Divine Tribe atty's

Someone has already probably beat me to this, but are you setting up for TCR? I forget which unit you bought. VapeDonkey seems to like the ArticFox software, I'll be loading mine with that and go to PID settings. My 10mm DT V3 I have setup as follows with the standard Joyetech software: 24W, TCR=280, 430F (typically). I'll be curious how quick-heating that mesh is and how it changes the donut performance.

Are you using the mesh? I had a hard time with it coming out onto the splash guard. Looking for some people with experience to give some much needed tips.
 
interruptingpirate,
  • Like
Reactions: tennisguru1

bizwaxzion

Enigmatic Cannabist
Thank you, I wasn't sure what was needed, and couldn't find directions on the site. When I click on the download button for AF, it takes me to a page with topics that look like a forum, but it's all numbers. Are these the different versions? And would I need to download just the top (most recent) one?
Nfetools and the firmware files are paired together (Pxx nomenclature). When you click on one of the download links it does indeed take you to their forum page where the releases are announced. You should grab the latest release of each component. There's a google doc link in the 'Info & Guides & Reviews' section (https://docs.google.com/document/d/1uF5xCzg-8LqbiCwom5oKJWhIBnt7COsrCWytwYN5Yfk/edit/) that covers the options and install procedure.
 

nickdanger

Collector of Functional Art
@bizwaxzion thanks so much for the info and link! I was afraid to click on any of the "forum" postings when I didn't know what they were. I'll check out the link this afternoon.
 

Tomfool86

Active Member
Are you using the mesh? I had a hard time with it coming out onto the splash guard. Looking for some people with experience to give some much needed tips.
I've got crafty pads coming for my v3 to try the LAG setup as well. I ordered some more v3 donuts too for the testing. Im interested in hearing how you fare with the firefly pad. If that's a perfect fit, it would definitely make things easier.
 
I've got crafty pads coming for my v3 to try the LAG setup as well. I ordered some more v3 donuts too for the testing. Im interested in hearing how you fare with the firefly pad. If that's a perfect fit, it would definitely make things easier.

It goes straight in, it's a nearly perfect fit. I'm nervous about testing as it uses a ton of material and you can't really tell what's inside the pad. Please LMK how you do, I'd love some tips.
 
interruptingpirate,
  • Like
Reactions: tennisguru1

F-UCTD

Well-Known Member
Hi guys first post so I hope i'm doing it right. I'm keen to find out how this works with the firefely2 pads as i have extra some lying around. Is there any issues buying from Divine Tribe if you're an international customer? I've been reading a lot and am prepared to pull the trigger but I still wonder if I should get the sai instead, that said I'm a flavour chaser and i need to conserve wax as it is impossible to get over here atm. The firefly2 works really well for concentrates and is frugal but not the stealthiest. By the way my user name is related to my auto immune condition - undifferentiated connective tissue disease. So Fuck UCTD.
 

Vape Donkey 650

All vape, no smoke please.
Good ol' DT thread...it seems to go in bursts and spurts! Coming in a little late here...but

bizwaxzion is the new go-to-guy for helping the new out with settings and explaining how things work :nod::tup:

His recommended settings are more accurate and up-to-date than OF's, and he's much more concise than me in explaining it :D

Is there another 510 atomizer that the experts recommend that I can use for multiple hits?

Some options have been mentioned, but I'm surprised no one else seems to be aware of this?

@supershredderdan, a diligent new FC'er has used a DC Gen2 herb atomizer and some SS mesh pads with a different RDA top to make a complete, modded, high-capacity load n' go atomizer (not a tank)

Of course I mention it here because it's based on a DT product and it looks like it works, and is getting some good feedback?

This guy looks like he's getting nice clouds, but IDK if he's burning oil with his mod settings to achieve that? (probably not, just high-heat on a big glob of oil)

Those of you guys seriously considering modding V3's with SS mesh should take a closer look, Dan seems to have put alot of thought and effort into this modded atty, and is probably one of the better SS-mesh type high-capacity attys out there. With the much larger ceramic oven and space on the herb heater, this surely can outperform any V3 donut with a mesh pad. :2c:

nBMkMVO.jpg


YSUZnbB.jpg


But....

IMO It's not even worth hitting concentrate if you are looking for a design like this. You end up huffing on reclaim hits the whole time, it's counter productive. I understand the allure and have tried many other atomizers looking to do the same thing; I'm back to load as you go.

