Dynavap VapCap
- Thread starter Fenton Mewley
- Start date
The portside is portable, comes in its own eclosure. The skeletor is portable, you provide the enclosure. Each takes (3) 18650 batteries.This jarhead wishes @Pipes has a more portable version,
for those times when one is out, and about.
Outside. On the fly.![:\](/i/s/hmm.gif "Hmm :\")
SloJimFizz
Unknown Member
I am double pleased now.
Just got the pm from @Pipes that my skelator is ready.
My celebratory dry humping the air dance was not well received by the Fam.
Summer
Long Island, NY
This jarhead wishes @Pipes has a more portable version,
for those times when one is out, and about.
Outside. On the fly.
stark, @Pipes just posted that he is tinkering around with the possibility of a PSmini. Here's his post:
http://fuckcombustion.com/threads/v...top-and-in-car-use.23211/page-44#post-1160228
Zecrono
Ravioli Ravioli Give Me The Formuoli
Probably my first/last post before Irma knocks out the power. Been perusing the thread for a little while, figured I'd stop in and say hello 
Got a blackwood Ti-Woody a few months ago and love it, replaced a Mighty for me.
Currently on @Pipes Skeletor list (already looking at containers too).
Dynavap really outdid themselves on this one! Definitely going to get a vong body and an Omni XL in the future.
@Dynavap, are you guys planning on making that new nonavong body a stem as well?
Got a blackwood Ti-Woody a few months ago and love it, replaced a Mighty for me.
Currently on @Pipes Skeletor list (already looking at containers too).
Dynavap really outdid themselves on this one! Definitely going to get a vong body and an Omni XL in the future.
@Dynavap, are you guys planning on making that new nonavong body a stem as well?
Gigsabits53
Well-Known Member
Probably my first/last post before Irma knocks out the power. Been perusing the thread for a little while, figured I'd stop in and say hello
Got a blackwood Ti-Woody a few months ago and love it, replaced a Mighty for me.
Currently on @Pipes Skeletor list (already looking at containers too).
Dynavap really outdid themselves on this one! Definitely going to get a vong body and an Omni XL in the future.
@Dynavap, are you guys planning on making that new nonavong body a stem as well?
Beautiful VC!! Welcome to the forums!
kushkush
happy camper....
Got a blackwood Ti-Woody a few months ago and love it, replaced a Mighty for me.
Your Ti-Woody replaced your Mighty....now that's saying something!
fågel
᚛ᚓᚐᚅ᚜
fatigue has made it impossible to check in for ages now but since i just broke the body of my og i must.. though i'll start at the beginning. (also my goodness, this thread has really exploded! hello 
)
i really liked my M at first, i think i got it in april or may or something. after a while though i noticed that 1) the time it took to heat it was longer than the 10 seconds the portable torches recommend being on for (which may have lead to like 0 of my torches working & often burning myself on the hot metal of the torch) and 2) the top of the bowl would never ever get cooked.
so of course when i noticed #2 i looked closer & noticed that the screen seems like. way too small. consequently it doesnt stay in place and just falls into the bottom of the chamber, below the groove where it seems like it should belong..
i really need to be able to use my portables again (im mostly a sativa person and so the cooler results of the M work best for daytime) so i just inspected my OG & yeah, the screens fit a lot tighter and actually stay in the right spot (mostly. i cannot for the life of me get those little feckers to stay level.). and of course, while fucking with screen, the crack my OG body came with finally gave in and now there's a hole
to summarise:
please help me with the M. the screen just falls down into the chamber & it seems too small/chamber too big for it to stay in place right.
also oh god, can i still replace the body for my OG
)i really liked my M at first, i think i got it in april or may or something. after a while though i noticed that 1) the time it took to heat it was longer than the 10 seconds the portable torches recommend being on for (which may have lead to like 0 of my torches working & often burning myself on the hot metal of the torch) and 2) the top of the bowl would never ever get cooked.
so of course when i noticed #2 i looked closer & noticed that the screen seems like. way too small. consequently it doesnt stay in place and just falls into the bottom of the chamber, below the groove where it seems like it should belong..
i really need to be able to use my portables again (im mostly a sativa person and so the cooler results of the M work best for daytime) so i just inspected my OG & yeah, the screens fit a lot tighter and actually stay in the right spot (mostly. i cannot for the life of me get those little feckers to stay level.). and of course, while fucking with screen, the crack my OG body came with finally gave in and now there's a hole
to summarise:
please help me with the M. the screen just falls down into the chamber & it seems too small/chamber too big for it to stay in place right.
also oh god, can i still replace the body for my OG
Havnt tried vaponic I rate the VC above the vapman for hash only because the simple heating and easier to load without crumbling the hash. Vapman is great with easily crumbled hash though
Last edited:
Summer
Long Island, NY
@fågel, I don't know if you can still buy the OG body, but I do know that puffitup.com carries 2 glass models. If it's just the glass, maybe some other members know where to purchase, otherwise, you can contact dynavap to see if they have any available.
