• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

RBT Milaana stems by cannabis.pro

cannabis.pro

aka 420EDC
Accessory Maker
Another generous member had one he wasn't using and offered to send it to me so I could try it. I remember when you first released them there was an useage option without the tophat, which was what I had been looking for ever since beta testing Zion, something more like the Solo stems with fixed glass screen and no need for mesh, though the bowl here is huge

The tophats didn't interest me as much bc of having the separate parts, but I guess they are pretty necessary after all bc they offer small holes, screen closer to the heater, and narrower as well? But then the tophat doesn't need the internal glass screen in the stem does it? I can lock into one of the stems without internal screen right? That seems like it's be better with less glass mass to rob heat perhaps? I know I still need to try it...

I've only gotten to try the GonG a couple times, couldn't get any mesh basket screen in there to get load closer to heater as I like, so that has made thing trickier. I had tried a whole nug, but it didn't work too well bc it needed to be broken up to further extract more than a taste, and then it was bit city in my mouth lol
Yeah, if using the joint without a TopHat, it creates a huge bowl.

There are stems we sell without the screen installed, it has a taper to keep the TopHat from pulling through.

I'm finding the best setup is to not grind with the TopHats or break things up later. The Tubo and my newer Milaana have enough heat power to extract pretty darn goodly to not have to break anything up and not have wasted anything other than yourself. Pardon my english.
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Yeah, if using the joint without a TopHat, it creates a huge bowl.

There are stems we sell without the screen installed, it has a taper to keep the TopHat from pulling through.

I'm finding the best setup is to not grind with the TopHats or break things up later. The Tubo and my newer Milaana have enough heat power to extract pretty darn goodly to not have to break anything up and not have wasted anything other than yourself. Pardon my english.

Haha yeah, can I see what size/shape you are using maybe? I can't seem to avoid a hot spot and always have to break it down to continue eventually. Even a small nug doesn't seem like it'd work too well bc of the large screen holes? Or do you only use the top hats really? They also dont seem thaaat small, but what do I know lol
 

virtualpurple

Well-Known Member
I bought these stems and tophats shortly after they were introduced. I didn't have as good of results as many have and have just gotten too many bits of flower in my mouth or water pieces.

I love the idea, but it just didn't work well for me, I have just ended up trying to fit some dome screens into the EDC stems to make them useable for me.

I could see them working with just whole or larger torn nugs, but I just had too many issues with the fit and the perforation sizes.
 

cannabis.pro

aka 420EDC
Accessory Maker
I bought these stems and tophats shortly after they were introduced. I didn't have as good of results as many have and have just gotten too many bits of flower in my mouth or water pieces.

I love the idea, but it just didn't work well for me, I have just ended up trying to fit some dome screens into the EDC stems to make them useable for me.

I could see them working with just whole or larger torn nugs, but I just had too many issues with the fit and the perforation sizes.
The TopHat and screened stems have holes that will allow finely ground material to pass through. Abandoning the grinder altogether and using a device like the Tubo Evic yields the extraction we like and really makes this glassware shine. Have you tried the glass with your Tubo Evic without grinding?
 

virtualpurple

Well-Known Member
The TopHat and screened stems have holes that will allow finely ground material to pass through. Abandoning the grinder altogether and using a device like the Tubo Evic yields the extraction we like and really makes this glassware shine. Have you tried the glass with your Tubo Evic without grinding?

I have not. If I can find the tophats again I wouldn't mind giving it a shot.

I do unground nugs fairly often with the tubo. Sometimes I'll crumble afterward for some huge sense hits, but I've found that the tubo can extract super thorough without needing any crumbling

Do you ever run your unground in the EDC stems without the tophat? I'm curious to know if it requires extra juice.
 

cannabis.pro

aka 420EDC
Accessory Maker
Do you ever run your unground in the EDC stems without the tophat? I'm curious to know if it requires extra juice.
Have not tried this. Might be able to get that to work with the Tubo, it's just such a large space to fill. Trying to use less instead of more most days. Feel free to provide some feedback if you get around to doing that sooner than us!
 