I largely agree, unless it's a well-designed tank. Even with a good tank, the rest of the oil that's in the tank but not directly on the atomizer coil or being vaped, will get partially, ambiently heated, but it doesn't have to degrade much or get reclaimed up if it's a quality concentrate run on a proper TC mod with moderate temps and a ceramic coil. For shatter, live resins, rosins, crumble, wax, etc on a high-capacity atty, I think it's counter-productive and almost delusional to think you can get dozens of hits on a single large load and expect the latter half to taste anywhere near as good as the first few puffs, so I don't try.

I'm fine loading a BB or two at a time. I still get somewhere between 8-12+ puffs on a 40-50mg load size. Maybe it's my moderate temps, or my "seasoned" donuts, or my shorter duration (8-12 sec. avg) puffs, or my willingness to puff down all those marginal reclaim hits after 3-4 tasty puffs from a fresh reload (always through water) that allows me to get many more puffs per load than some other guys?

(maybe some combo of those reasons?)

Medium donut, and using a tool to scrape up the semi-melt oil that gets around the sides and under the cup gets you more puffs per load, but is kinda annoying too :shrug:

What's the issue with SS?

Flavor. A ceramic plate would be better.

Yup, that's the main deterrent for me to try concentrate atty's with steel mesh as the medium. I've tried this with the volcano solid valve several times, and it makes for some great initial bag fills, but you're left with increasingly marginal, never-ending reclaim bags, and it seems wasteful. :mad: I feel I can vape a modest amount of concentrate much more effectively on a single, un-aided donut on the V3. Without a bag and with direct conduction and SS pads, I wouldn't expect great flavor, but I m a ceramic hard-liner too. :D

I'm not really using a portable vape atm. I think the V3 is the best tasting portable but it's not easy to work with when out and about. I've found I have to preload it when I leave the house and then finding a safe spot to reload isn't always easy.

I've gone back to smoking out of a sherlock and actually enjoy it.

I think a crucible cup would make the V3 work better. I just want a portable bucket that I can drop dabs in like a banger. Not interested in those portable enails (they all suck). I think the current V3 could work with a plate type atty if they make one. I just hate donuts. They don't cover the whole bottom. They taste great though.

I feel you with the pre-loading and the potential awkwardness of reloading the V3 in "field conditions" and I accept those limitations. Even a dry V3 on the road still feels like the best device for me to vape shatter without having to add PEG or terps to liquefy it. :rolleyes: Some guys like @Steven have taken DT field-loading to a fine art and science with fancy syringes, versatile dab tools, and lots of practice, but even guys like us have shifted over to high-performing tanks, to some extent.

I could reload and field-clean my V3s given space and time, and the will to do so, but tanks are much more easy to deal with. I still take V3s to friends houses' and day trips when I can pay it the proper attention, but tanks have been getting alot better in the past year and are so casual :cool:

Matt is still working on the crucible cup and some other good stuff for us, but not much solid info for us recently? This could be the ultimate portable concentrate atty for me if it is pulled off right, like a combo between the DTv3 and puffco+, somewhat? Delays and problems with his suppliers probably holding us back. :(

Matt posted this a month ago but most of you guys probably didn't see it? This is not a necessary indicator of what he may release next?:huh:

 
Last edited:

supershredderdan

Well-Known Member
Manufacturer
Good ol' DT thread...it seems to go in bursts and spurts! Coming in a little late here...but

bizwaxzion is the new go-to-guy for helping the new out with settings and explaining how things work :nod::tup:

His recommended settings are more accurate and up-to-date than OF's, and he's much more concise than me in explaining it :D



Some options have been mentioned, but I'm surprised no one else seems to be aware of this?

@supershredderdan, a diligent new FC'er has used a DC Gen2 herb atomizer and some SS mesh pads with a different RDA top to make a complete, modded, high-capacity load n' go atomizer (not a tank)

Of course I mention it here because it's based on a DT product and it looks like it works, and is getting some good feedback?

This guy looks like he's getting nice clouds, but IDK if he's burning oil with his mod settings to achieve that? (probably not, just high-heat on a big glob of oil)

Those of you guys seriously considering modding V3's with SS mesh should take a closer look, Dan seems to have put alot of thought and effort into this modded atty, and is probably one of the better SS-mesh type high-capacity attys out there. With the much larger ceramic oven and space on the herb heater, this surely can outperform any V3 donut with a mesh pad. :2c:

nBMkMVO.jpg


YSUZnbB.jpg


But....



