP CAP?

This thing is strong!
I use it it more away from home base EVO. The 3D printed Dynastash that I have is handy for my portable. But the tiny magnet in the lid came out. Which I read about happening in one review. Tamped it back into place a little deeper. That seemed to do it. Back on the trail. Doing the EVO heat up trick to save butane. @ataxian since you don't like wood, you might want to get some Ti tips and caps. Does you M go places?

How about this?
Yea, I mentioned that in passing in one post. It has a much needed fan vent on the bottom. There is another model of dental wax heater around that has the same shut off feature. All come from China.
Any takers? Anybody care to review one? Anybody need to get their teeth filled?

@Pipes has went through the electrical current requirements and I wonder if these things are strong enough to make the click happen or if it will fall short by degrees. Depends how much mass of metal can be caused to vibrate and heat. :2c::hmm:

HI George!:wave: Dynavap Live 12.20.17 - YouTube
 
Last edited:

ataxian

PALE BLUE DOT
I use it it more away from home base EVO. The 3D printed Dynastash that I have is handy for my portable. But the tiny magnet in the lid came out. Which I read about happening in one review. Tamped it back into place a little deeper. That seemed to do it. Back on the trail. Doing the EVO heat up trick to save butane. @ataxian since you don't like wood, you might want to get some Ti tips and caps. Does you M go places?


Yea, I mentioned that in passing in one post. It has a much needed fan vent on the bottom. There is another model of dental wax heater around that has the same shut off feature. All come from China.
Any takers? Anybody care to review one? Anybody need to get their teeth filled?

@Pipes has went through the electrical current requirements and I wonder if these things are strong enough to make the click happen or if it will fall short by degrees. Depends how much mass of metal can be caused to vibrate and heat. :2c::hmm:

HI George!:wave: Dynavap Live 12.20.17 - YouTube
I have my own house?

I VAPE in my backyard garden.

Road trip a mod with a tank of ROSIN. (my wife is anti-smell)
I'm fine this way.

I have a "M" in my rotation.
Powerful and doesn't break when I drop it.

The EVO, NANO and "Q" I use and a bunch of MOD's.
CONCENTRATES R getting CHEAPER with our new harvest.

The 'M' I like because it's like a JOINT however Healthier!
WOOD is OK 4 some!
Used for ART yeah I can relate?
My SOLO will not die?

FLYING somewhere I take nothing.
When in EUROPE wine only.
Pot in EUROPE is not my cup of tea? (TOBACCO I never liked) France and England maybe!
In my culture we never mixed stuff with CANNABIS!
AMSTERDAM is the only place that's CIVILIZED in EUROPE!

AUSTRALIA during our spring just wine. (law's can be very strict)
BEER is accepted, however not CANNABIS?

In a 100 year's we might make the law work for the people the world over?
 
Last edited:

stark1

Lonesome Planet
I use it it more away from home base EVO. The 3D printed Dynastash that I have is handy for my portable. But the tiny magnet in the lid came out. Which I read about happening in one review. Tamped it back into place a little deeper. That seemed to do it. Back on the trail. Doing the EVO heat up trick to save butane. @ataxian since you don't like wood, you might want to get some Ti tips and caps. Does you M go places?


Yea, I mentioned that in passing in one post. It has a much needed fan vent on the bottom. There is another model of dental wax heater around that has the same shut off feature. All come from China.
Any takers? Anybody care to review one? Anybody need to get their teeth filled?

@Pipes has went through the electrical current requirements and I wonder if these things are strong enough to make the click happen or if it will fall short by degrees. Depends how much mass of metal can be caused to vibrate and heat. :2c::hmm:

HI George!:wave: Dynavap Live 12.20.17 - YouTube


We should be aware that infrared is NOT induction--but it should still work as a heat source, if you don't
Mind the electrical cord trailing behind you in your mile to go before you go to sleep....:zzz:
 

Mr.Sifter

Well-Known Member
The threadd is so massive.
No chance to read it all.
I tried a google search and found nothing acceptable.

What do you guys think of the materials used in the vapcaps.
Especially the tip and the cap.
They are made if titanium.
Is it save to inhale? No off-gasing?
I am getting a bit worried.
Not with the vapcap in general but materials used in vapes.
We all are the test-dummies.
Dont get me wrong.
I just want to ask what you think.
I like the fact there are no electronics which can fail and the parts that are involved in it that could be potentially harmfull. Like batteries and solder and stuff.

I know life is dangerous and will eventually kill you.
Still, we can be smart if we choose to.
 
Mr.Sifter,
  • Like
Reactions: JCharles

MinnBobber

Well-Known Member
What do you guys think of the materials used in the vapcaps.
Especially the tip and the cap.
They are made if titanium.
Is it save to inhale? No off-gasing?
I am getting a bit worried.
....................................................................
VapCaps would qualify as almost unbeatable/ almost no better vape for being true/pure/no off-gasing. It's all high grade metal in the air intake and then vapor path.
An all glass vape might be equal BUT is very fragile.
You could run over a VapCap with car/truck/semi/glacier :) and it would take the licking and keep on ticking....

There is no air flowing over electronics/wires/solder, no plastic, no realistic way for anything to off-gas with this vape.
 

Mr.Sifter

Well-Known Member
Ok, the tip is titanium.
Titanium gets used in professional hospital equipment.
Seems to be quite save.
Is it?
Better than stainless steel?
Or is it just the weight?

What about the cap.
Its a bi-metal.
One of the metal expands and "clicks" against the other.
What are these materials and are the save?
 
Mr.Sifter,
  • Like
Reactions: JCharles

stark1

Lonesome Planet
:clap:Oh, @PP you just can’t be beat, a mini IH before Xmas.... You are one lucky puppy!

Oh Me, and Oh my “poor me” portable adaptive ceramic heater.
Portable. And “wind” proof. But no MPIH....:D

Happy Holidays, Everyone! :nod::leaf:
vVOMqCu.jpg

If you are on the list for one of these then you should not be disappointed, great bit of kit.
Fierce but coupled with the M tip it's become my favorite IH.
SfN1F00.jpg

:tup:
 

Helios

Well-Known Member
I Purchased a few M's as stocking stuffers for Friends/family who I wish to wane off Combusting, has anyone here recently done this with minimal success? Took advantage of DV's free shipping. Having watched the live feed from George yesterday, I love the idea of having a metal alloy vong body/stem of some type down the line.
 

phattpiggie

Well-Known Member
Accessory Maker
Yes @stark1 Xmas and the Chinese and Canadian Santa, @Pipes.
All came thru for me this year.
SChHkXR.jpg

And you know how it works 'unless we seen it then it didn't happen':lol:
I'll kick off the proceedings.......
A little kief sandwich, you can see when it hits me and I'm venting vapor out of my nose as I continue the mouth pulls.
 
Top Bottom