Multi-brand Vivant Alternate

Stinky

Well-Known Member
Hello @mash If I am not mistaken, I believe we may have already helped you via e-mail. If i am mistaken please let me know so i can help you, or you can e-mail us at support@vivant.com





@OyVape If you are still having issues with your V3 top cap please e-mail us at support@vivant.com for more information on how to properly assemble/disassemble the new V3 top caps.



Hello @Stinky , I am sorry there is so much confusion about this issue. Here is a link to our Authorized Reseller's: https://vivant.store/community/store-locator it has been on our website for a while and we keep it up to date so you guys can always check to see whom is on the list and being honest.

Just to clarify, I remember speaking with you through DM here about your situation with Heaven's Gift and the top cap. Recalling on our last message, you were able to obtain a V3 Top Cap. Please let me know if your situation was not taken care of so we can do our best to help you.

I ended up buying a V3 mouthpiece for $12US all up including shipping from Heaven Gifts. To buy one from you would have cost $42US in shipping alone.
 
Stinky,
  • Like
Reactions: BigJr48

youed

Well-Known Member
Hello @mash If I am not mistaken, I believe we may have already helped you via e-mail. If i am mistaken please let me know so i can help you, or you can e-mail us at support@vivant.com





@OyVape If you are still having issues with your V3 top cap please e-mail us at support@vivant.com for more information on how to properly assemble/disassemble the new V3 top caps.



Hello @Stinky , I am sorry there is so much confusion about this issue. Here is a link to our Authorized Reseller's: https://vivant.store/community/store-locator it has been on our website for a while and we keep it up to date so you guys can always check to see whom is on the list and being honest.

Just to clarify, I remember speaking with you through DM here about your situation with Heaven's Gift and the top cap. Recalling on our last message, you were able to obtain a V3 Top Cap. Please let me know if your situation was not taken care of so we can do our best to help you.
Vaporrange is apparently a certified retailer yet I still didn't get a v3 cap with my order. Do I have to purchase one separately now?
 

Cheesequake

Free Men Don't Ask
Mine just came in from vaporrange. I think they provided a v1 and v2 cap, as there isnt that large metal piece on the inside of the mouthpiece.
That sucks. Here was the message I sent to and received from them.

8j45GqG.jpg
 

djchexxx

Well-Known Member
Vaporrange is apparently a certified retailer yet I still didn't get a v3 cap with my order. Do I have to purchase one separately now?
No, send them an email and let them know you need a V3 top cap. I did this and they sent mine out right away.
 
djchexxx,
  • Like
Reactions: BigJr48

Vivant

Well-Known Member
Manufacturer
Vaporrange is apparently a certified retailer yet I still didn't get a v3 cap with my order. Do I have to purchase one separately now?

This company needs to step their game up when it comes to construction.

Although the actual device produces great vapor for the price point, so I'm torn...

That sucks. Here was the message I sent to and received from them.

8j45GqG.jpg

Definitely not your fault mate.

I can't really be mad at them, they probably have no idea about the difference between the caps, and just assumed the caps they had were the latest.

No, send them an email and let them know you need a V3 top cap. I did this and they sent mine out right away.



Hello @youed @Cheesequake

Vapor Range is our Authorized Reseller. They do not have the new V3 top caps yet. Our manufacturer in China has been delayed in producing the full amount of top caps required for each Alternate out there. Therefore, the first couple shipments we got of the V3 Top Caps were issued to the customer directly as priority. We are now almost caught up with V3 replacements and upon our next delivery of top caps next week, we will have them issued to Vapor Range.

In the meantime, we will go ahead and make ourselves available to help all customers who purchased from an authorized re-seller of ours and who received an older/previous version. Please be advised that we may ask for proof of purchase or an order receipt/confirmation.


@smokinjetson

Thank you for your constructive criticism. We are doing our best to ensure the build on our products is acceptable on all standards. Rest assured we are running more and more tests before and after product release dates to ensure we have consistent quality throughout the whole manufacturing process.

If you have any questions, comments or if you need to make an inquiry about your Alternate device you can e-mail us at any time at info@vivant.com or support@vivant.com

Thank you for you honest and direct feedback,



@Stinky

We are sorry to hear we could not help you in those regards. Since we were unable to obtain an address to quote you the shipping rate, we had to quote based off a public facility in your area. Unfortunately, we cannot control the shipping rates as this is issued to us by each shipping carrier directly. However, we do hear that shipping charges can be cheaper from China depending on the destination country.
 