Dynavap has the glass inner tubes (@ least that's what George told me they were) in stock:
https://www.dynavap.com/dynashop/parts/standard-vapcap-condenser-twin-pack
fagel, you need an induction heater for your M. You won't ever need to use torches again. It'll make using the M a breeze & a pleasure. HERE for thread & FAQ
As far as your screen, try pressing it in the bowl with the cap end of a bic pen. See what I mean here at 1:23:
https://www.youtube.com/watch?time_continue=110&v=KGvg9zUdlY4
Dynavap has the glass inner tubes (@ least that's what George told me they were) in stock:
https://www.dynavap.com/dynashop/parts/standard-vapcap-condenser-twin-pack
fagel, you need an induction heater for your M. You won't ever need to use torches again. It'll make using the M a breeze & a pleasure. HERE for thread & FAQ
As far as your screen, try pressing it in the bowl with the cap end of a bic pen. See what I mean here at 1:23:
https://www.youtube.com/watch?time_continue=110&v=KGvg9zUdlY4
Zecrono
Ravioli Ravioli Give Me The Formuoli
Thanks Gigs!Beautiful VC!! Welcome to the forums!
Your Ti-Woody replaced your Mighty....now that's saying something!
You're absolutely right! The Mighty packs a huge punch... Too much punch for me. It doesn't take a lot to get me to where I need to be (half a Dynavap bowl, if that). The heat up time and size of the oven made the Mighty hard to microdose, even with the pad or dosing capsules. On demand heating in seconds, easy microdosing, and a complete lack of plastic really pushed me over the edge to get a Woody
Also the power went out a few hours ago, so I'm posting from my phone. The eye just passed over us. All is well, thank goodness
Last edited by a moderator:
fågel
᚛ᚓᚐᚅ᚜
@Summer thanks! it's good to know about puffitup. and oh my gosh!! i wish i could bend the rules of time and money to have one of those induction heaters in my hands now...
i might experiment with thick hemp wick for a torchless/electricity/battery free method. i've used exclusively candles in the past with the og & so a bigger wick with a bigger flame might work with the M..?
frick a pen like so sounds perfect. ive been using the skinny dowel that came with my underdog replacement screens which is narrower and is probably making the job more difficult.
thank you!
i might experiment with thick hemp wick for a torchless/electricity/battery free method. i've used exclusively candles in the past with the og & so a bigger wick with a bigger flame might work with the M..?
frick a pen like so sounds perfect. ive been using the skinny dowel that came with my underdog replacement screens which is narrower and is probably making the job more difficult.
thank you!
SloJimFizz
Unknown Member
Same here. Power went out sooner than expected. Got a bit scary for awhile.
Just steady wind with gusts around 85 now.
Did get to try lighting my omni with a tea candle though. Kinda like sunflower seeds, tastes good but a lot of work to get there.
duff
Well worn
Video please!My celebratory dry humping the air dance was not well received by the Fam.
SloJimFizz
Unknown Member
Right smack dab in the middle of the phallic state.Whew! Good that you have your trusty flash light!
, James!
POW-er is out in KC? Irma's reach is felt already?
Caution: Jose projected to hit lung island/nyc......
Need a toke
Only getting lightly pummeled now.
pxl_jockey
Just a dude
@SloJimFizz - Congrats on the skelator, I've had an idea or 2 for skelator skins so I'm excited to see what you do. Or do you plan to leave it au natural? Did your family enquire why you broke out in dance? I find that when Mrs pj ask why/what I'm laughing, excited, or looking at and it's FC-related; she tends to pull out her patronising smile. Like she's glad I'm playing with my friends, but finds it all a bit silly. Sometimes I get the eye-roll! 
VC Update: The M and I had our first meaningful, productive conversation today.
Not sure why but it all just clicked. Saturday I realised to only put in tiny amounts while practicing because it reached out and smacked me and left me too battered to continue. So happy I made progress and now can perfect my experience. Funny thing: as soon as I get the lighter down, my brain immediately said "Skelator". *sigh*
Third cheapo lighter is the best, but I also ordered a better one from amazon & found good butane to be much cheaper on ebay. Feels like I'm hooked, thanks to you Jim and everyone! I feel honoured that you guys saved me a spot here, cheers!
VC Update: The M and I had our first meaningful, productive conversation today.
Not sure why but it all just clicked. Saturday I realised to only put in tiny amounts while practicing because it reached out and smacked me and left me too battered to continue. So happy I made progress and now can perfect my experience. Funny thing: as soon as I get the lighter down, my brain immediately said "Skelator". *sigh*Third cheapo lighter is the best, but I also ordered a better one from amazon & found good butane to be much cheaper on ebay. Feels like I'm hooked, thanks to you Jim and everyone! I feel honoured that you guys saved me a spot here, cheers!
VisiblyVaped
Well-Known Member
The OG hits like a fuckin champ. And man that glass path......
It's an old school Omni, so any tips??
Does the airflow adjust just like the new body ones??
Any mods??
Either way I got a STEAL of a deal, with just a trade of something I don't use thrown in.
Just need Dynastash
It's an old school Omni, so any tips??
Does the airflow adjust just like the new body ones??
Any mods??
Either way I got a STEAL of a deal, with just a trade of something I don't use thrown in.
Just need Dynastash
VisiblyVaped
Well-Known Member
Already done. The OG glass is nice, I'm intrigued by my og Omni
nickdanger
Collector of Functional Art
I use my OG a lot in rotation, and completely forgot I have a glass body for my Omni. I'll have to dig that out next time I'm changing things around. I've been using it with one of the @phattpiggie twists lately.
