• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer

buddingglasshead

Well-Known Member

My bowl looks different even in comparison to those two. Mine has three rings at the top and two at the bottom.


Have a Rev 2 post coming soon. Label created. Can't wait to test! Using the adjustabowl/old bowl 50/50. Love the titanium double weave, but hate trying to keep it clean of debris. I prefer not to iso it though. I usually just suck through without any material (still get some vapor) and clean both sides of it with qtips. Will keep you guys updated when it gets here and I can do some testing with drop downs, adapters, etc.

I understand some may not like using dropdowns/adapters or see them necessary, may hinder performance (definitely not IME), but it's my preference for using my FP. I usually am using smaller glass (sub 8.5 inch) and don't like having that heat or metal directly on my glass. Not to mention directly in my face! Especially if you look like this :myday:
 

Baron23

Well-Known Member
What the fuck...I love New Vape and have always shared this fact.

The recent dust up over a leaky adjustabowl has never, ever, been about a leaky adjustabowl. This has not been about whether you like steama or dislike steama. It has never been about whether you agree with me or disagree with me. Not in the slightest.

What this has been about is the character and freedom of FC. FC is a place where people are free to discuss aspects of the art of vaporization. FC is a place where you can talk about things you learn about your favorite vape and share with like minds in the community. You can talk about how much you like your vape or even talk about aspects you dislike about a vape. The point is, you have the freedom to discuss almost anything you like as long as your intentions are honorable and honest there should be no problems.

This has been about a manufacturer getting involved with this thread on FC in a way that is destructive to the community and the spirit of FC. This manufacturer has tried to bully and intimidate people that post things he is in disagreement about. People participating at FC should be free to post whatever they choose as long as it is relevant and honest without the fear of reprisal from the manufacturer.

The manufacturer does not need to behave in this insulting manner. This is the way a bully behaves.

There's absolutely no way to prove or disprove any vapor is being diluted. That's a crazy unverified claim. Please consider that there are people here who thrive on drama, and love to show off their smarts at the expense of others. I've offered to completely refund people that are not 100% satisfied with any newVape part. Instead they must get more satisfaction of dragging me thru the f-ing mud.

In closing I will say I was one of the most vocal cheerleaders for New Vape and their products. I have absolutely zero motive to “show-off my smarts at the expense of others” or drag Edwyn through the mud. Why would I want to do this to the maker of the finest vaporizer I have ever used? It makes no sense.

My crime was discussing a leak I discovered in the adjustabowl here on FC. I thought this was the kind of thing FC is for. Isn't FC the place to talk about such things?

It can be wonderful when manufactures participate because it can dramatically enhance the thread. What I feel is important for manufacturers to remember is not to interfere with the regular order of an FC thread like you did in this situation.

Things will be much better for the FC community if when you participate @NewVape710 you remember to stay in your lane.

I love FC and I'm not going anywhere because of a little this and that.

Also, I have asked @NewVape710 for an ajustabowl refund and now the manufacturer has decided to ignore me instead.

Is anybody really surprised?

As one of our FC friends just said, in a different context: "I haven't known how to articulate my own feelings, but your words come the closest so far."
 

invertedisdead

PHASE3
Manufacturer
I'm still thinking this 12" CCG SOL piece would be great for the Showerhead.

rBVaI1mAGu-AcFGpAAKFlJzuPcQ707.jpg


still enjoying my 9" SOL perc piece, but I think something just a touch bigger like this 12 inch tube would be perfect for flower vaping those higher temps for more of a shotgun hit.
 

muunch

hotboxing the cockpit
Give it a go. Either that or the double-SoL perc CCG just made...

Honestly, I'm not too much of a fan of my FC-186, but my opinion on glass sometimes changes pretty drastically (see the eggsosphere) so who knows.

I use it right now to take fat rips when my throat hurts, because it does a great job of cooling the vapor. Unfortunately, with that massive ass can, it seeps out almost all of the flavor as well.

Pain in the nuts to get a satisfying rip out of because of how hard it is to regulate my drawspeed with it? idk how to describe it but meh. I'll give it another go now.
 

EmDeemo

ACCOUNT INACTIVE
I'm still thinking this 12" CCG SOL piece would be great for the Showerhead.

rBVaI1mAGu-AcFGpAAKFlJzuPcQ707.jpg


still enjoying my 9" SOL perc piece, but I think something just a touch bigger like this 12 inch tube would be perfect for flower vaping those higher temps for more of a shotgun hit.

I think I'm going to get something similar from TAG, similar shape, but without all the gubbins in the can.
 

buddingglasshead

Well-Known Member
Can people say what their favorite piece is to use with the FP? Or does it change depending on temp and stuff? Trying to decide what to go with. I'm starting to think the FC-186 is too big. I don't have huge lung capacity.


Current favorite is a double mai tai recycler from TAG, it's the one that stays in rotation at my desk for the longest. Other glass cycles daily and depending on how much I enjoy the piece maybe a little longer. The version before even the "OLD".


I prefer smaller rigs that would normally be considered oil rigs. We are dealing with vapor over smoke after all. :p I also like to keep my temps low with the SH around 550-575 depending on strain, day, etc.

