Discontinued Supreme Vaporizer

Morty

Well-Known Member
I must be stoned. I thought the cat face was in reference to the post, not vice versa. Or is it vice a versa ? I'm confused. :hmm: I'm just gonna go hit my single I think. :science: :lol: Cleaning day w/ the SV3! Here's to hopefully getting something accomplished! :haw:

the hammer of Thor might be considered an antique to some...don't mean it won't smash you

TRUTH!!! Just like my bat & this dead donkeys ass! :horse:

Bat = SV3
Dead Donkey = Your Brain
 

Buildozer

Baked & Fried
@stark1...the hammer of Thor....
I call mine the Thor hammer too :cheers: You gotta learn to wield it responsibly! :ko:

LMAO @ that old max quote!! max never knew what the fuck he was talking about! :spliff: I think he just has an extreme aversion to dope vapes..
"Yeah, this dinky ass portable easily makes one of the sickest vapes in existence, an antique!"
:horse:
:rip:
 

biohacker

Well-Known Member
@Morty bro, I have been using the S&B concentrate pads... I just squish them into my glass reducer, but TBH I much prefer the organic cotton wrap. Even with smallish sized rosin dabs, I find they kinda 'run' around and make a bit of a mess. The taste is so heavenly though, especially at the temps we use for flower. But they are a bitch to clean/maintain IMO. The organic cotton wrapped dabs milk up so dense and the flavour is off the charts. I heat with the tube inserted for these, but sticking it in post heat gives even better flavour, just a little slower extraction to start. So heavenly with the j-hook as well! And that ash catcher is on the list for GAS this week buddy! :rockon:

@max :rofl:
 

lazylathe

Almost there...
@Morty

I would love to do a new S3 video for you!!!!..... BUT....
My S3 is all packed away and moved 300km away to our rental house yesterday!!
Awesome to see you using and loving a mod of mine!!! LOL!!

Remind me after Jan 12, 2018 and i will do a video using whatever you would like me to with the S3!

Oh and if you feelin' lazy today try this in the convection mod....
Herb, kief, herb, kief, pad with "trate....
It feels like this...
i4odXp1.jpg

Envision that the front of the jet is the start of your inhale, should be done by the rear of the cockpit, hold till telemetry aerial and start exhaling and BOOM.... Time to lie down!
 

Morty

Well-Known Member
Remind me after Jan 12, 2018 and i will do a video using whatever you would like me to with the S3!
YES! Will do!

@biohacker I will try the cotton! You have me curious as hell now. I've never had the problems you were mentioning w/ the Herbalizer pads, which makes me think your loading some phat dabs! :rockon:I always put a lot less in when doing convection style dabs w/ the Sup. I've easily put a third of gram (w/ room to spare) in the stock stem though when doing sandwiches! Cotton it is!
 

biohacker

Well-Known Member
@Morty they actually aren't that big... like 1/2 bb sized maybe? I dunno, perhaps it's the temperature, or the angle the heat is coming down at? It almost moved the dab to the side and leaked around the edge, but my sv3 was kinda at an angle due to the way it sits and leans in the reducer. Regardless, TBH I never really ever liked using those mesh pads... like I said before the maintenance sucks... what do you do just soak in ISO? The organic cotton works great, just make sure you use enough otherwise it will run through. More is better (cotton) IME, as limited as it may be...just make sure not to wrap the dab too tight. I've had incredible experiences and have been fortunate enough to have 28 different strains of high quality rosin on hand to test with! Flavours and experiences that have just put the biggest smile on my face possible!

Isn't it amazing how you can use this vape in full convection mode?? I don't cough using it this way either! But I do experience some hot spotting as I dial in the temps a bit more. Still would rather just insert after heating... there is a lot more convection going on here than I first thought. Still can't get over the flavour! Grinding is definitely going on the back burner.. flavour is just too damn good for too long with small parts of bud.

I'm back to using the butane blazer morty, the ignitor shit the bed and I busted the annoying safety off of it, but the convenience of the hands free heating is nice. Just wish the flame had a bit more oomph as it does take a while in comparison to the brule and propane.

anyways, i'm destroyed off some banana glue rosin... shit smells just like fresh bananas no shit!

Hey morty perhaps the herbie pads are a bit different than s&b?? From the FP thread, and I had the same experience with the FP too.

A few of us tried the SB pads, I tried the crafty pads.

To put it simply, none of us had decent results.
 

Morty

Well-Known Member
Hey morty perhaps the herbie pads are a bit different than s&b??
They're probably pretty similar. As far as cleaning, I agree they're a PIA. I actually ended up just pitchin' both of them after they got to messy & started tasting reclaimy. The taste you talk about w/ cotton really has me intrigued. Tried cotton before & didn't really like it, but that was w/ my old VapCap. In the vaping w/ cotton thread, alot of people are saying they're actually preferring hemp fiber to cotton. So...off to order some Elfwick Hemp Fiber! Wait till you see all the shit I've got/have comin' for the Supreme. It'll be sick! I'll take a family shot when all of it arrives.