StormyPinkness

Rhymenocerous ʕ•ᴥ•ʔ
With the top hats I don't need to stir or crumble if I'm doing hand tearing. The screened stems have much bigger bowls and I'm pretty sure I always stir in those. I don't do my usual routine of hand crumbling since some of it will come through the screen, but with the tubo I don't really need to.
 

StormyPinkness

Rhymenocerous ʕ•ᴥ•ʔ
Ordering a screenless medium and tophat for it now.

@cannabis.pro I was curious what the difference is between these two options:
18mmMale:Screen:14mmMale
18mmMale:ScreenTaper:14mmMale
 
StormyPinkness,
  • Like
Reactions: flotntoke

cannabis.pro

aka 420EDC
Accessory Maker
Ordering a screenless medium and tophat for it now.

@cannabis.pro I was curious what the difference is between these two options:
18mmMale:Screen:14mmMale
18mmMale:ScreenTaper:14mmMale
That is a typo (thank you for finding it). It should be 18mmMale:Taper:14mmMale

It will work with the TopHat. There isn't a screen in there between the joints. Just an indentation to seat the TopHat.
 
Last edited:

StormyPinkness

Rhymenocerous ʕ•ᴥ•ʔ
That is a typo (thank you for finding it). It should be 18mmMale:Taper:14mmMale

It will work with the TopHat. There isn't a screen in there between the joints. Just an indentation to seat the TopHat.
Oh the tophat version of it... getting that too.
 
StormyPinkness,

cannabis.pro

aka 420EDC
Accessory Maker
Sorry for the double post. Our glass is restocked. New 45˚ medium+ in screened and slim variants. Some plain joints available in 67mm & 100mm length, not sure if the new RBT Stainless Steel TopHat will work with it, but should know shortly. New GonGs available too, 19mm:Constriction:19mm and 19mm:Constriction:14mm, again, new screens from RBT will be tested on these too. Otherwise for screens with our plain stems, its on you.
 

StormyPinkness

Rhymenocerous ʕ•ᴥ•ʔ
Sorry for the double post. Our glass is restocked. New 45˚ medium+ in screened and slim variants. Some plain joints available in 67mm & 100mm length, not sure if the new RBT Stainless Steel TopHat will work with it, but should know shortly. New GonGs available too, 19mm:Constriction:19mm and 19mm:Constriction:14mm, again, new screens from RBT will be tested on these too. Otherwise for screens with our plain stems, its on you.
This might be a dumb question, but what are the 45 degree ones? As in they are shaped 45 degrees like one of these?
2gt6a7q.jpg
 
StormyPinkness,

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
That's a 90˚, not quite as sharp of an angle, literally half that. I'll get pics up this weekend and revise the product page. Likely Sunday. Surfs up

Yeah so it's available with a GonG tip for water use, along with a regular glass screen, and a regular without glass screen? Does a tophat come with any? I may want the plain 45 and hopefully I can find screens to fit, but would be nice to try a tophat finally (in my GonG too!)
 

cannabis.pro

aka 420EDC
Accessory Maker
Yeah so it's available with a GonG tip for water use, along with a regular glass screen, and a regular without glass screen? Does a tophat come with any? I may want the plain 45 and hopefully I can find screens to fit, but would be nice to try a tophat finally (in my GonG too!)
We made two of the 45˚ minus screen or taper. One is up for sale and I don't see making any more in the near future as the RBT SS Tophats didn't fit (fell right out) the joint. We have GonGs in 14:19 and 19:19 with a screen or with a Taper. Tophats are their own beast and do not come with any of the other glass. TopHats aren't compatible with the plain 420EDC stems, they only work with the Screened Stems and Slim (tapered) stems or either of the two GonGs variants whether screened or tapered.

