TUBO evic/dual

[funkyjunky]

I'm assuming the site must be on Swiss time vs. one of the states time zones?
Will you be offering a similar promo any time soon, or do you offer anything for FC members?

hmm, i dont know about the swiss time of the shop, need to check, havent thought about it, good point.
for now i want to keep prices at what they are. a sale during next year is very likely cant spill when tho (also i dont know yet)

ill think about a special FC deal, maybe an amount to spend on accessories or something.
(the best deal is to get in early...hinthint dual...)

 

[sickmanfraud]

@funkyjunky I saw that the Joytech Cyboid 200 is compatible with the TuboX.

My question is whether the TuboX would make seeing the top screen difficult / impossible??

 

[sk8man121]

Tubos be chargin'!

Thanks to @oddjobold for the Tubox trade, and also to @funkyjunky for kindly replacing my defective Tubo. I must say, the braided whip really makes the piece!

Sonic and Tails, respectively.

 

[oddjobold]

Tubos be chargin'!

Thanks to @oddjobold for the Tubox trade, and also to @funkyjunky for kindly replacing my defective Tubo. I must say, the braided whip really makes the piece!

Sonic and Tails, respectively.

Your welcome dude enjoy. Bit too big for my pocket. My loss your gain.

 

[funkyjunky]

@funkyjunky I saw that the Joytech Cyboid 200 is compatible with the TuboX.

My question is whether the TuboX would make seeing the top screen difficult / impossible??

yes its on the list, i use it mainly with my tubox. the tubox 510 connector keeps the display completely visual. see below:

this is the stand for the tubox btw (@Prolusio did show it in his vid), i will add it shortly to the shop.

the only downside for me with the cuboid200 is that charging over the usb port is taking forever for the three batteries. i took this as a reason to upgrade my battery charger: https://www.fasttech.com/products/0...ore-q4-2aquick-charger-4-slot-battery-charger
its a 2A charger, 4 slots. batteries charge four times quicker with two cells and two times quicker with 4 cells than my nitecore D2 i had before. can recommend very much.

Sonic and Tails, respectively.

love sonic and tails!

 

[dapperdopamine]

question to anyone with the ddave vaporcooler, how do you usually pack your herb in that stem, what works best, i put a rimless basket screen in but ive noticed the rimmed screen doesnt sit on tight like I would normally load it with the default stem to make sure herb isnt in the heater

 

[dapperdopamine]

question to anyone with the ddave vaporcooler, how do you usually pack your herb in that stem, what works best, i put a rimless basket screen in but ive noticed the rimmed screen that goes on top of the normal stem doesnt sit on tight like I would normally load it with the default stem to make sure herb isnt in the heater

 

[kuzko]

question to anyone with the ddave vaporcooler, how do you usually pack your herb in that stem, what works best, i put a rimless basket screen in but ive noticed the rimmed screen that goes on top of the normal stem doesnt sit on tight like I would normally load it with the default stem to make sure herb isnt in the heater

I shoved 2 rimless basket screens as far down the stem as possible. Then I pack into the stem and cap it with a rimmed basket screen.

I had the same problem with one of my rimmed baskets as you, it was so loose it would fall off, someone on here advised that you can make it fit better by pushing ever so lightly on the bottom of the basket and it will increase the diameter and it fits.

 

[dapperdopamine]

I shoved 2 rimless basket screens as far down the stem as possible. Then I pack into the stem and cap it with a rimmed basket screen.

I had the same problem with one of my rimmed baskets as you, it was so loose it would fall off, someone on here advised that you can make it fit better by pushing ever so lightly on the bottom of the basket and it will increase the diameter and it fits.

Have you seen any of those rimmed screens at smoke shops either, i dont want to keep transfering the one rimmed screen i have from the short mouthpiece to the vapor cooler, although i just took a rimless basket screen and pushed it in on top of the other one, which is fine, it just makes it a lot harder to remove while hot, which is annoying cause i like to check it to see how dark it is sometimes mid sesh

 

[kuzko]

Have you seen any of those rimmed screens at smoke shops either, i dont want to keep transfering the one rimmed screen i have from the short mouthpiece to the vapor cooler, although i just took a rimless basket screen and pushed it in on top of the other one, which is fine, it just makes it a lot harder to remove while hot, which is annoying cause i like to check it to see how dark it is sometimes mid sesh

I don’t remember ever seeing those at headshops but they may be. There’s some on eBay I think, not sure if they are the right size. Does DDave sell any? Also I think someone mentioned another vape that uses the same baskets and that company sells them but I forget what vape it was.