Isn't it amazing how you can use this vape in full convection mode??
FUK YEAHZ!!! :rockon:A versatile vape indeed that can provide multiple signatures if you know what your doing!
 
Last edited:

biohacker

Well-Known Member
I actually ended up just pitchin' both of them after they got to messy & started tasting reclaimy

LMAO! I chucked mine after the last experience the other day and won't go back! With that said, I LOVED the bags of shatter (tasted amazing) in the herbalizer with a dab between 2 pads.

The taste you talk about w/ cotton really has me intrigued. Tried cotton before @ didn't really like it,

What didn't you like about it? I haven't read that thread yet, but I haven't experienced any downside (yet)? You know what a picky mofo I am! I only use organic cotton if it matters.

I've also gone back to using stock screens since i'm off grinding. I like abv skewer porn, but as you all know I have some serious problems/fetishes.

Morty I have 350 to invest in dhgate (stevenlmz79) JUST for the sv3!

@lazylathe what GetWhitePalm strains do you have? And have you found anything better? I have most of their strains and I still can't get over how awesome they all are! THCd is okay, especially their Quads, but nothing like GWP.
 

Morty

Well-Known Member
What didn't you like about it? I haven't read that thread yet, but I haven't experienced any downside (yet)? You know what a picky mofo I am! I only use organic cotton if it matters.
It had a dryer sheet kind of taste to it. I was using organic cotton as well, but like I said, it could have easily been b/c it was w/ a VapCap...OG. Super Dark ABV.

I've also gone back to using stock screens since i'm off grinding. I like abv skewer porn, but as you all know I have some serious problems/fetishes.
Got the small Underdog screens in last night. I could see these replacing the stock screen for me. We'll see though.

Morty I have 350 to invest in dhgate (stevenlmz79) JUST for the sv3!

Woah! :o Tame that GAS my man! :lol: It's DHGate, you don't need no $350! That ashcatcher cost me a whopping $15! Maybe put the $ towards getting Vapolution to stop jacking around & get some more 9mm straight glass stems IN STOCK! Sadly, I bet those are gone never to return. They say they'll get more in, but it's been forever, & w/ the 2.0 being discontinued, I have my doubts. But it's not all bad, b/c the 8mm do work, & performance is pretty much the same as the 9mm. The 9mm stems hold 1.5 x more material than the 8mm, making the 8mm stem perfect for microdosing. One can microdose w/ this beast if they so choose. Crazy I know! :p
 

biohacker

Well-Known Member
It's DHGate, you don't need no $350!

You do if you wanna take advantage of a $20 coupon that makes you spend $330 at least! :lol: Plus, i've been running on water tool fumes for years, so it's time to make up for all of that and have some fun! There are simply too many pieces I just have to try, then take a small loss and sell! :rofl:

I just found the 8mm way too restricted to use over the 9mm, but everyone has different tolerances. But I do agree they may never be seen again. Hoping for our homeboy @PeteSeattle to make an appearance again and build what we seek. I'm also going to ask @PlanetVape about it, and if we can get enough interest perhaps they will make us a batch. I'd be good for a dozen!
 

lazylathe

Almost there...
@lazylathe what GetWhitePalm strains do you have? And have you found anything better? I have most of their strains and I still can't get over how awesome they all are! THCd is okay, especially their Quads, but nothing like GWP.

Nothing at present unfortunately...
Last time i tried their GG#4 and it was bomb!!
The greasy Pink Bubba was pretty good, very tasty but not as potent as the GG.
I noticed pretty quickly that they reduced my consumption due to their strength!
Will be ordering again and save some for the @Morty show in January!

Talking about adapters, you just need to contact @Oregonglassblower !!
http://www.oregonglassblower.com/18mm-Female-Vape-Adapter-18fv.htm
It's as easy as choosing your joint specs, male or female, size of joint, size and length of tubing and even angle you want it to exit from the joint at! Ask to poke a hole wherever you want or just use a mesh basket!
 
Last edited:

Morty

Well-Known Member
That's a great idea @lazylathe. I could even send him one of my 9mm stems. We'd need the right thickness & length, which I'm guessing shouldn't be to terribly hard. After the holidaze, I think I'm gonna hit @Oregonglassblower up, & see if he can't rig something up like that. That would be tits! The ultimate SV3 stem! This would put my SAS into remission for sure!

Edit: Hey BH. Ended up ordering some VapCap degummed hemp fiber from PIU for $5 inc shipping. Will def pick up some organic cotton up to compare.
 
Last edited:

HellsWindStaff

Dharma Initiate
Using a brulee torch, actually started heating the top right side of unit, angled up so away from wires. Less temp jump only about 10 degrees and seems to maintain it better. When heating the very top it would shoot up, then drop kind of quickly.