Vivant,

BigJr48

Well-Known Member
Well my replacement Alternate that I've used less than 15 times has now developed cracks in the same spot as my old one. I've used only the official v3 mouthpiece and been EXTREMELY careful. This is ridiculous.

fnmG0sh.jpg

At what temps you vape at? I'm just asking as a preventative measure. I don't understand what's wrong with the Alternate, your unit is like new.
 

Cheesequake

Free Men Don't Ask
Has anyone had these micro cracks actually affect performance, or is it all basically cosmetic. If it is there is still no excuse for it to be happening, but I'd be a lot less worried if it were.
Seems to just be cosmetic. Someone else reported it affected air flow but I haven't experienced that yet on either unit.
 
Cheesequake,
  • Like
Reactions: youed

youed

Well-Known Member
For anyone that needs a new top cap, the process is incredibly easy, and Ivan responds very quickly! Now i just might need to make a WPA out of one of these extra caps
 
youed,
  • Like
Reactions: BigJr48

Maryanna

Well-Known Member
My V2 cooling unit is doing a good job and it did not crack even though it still gets really hot sometimes.
And I also adapted the Crafty cooling unit.
I'd like to try this new V3 CU but I don't know if it would be better to buy the glass mouthpiece for the Crafty unit... They say glass improves flavor and quality a lot.
What would you recommend?
 
Maryanna,
  • Like
Reactions: BigJr48

Occipital

New Member
Quick questions:

Would the crafty top be better for the vivant than its current v3 top?

Do they now have a capsule system like S&B?

Will the ez-load bowl mod for the CF/CFX work on the vivant?

Sorry about all these questions. I'm planning on either getting the alternate or a firewood 4/5, so I need a few questions answered. I'm currently leaning towards the firewood but if you guys can convince me to get the alternate then I'll buy it.
 
Occipital,
  • Like
Reactions: BigJr48

Cheesequake

Free Men Don't Ask
Would the crafty top be better for the vivant than its current v3 top?
I prefer the v3 cap since it matches and you don't have to modify anything. As long as it doesn't crack I'd recommend that.

Will the ez-load bowl mod for the CF/CFX work on the vivant?
I doubt it but the Alternate comes with its own loading tool that works really well.
 
Cheesequake,
  • Like
Reactions: BigJr48

sickmanfraud

Well-Known Member
Quick questions:

Would the crafty top be better for the vivant than its current v3 top?

Do they now have a capsule system like S&B?

Will the ez-load bowl mod for the CF/CFX work on the vivant?

Sorry about all these questions. I'm planning on either getting the alternate or a firewood 4/5, so I need a few questions answered. I'm currently leaning towards the firewood but if you guys can convince me to get the alternate then I'll buy it.

not even close get the Firewood 4/5 and never look back.
 

youed

Well-Known Member
Quick questions:

Would the crafty top be better for the vivant than its current v3 top?

Do they now have a capsule system like S&B?

Will the ez-load bowl mod for the CF/CFX work on the vivant?

Sorry about all these questions. I'm planning on either getting the alternate or a firewood 4/5, so I need a few questions answered. I'm currently leaning towards the firewood but if you guys can convince me to get the alternate then I'll buy it.
I would get the Alternate if you don't want to worry about technique, or if you're ever going to use it in groups. I loved my firewood but it was impossible to try to teach people how to use it.
 
youed,
  • Like
Reactions: BigJr48

Maryanna

Well-Known Member
In my opinion the only negative sides of this amazing vape is that it does not support dosing capsules and that we cannot change the plastic mouthpiece with a glass one.
Otherwise it would be perfect!
 
Maryanna,
  • Like
Reactions: BigJr48
In my opinion the only negative sides of this amazing vape is that it does not support dosing capsules and that we cannot change the plastic mouthpiece with a glass one.
Otherwise it would be perfect!
Somebody made a mod mouthpiece with glass for their alternate. Might be posted in this thread several pages in. If you do some searching you might be able to find it.
 
smokinjetson,
  • Like
Reactions: BigJr48

Occipital

New Member
I would get the Alternate if you don't want to worry about technique, or if you're ever going to use it in groups. I loved my firewood but it was impossible to try to teach people how to use it.

How so? I would think that the Firewood 4 is pretty foolproof with technique, long slow draw like most other vapes.

Can you rip on the alternate though?
 
Occipital,
  • Like
Reactions: BigJr48
Top Bottom