Until we come up with a stainless steel screen option, we'll either discontinue the Plain variant of stems or we may try a domestic glass source for that particular variant over Schott which keeps that inside diameter wide enough for TopHats to slide in and out easily.
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
We made two of the 45˚ minus screen or taper. One is up for sale and I don't see making any more in the near future as the RBT SS Tophats didn't fit (fell right out) the joint. We have GonGs in 14:19 and 19:19 with a screen or with a Taper. Tophats are their own beast and do not come with any of the other glass. TopHats aren't compatible with the plain 420EDC stems, they only work with the Screened Stems and Slim (tapered) stems or either of the two GonGs variants whether screened or tapered.

Until we come up with a stainless steel screen option, we'll either discontinue the Plain variant of stems or we may try a domestic glass source for that particular variant over Schott which keeps that inside diameter wide enough for TopHats to slide in and out easily.

Ah I didn't realize tapered meant the notch for the tophat, though the plain glass stems always had that. Alright so what about a standard RBT screen then? Is the inner diameter too wide for one of those too? I have plenty in varying sizes so maybe I can find one that fits... Would love to have a bent stem with a screen like this as I do with my RBT glass stems... Maybe I'll just try a tophat with my glass screened 420edc GonG too... Gonna PM you
 

cannabis.pro

aka 420EDC
Accessory Maker
20170913_131632_001.jpg

420EDC TopHat Bullet Subchamber

20170913_132143.jpg

Short and Medium Screened Stems
20170913_171535.jpg

A better look inside the screened stem
20170913_171636.jpg

Slim Short and Medium Stems
20170913_171609.jpg

Medium+ 45˚ Slim and Screened Stem
20170913_171713.jpg

19:Screen:19 19:Taper:19 19:Screen:14 19:Taper:14
20170913_171743.jpg

Plain Stems (not designed for use with 420EDC TopHats)((Everything else listed above is))
******************************************************
Finally got around to updating the Glassware and Woodcare page at 420EDC to better break out the different variants and simplify ordering for new and existing customers.
 
Last edited:

virtualpurple

Well-Known Member
@cannabis.pro do the slim stems hold a RBT screen fairly secure? I did not have a ton of luck with the screened stems but I really like the aesthetics of the slim stems, especially those angled ones!

VP
 
virtualpurple,

cannabis.pro

aka 420EDC
Accessory Maker
@cannabis.pro do the slim stems hold a RBT screen fairly secure? I did not have a ton of luck with the screened stems but I really like the aesthetics of the slim stems, especially those angled ones!

VP
Thanks for the interest. Are you using unground material with the Screened Stem?

The slim stems will not hold an RBT screen. See the post above from me discussing the plain stems, it is still the same joint, so I am yet to find a compatible stainless steel screen. These stems (slim and screened) are designed to be used with the 420EDC TopHat Bullet SubChamber which is why we decided on such a large inner diameter joint.
 

virtualpurple

Well-Known Member
Thanks for the interest. Are you using unground material with the Screened Stem?

The slim stems will not hold an RBT screen. See the post above from me discussing the plain stems, it is still the same joint, so I am yet to find a compatible stainless steel screen. These stems (slim and screened) are designed to be used with the 420EDC TopHat Bullet SubChamber which is why we decided on such a large inner diameter joint.

I have used both very coarsest ground (the lift grinders large grind disc for those familiar) and unground herb, but my results were spotty and while i believe the herb cooked evenly I didn't have many sessions where I didn't get bits in my mouth. This includes with herb stored in a jar with boveda packs. It may have been that I just got the wrong combo of bullets that do not fit or that the one that did had some variance with the screen size, I'm not sure. But it seems like most everyone that owns them enjoys them so I think it could have just been an unlucky combo for me.

I also want to put out to everyone that @cannabis.pro was very responsive to the issue when I first mentioned via pm and immediately offered to replace or refund, but I did not have follow-through. Top-notch customer service and I plan to purchase from in the future!
 
Top Bottom