Thing kind of reminds me of my old Herbalizer with regards to taste. May try some flavor chasing. Idk how to describe it but that first hit with full nugs makes my mouth gummy like my Herbalizer.

I love how easy it is to pack (no grind)

My girl, it was too much lol you see people get dab sweats and have to blow their nose and sneeze? That was her :lol:

I'm still kind of sick and it really is best cure you get so spaced, you don't even feel the aches!

Just did a huge one, gonna do another then sleepy :)

I will try convection mod at some point am interested in that, looks easy cause I have world of adapters.

Still need to try vapolution stem. I have lot of pieces but none of them have long joints really except one or two, and they aren't 14 male. So gonna try to see if I can do a.....I should be able to lol. Will try tmmrw. Provided the vap stem will fit down 18mm male hole (think it will) I def have a 14/18 FF adapter.

Edit: what's an I-inhale :lol: have only heard of SUPREME
 
Last edited:

Morty

Well-Known Member
that first hit with full nugs makes my mouth gummy
:drool: :nod:
My girl, it was too much lol you see people get dab sweats and have to blow their nose and sneeze? That was her :lol:
:lol: :rockon:
Provided the vap stem will fit down 18mm male hole (think it will) I def have a 14/18 FF adapter.

Are you talking about a reducer like this ?

https://vapolution.com/index.php?app=ecom&ns=prodshow&ref=VAP3-14-18-ADAPTER

If so, you bet your ass it will! :tup: Remember that the tube part you put the stem in fits perect in a 14mm female joint. Just load the Vapo2 stem (notch end in), & it will fit right in the above style adapter/reducer. EZ Peezy.
 

biohacker

Well-Known Member
Thing kind of reminds me of my old Herbalizer with regards to taste. May try some flavor chasing. Idk how to describe it but that first hit with full nugs makes my mouth gummy like my Herbalizer.

Yes! Have you tried inserting the stem after heat up? I find that it's very similar to the glass adapter convection mod, and actually prefer it. Flavour country!

@Morty, I used hands free mode with the blazer last night and had a supreme stoner moment with a distraction (since it takes so damn long to heat with it!)... anyways, I saw 255c :doh: It was only a dab in cotton so I waited until it was around 220ish and hit it! :whoa: Yeah, won't be doing that again, ever.

No harm done in the end, everything is as it should be! :D
 

Morty

Well-Known Member
@Morty, I used hands free mode with the blazer last night and had a supreme stoner moment with a distraction (since it takes so damn long to heat with it!)... anyways, I saw 255c :doh: It was only a dab in cotton so I waited until it was around 220ish and hit it! :whoa: Yeah, won't be doing that again, ever.

:clap: Been there, done that. Glad this thing is built like a tank.

anyways, I saw 255c
Should of just hit it then at that temp. You know, sound off like you got a pair. :lol: :p We're asking @WakeAndVape to try low to mid temps, the least you could do is reciprocate the gesture & take that high temp hit like a lion & not a lamb! :rockon: :rofl: ;)

@biohacker We got Lazy down for an eventual Triple Decker convection mod video. I know your not able to now, but could we get you down for a triple SV3 double Decker (3 Supremes w/ concentrate sandwiches hit all at the same time) video ? :party: :tinfoil: :bowdown:It would be...THE ULTIMATE SV3 VIDEO OF ALL TIME! (till some psycho comes along & does 4 :ninja:)


Honi soit qui mal y pense ! @Hosni (@Hogni) & @alex (@Alexis) :rofl: :wave: :spliff:
 
Last edited:

biohacker

Well-Known Member
Fellas! I would have totally hit that shit at 255c but I was too shitting my pants that something was going to melt on my sv3 or some shit! It was harsh enough at 220 after stewing from 255!

@Morty we have PlanetVape on the line interested in the work! Just need all the EXACT measurements, particulars, details... i'll have to go back and search, and it's looking something like $16cdn per stem if we get a dozen! POW!
 

Morty

Well-Known Member
$16cdn per stem if we get a dozen!
That works out to $75.60 US each if we split it. :ugh:

I'm kinda liking Lazy's custom OGB idea (though it won't be necessarily any cheaper). And it looks like most of the work is done for us.

http://oregonglassblower.com/14mm-Vape-Adapter-14mvaped.htm

Just need a straight version of this. It's 9.5 OD, so we'd need to shrink the diameter a skosh. Like I said above, I could send him my Vapo2 glass stem to show him the thickness we'd/I'd want. From there, I need to measure how long the stem should be & where it should end & the 14mm male joint should start. The joint of the glass stem needs to begin right under the silicone (where you insert the stem). From there I was thinking I want 2 versions. One w/ a notch just like the Vapo2 glass stem (for nugz) & one w/ no notch (for inserting the small Underdog screens & for use w/ ground bud). What do you think ?
 
Top Bottom