I largely agree, unless it's a well-designed tank. Even with a good tank, the rest of the oil that's in the tank but not directly on the atomizer coil or being vaped, will get partially, ambiently heated, but it doesn't have to degrade much or get reclaimed up if it's a quality concentrate run on a proper TC mod with moderate temps and a ceramic coil. For shatter, live resins, rosins, crumble, wax, etc on a high-capacity atty, I think it's counter-productive and almost delusional to think you can get dozens of hits on a single large load and expect the latter half to taste anywhere near as good as the first few puffs, so I don't try.

I'm fine loading a BB or two at a time. I still get somewhere between 8-12+ puffs on a 40-50mg load size. Maybe it's my moderate temps, or my "seasoned" donuts, or my shorter duration (8-12 sec. avg) puffs, or my willingness to puff down all those marginal reclaim hits after 3-4 tasty puffs from a fresh reload (always through water) that allows me to get many more puffs per load than some other guys?

(maybe some combo of those reasons?)

Medium donut, and using a tool to scrape up the semi-melt oil that gets around the sides and under the cup gets you more puffs per load, but is kinda annoying too :shrug:





Yup, that's the main deterrent for me to try concentrate atty's with steel mesh as the medium. I've tried this with the volcano solid valve several times, and it makes for some great initial bag fills, but you're left with increasingly marginal, never-ending reclaim bags, and it seems wasteful. :mad: I feel I can vape a modest amount of concentrate much more effectively on a single, un-aided donut on the V3. Without a bag and with direct conduction and SS pads, I wouldn't expect great flavor, but I m a ceramic hard-liner too. :D



I feel you with the pre-loading and the potential awkwardness of reloading the V3 in "field conditions" and I accept those limitations. Even a dry V3 on the road still feels like the best device for me to vape shatter without having to add PEG or terps to liquefy it. :rolleyes: Some guys like @Steven have taken DT field-loading to a fine art and science with fancy syringes, versatile dab tools, and lots of practice, but even guys like us have shifted over to high-performing tanks, to some extent.

I could reload and field-clean my V3s given space and time, and the will to do so, but tanks are much more easy to deal with. I still take V3s to friends houses' and day trips when I can pay it the proper attention, but tanks have been getting alot better in the past year and are so casual :cool:

Matt is still working on the crucible cup and some other good stuff for us, but not much solid info for us recently? This could be the ultimate portable concentrate atty for me if it is pulled off right, like a combo between the DTv3 and puffco+, somewhat? Delays and problems with his suppliers probably holding us back. :(

Matt posted this a month ago but most of you guys probably didn't see it? This is not a necessary indicator of what he may release next?:huh:



Wuddup! Thanks for the info post, anyone looking for more info can come visit the Castle Cartridge thread in the DIY section (currently have a manufacturer account with FC so I need to keep any product talk on my threads). Thinking about doing a detailed video walkthrough of assembly and links to all materials to order, may also do a round 2 of premade units if i can gather enough people. Need enough people to all pay in advance so i can front bulk purchases of material.

I wanna say thanks to Matt for being helpful with the Castle project and giving me the greenlight to resell his parts as a different product, and always being super helpful and an all around rad dude.
 

F-UCTD

Well-Known Member
I haven't got my dtv3 yet - should be here in the next couple of days. Thanks Matt we worked it out eventually lol. My interest in the ss pads from the firefly is I literally paint a small amount on. I mean I use half a gram a month just microdosing. Whenever I see pictures here it looks like everyone is hitting a week's worth in a single session, which makes me nervous as I live in a state that hasn't got rosin for sale yet - even on the street level. Last bud I bought was so dry, far more suited to smoking not vaporising, let alone squishing with my hair straightener and quick grip to make the smallest ball of wax you guys would have ever seen. Anyway just letting you guys know I'm watching all these developments with interest and hoping that there will be products and attys developed that are also made for conserving wax and microdosing. I'm still keen to see if my firefly2 ss pads work but I have no clue about temps and settings yet, I'll be running it with a releaux 2/3 mod. By painting thin I get good taste but after multiple pulls on the firefly2 the taste degrades and you notice the reclaim, I imagine this will be the same on the dtv3, though I plan on using a brand new ss pad. Anyway keep up the good work cannapreneurs.
 

invertedisdead

PHASE3
Manufacturer
The v3 works great for microdoses just by painting onto the donut, but you should get some Boveda packs for humidity control to facilitate better rosin squishes. Dry flowers not only contaminate the rosin, but hold back potential yield as it needs moisture to extract well, especially when squishing with minimal PSI.
 