 

[Gray Area]

@kuzko @dapperdopamine They're Arizer EQ basket screens

 

[sofa]

i got my tubo couple of days ago and it growin on me. i have got a question: is it possible to use the tubo while charging battery via usb? or not recommended?

 

[leveltree]

@sofa it's possible at least, I don't think that someone unrecommended it.
But the tubo doesn't charge very quick so you're prolonging the use time only a bit (in my experience).
So it's easier to have multiple charged batteries laying around.

 

[Zementos]

Hey guys. Excited to be part of the family soon.

I'll treat it well.

 

[Gray Area]

R2D2... what else of course

Love the twin suns/hole in the wood effect

 

[sickmanfraud]

I don’t remember ever seeing those at headshops but they may be. There’s some on eBay I think, not sure if they are the right size. Does DDave sell any? Also I think someone mentioned another vape that uses the same baskets and that company sells them but I forget what vape it was.

https://www.amazon.com/gp/product/B073WQJYRS/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

 

[sickmanfraud]

Hey guys. Excited to be part of the family soon.

I'll treat it well.

@funkyjunky what is it and how do I get one?

 

[kilumenati]

I checked his Instagram and website, nothing like that shows up... I'm intrigued as well and will have to postpone purchasing the tubo evic until we find out more.

 

[Zementos]

R2D2... what else of course

Love the twin suns/hole in the wood effect

Yeh R2D2... somebody had to do it Actually the first thing that came to my mind when I first saw the tubo was that it kinda looks R2D2ish.
All probs for the sun hole to @funkyjunky. His idea.

@funkyjunky what is it and how do I get one?

Its a shell + connector for the PA.

 

[Gray Area]

Yep as @Zementos said it's the PA.
I have one on order too and it should come with my dual bat Tubo.

I'm constantly charging batteries, so thought I'd grab one for home use

Edit: just had a look and don't think either the PA or dual battery Tubo is on the website yet...

 

[kilumenati]

Yeh R2D2... somebody had to do it Actually the first thing that came to my mind when I first saw the tubo was that it kinda looks R2D2ish.
All probs for the sun hole to @funkyjunky. His idea.



Its a shell + connector for the PA.

Nice, that makes sense now, was wondering where the corded piece went, duh goes into the battery compartment of the eVic mini.
What would be cool is some additional Star Wars artwork on the adapter case.

 

[Tommy10]

Rocking a Mi and HP I guess as my closes comparison to this, looking for a new set up like 18650 looks like I got some reading to do.

 

[DougBentley]

Im having trouble finding where to purchase the water attachment for the tubo? In the on demand video the person is using what looks like a water pipe.

 

[Gray Area]

Im having trouble finding where to purchase the water attachment for the tubo? In the on demand video the person is using what looks like a water pipe.

The water piece adapters are in the store under accessories... 14 & 18mm versions:

http://shop.lamart.ch/index.php?route=product/product&path=64&product_id=122

http://shop.lamart.ch/index.php?route=product/product&path=64&product_id=101

 

[funkyjunky]

Im having trouble finding where to purchase the water attachment for the tubo? In the on demand video the person is using what looks like a water pipe.

you mean this?

you can get almost everything from the shop now:
the base: http://shop.lamart.ch/index.php?route=product/category&path=67
the whip: http://shop.lamart.ch/index.php?route=product/category&path=66
the cork adapter: http://shop.lamart.ch/index.php?route=product/product&path=66&product_id=105

the glass is from dhgate,
namely a D020: https://www.dhgate.com/store/product/d020-bubbler-hand-blown-glass-vase-perc-water/175832535.html
or a D020-D: https://www.dhgate.com/store/product/d020-d-9-inches-bubbler-glass-bong-water/244202146.html
i guess most bubblers having a flat bottom with diameter of ~9cm will fit.


also if you want to adapt a tubo you need a water pipe adapter like @Gray Area mentioned. there are water pipe adapters for many other vaporizers as well.