Have nothing against China glass (especially that double SOL...) but I'm trying to support American glass blowers best I can. With my NVAS seemingly cured for the current moment since I really don't have anything to buy, I'll being looking into some Diesel Glass based out of Florida and BoroMojo on IG. Really great guy and awesome fume work. Also doing great things in the glass industry and exposing companies that sell themselves as American made but are really China

Edited to finish thought.. SH stronk
 
Last edited:

buddingglasshead

Well-Known Member
My American glass doesn't fit my Flowerpot :( been thinking about selling my 10mm mini tube for something I can use with my showerhead. Been lusting for a fumed Leisure Brick Stack incycler. Just not sure how it hits with flower.


drop downs, my friend. I know people hate them, (aesthetically I do, too) but I'd rather have all my glass available to me regardless of how it's set up. I have a 10mm female to 14mm female drop down that allows me to use any of my 10mm gear with the FP. 10mm male to male adapter for 10mm female rigs, but I'm sure you could get something similar without the need for two adapters. Just what I did to be cost effective. Either DHgate or eBay if you're too impatient.

I still need to try out my MangoGlass recycler with the FP, but I also just got new quartz specifically for it. It'll have to wait. :(
 

invertedisdead

PHASE3
Manufacturer
drop downs, my friend. I know people hate them, (aesthetically I do, too) but I'd rather have all my glass available to me regardless of how it's set up. I have a 10mm female to 14mm female drop down that allows me to use any of my 10mm gear with the FP. 10mm male to male adapter for 10mm female rigs, but I'm sure you could get something similar without the need for two adapters. Just what I did to be cost effective. Either DHgate or eBay if you're too impatient.

I still need to try out my MangoGlass recycler with the FP, but I also just got new quartz specifically for it. It'll have to wait. :(

What's the smallest piece you've used that dropdown on? My minitube is 5" with a 45 degree 10mm female removable downstem. Not sure the 45 degree downstem will handle the weight though.
 

buddingglasshead

Well-Known Member
What's the smallest piece you've used that dropdown on? My minitube is 5" with a 45 degree 10mm female removable downstem. Not sure the 45 degree downstem will handle the weight though.

Mango Recycler is 4.5 inches, but 90 degree 10mm female. I've mainly used the dropdown to allow use of my bigger 14mm bangers. The design of it allowed it to sit by itself with the banger in. I could heat it up this way and then attach it when ready. Could still work the same, just don't torch your FP. @Danksta :wave::rofl:
 

EmDeemo

ACCOUNT INACTIVE
Can people say what their favorite piece is to use with the FP? Or does it change depending on temp and stuff? Trying to decide what to go with. I'm starting to think the FC-186 is too big. I don't have huge lung capacity.

I genuinely love my D020/drop down set up, I'd just like to try something else to see how different it might be.
 

EmDeemo

ACCOUNT INACTIVE
0I20q3S.jpg

This little piece is a dream in every way and is perfect for the Flower Pot.


rBVaJFkOe8qATX54AAFLpPEoqJY664.jpg

This rattlecan bubbler is on the way. I an hoping this piece is good because of the low diffusion and the small amount of air at the top means less lung work. I don't know if this is a boom or a bust yet. We will soon see.

:myday:

The one you've noted as a dream, thats a similar set up to the D020 I guess? I think those types of percs and set ups are perfect for not getting much blow back. All the others I'm seeing have the perc so high up, meaning more water. The TAG ones might actually be what I'm looking for and cheap enough to make it worthwhile not going to DHgate.

That rattlecan... same thinking I've had with it, but never taken the risk. I figure I'm likely to either love it or hate it.

Very much looking forward to hearing your opinion on it in use with the FP.
 

ParanoidAndroid998

Well-Known Member
rBVaI1k1KpOAdWDLAAGcg_Bochk972.jpg

I hate this little bubbler because it feels like a toy imo.


envy-12-inch-straight-tube-bong-1_1_4225dcfb-9587-4d80-9ecb-e1e6d56b04f7_1024x1024.jpg

This straight tube takes a lot of lung -- too much work to be my daily driver.


0I20q3S.jpg

This little piece is a dream in every way and is perfect for the Flower Pot.


rBVaJFkOe8qATX54AAFLpPEoqJY664.jpg

This rattlecan bubbler is on the way. I an hoping this piece is good because of the low diffusion and the small amount of air at the top means less lung work. I don't know if this is a boom or a bust yet. We will soon see.

:myday:
The one you've noted as a dream, thats a similar set up to the D020 I guess? I think those types of percs and set ups are perfect for not getting much blow back. All the others I'm seeing have the perc so high up, meaning more water. The TAG ones might actually be what I'm looking for and cheap enough to make it worthwhile not going to DHgate.

That rattlecan... same thinking I've had with it, but never taken the risk. I figure I'm likely to either love it or hate it.

Very much looking forward to hearing your opinion on it in use with the FP.

Thanks guys. I do have a variation of yours @emmdeemo the D-020 D from Sunshinestore on DHgate, so maybe it will work well with the showerhead.

Edit: Although, as @emmdeemo pointed out, the FP would sit quite close to your face without using a drop down.

1.0x0.jpg
 
Last edited:

Danksta

Well-Known Member
Last edited:

Doktor Dub

Well-Known Member
Top Bottom