HSIHP

Well-Known Member
Anyone know the average shipping time for these? Finally ordered the Gen 2 after wanting it for god knows how long and hopefully it gets here before a festival next week!
 
HSIHP,

aka DaBigKahuna

Well-Known Member
Anyone know the average shipping time for these? Finally ordered the Gen 2 after wanting it for god knows how long and hopefully it gets here before a festival next week!

Multiple orders here and Matt and team, if more than one.

Ship the next day every time and I receive in two days however I'm one state over.

I can't recall if there is a upgrade shipping option.

Rest assured this is in the shipping time frames for the class of shipping service.

Plus you can't wait to take it for a whirl. Admit it. ;)
 

grokit

well-worn member
I've been doing this lately, it helps a lot with the splatter if you want to try bigger loads with the v2. Elb caps are too big to fit, but this @DDave micro-mod bowl that's been re-purposed is perfect. Anyways I'm diggin' it, I can lean a bit harder on the throttle with a lot less clean up afterwards. Of course there's a bit more waste and some flavor sacrifice doing it this way compared to micro-loading, but it's tres' convenient.

pfp0aGD.jpg

:science:
 

mrbonsai420

Accessory Maker
Accessory Maker
My vape pen went MIA, about to get another DT3.0 and a new battery mod. Old one was a VTC V2 mini. Should I go with the eVic Primo Mini now? Does anyone have a link to the best price for the best mod?
 

invertedisdead

PHASE3
Manufacturer
My Evic Basic is still my favorite, but I like my Primo Mini too. Primo is more comfortable to use but Evic Basic is so small, with Arctic Fox software it's really hard to beat.
 

elmoe420

Well-Known Member
My vape pen went MIA, about to get another DT3.0 and a new battery mod. Old one was a VTC V2 mini. Should I go with the eVic Primo Mini now? Does anyone have a link to the best price for the best mod?

Primo Mini does not have a vented/slotted 510 connector. This means it cannot supply airflow to traditional bottom airflow carts (like many prefills or the W9 Trinity for example). This doesn't matter for the DT v3 but just wanted to call it out in case you care. I bought a 510 vented extender to deal with it but this is another part you'll have to source.

It also has a hinged door on the bottom rather than a magnetic cover for the battery compartment. Still holding strong for me but these hinges can be a weak point long term in my experience.

The only plus over the VTC Mini is the ergonomics of the design really. The rounded corners make it feel really nice in your hand.

Otherwise I actually think the older models are better for the reasons stated above.
 
elmoe420,

jtrue

New Member
I've read through most of thread and haven't been able to find a definitive answer. Anyone have a water pipe setup and adapter they are using with the DC v2 dry herb atty? I have a Poseidon bubbler for my Saionara, but not sure it will fit the v2 dry herb atty. Would love to see some pics and list of the adapters and sizes folks are using. Open to spending whatever for the right setup.
 

snackmaster

Well-Known Member
I've read through most of thread and haven't been able to find a definitive answer. Anyone have a water pipe setup and adapter they are using with the DC v2 dry herb atty? I have a Poseidon bubbler for my Saionara, but not sure it will fit the v2 dry herb atty. Would love to see some pics and list of the adapters and sizes folks are using. Open to spending whatever for the right setup.

Might try asking on reddit: https://www.reddit.com/r/Waxpen/

Mouthpiece on that is kinda square, right? Maybe this would help: https://delta3dstudios.com/indica-vaporizer-18mm-waterpipe-adapter/
 

Other Side

Retailer
Retailer

F-UCTD

Well-Known Member
Well I'm kind of bummed, it looks like usps lost my atomizer that my wife bought for my birthday. Worse still i'm sitting here with psoriasis on both my arms and imflammatory arthritis in my elbow and both my wrists. At least Matt refunded my money and he was good enough to honour the fc discount. But the whole experience has been kind of shitty and he could have replied to my last email, even accounting for the time difference between our two countries. This is why I hate buying stuff from America. Now where am I meant to purchase a dtv3 from? Not a fan of having to wait a month for something that may or may not turn up. I wish I had just bought the Saionara instead.
 
F-UCTD,
Top Bottom