Divine Castle Oil Cartridge- High Capacity Wax Tank & Herb Vaporizer Atty for Box Mods

supershredderdan

Well-Known Member
Manufacturer
Hey everyone, over the last week or so a few redditors and I conducted a bunch of experiments with mesh concentrate pads (mostly S&B crafty pads) in ceramic donut concentrate atomizers for loading a larger amount and getting multiple hits between reloads. After many tests I found that the best high capacity "Load and Go" set up was a Divine Tribe DC gen 2 dry herb atty with crafty pad mesh. The top piece of the dc gen 2 was less than optimal because of the perforated screen that presses down into the bowl. I found that the castle RDA was a perfect fit for the base of the DC and also is the perfect height for a buffer crafty pad to keep everything compressed onto the oven and prevent splatter.

I'm selling fully assembled units for $45, if you dont feel like making one yourself.

nBMkMVO.jpg



DIVINE CASTLE OIL CARTRIDGE - "CASTLE CARTRIDGE" for short

FEATURES:

-Holds up to .7 g of concentrate. Tested mostly with pull to snap shatter

-Full temperature control, keeps hits tasting fresh and allows anything from light microdoses to large rig sized hits

-4 airflow settings for customizing ratio of vapor/outside air. Personally I like setting it to 1 medium hole and using it as a carb while riding the button

-Interchangeable 510 drip tips. Each unit will come with a metal drip tip and a glass drip tip. Currently investigating ways to make a 510 driptip that is a male joint for connecting to water pipes. You can install a long drip tip for higher temp hits for cooler vapor

-Microdose dry herb (.05-.1) with single mesh installed or remove both meshes to use dc gen 2 with dry herb as intended (full pack is about .25)

-No noticeable leaks after 3 grams of tests, absolutely 0 reclaim on build deck or base of herb pod.

-No need for cooldown hits. All the percs of the Hercules without the 1-3 minutes of cooldown hits.

-Easy to load. Recently I've enjoyed taking a glob and squishing it on the bottom of the top mesh, then lightly press the pad into the oven dab facing the bottom mesh, then I'll heat to about 300 and wait a few seconds then fully press the tip pad so it is nearly flush with the top of the ceramic base. This way you can load and soak in large amounts of product without having most of it pooling at the top of the mesh, resulting in faster vaporization and nearly eliminates splatter.

-Group friendly. once preheated to temperature it can be passed around and ripped while riding the power button, no pulsing or draw speed technique required

Build and size comparisons:

https://imgur.com/a/Atqcn



I am getting 15-25 hits off a load. Single pad holds about .3 but with both pads it's more like .5-.7

$45 plus shipping for the unit, glass drip tip, heat sink, plus all other parts of both atomizers (castle build deck, original top for dc gen2) send me a pm of your address and PayPal email if you're interested. Once I get enough orders I'll receive the paypal orders and get materials. All units should ship within a week of receiving all materials.

The castle rda top half will be black on the shipped units instead of shiny steel. Should look more cohesive with the black ceramic base of the DC

Let me know of any questions you guys have! I'll assemble each unit as shown + another crafty pad inside the rda which I found helps compress the top pad in dual mesh mode for bigger clouds and faster extraction.


hAd3Ufp.jpg



Tldr; temp controlled, group friendly, high capacity wax tank that can also vape and microdose herbs. $45, pm me to order.
 

GreenHopper

20 going on 60
Hey everyone, over the last week or so a few redditors and I conducted a bunch of experiments with mesh concentrate pads (mostly S&B crafty pads) in ceramic donut concentrate atomizers for loading a larger amount and getting multiple hits between reloads. After many tests I found that the best high capacity "Load and Go" set up was a Divine Tribe DC gen 2 dry herb atty with crafty pad mesh. The top piece of the dc gen 2 was less than optimal because of the perforated screen that presses down into the bowl. I found that the castle RDA was a perfect fit for the base of the DC and also is the perfect height for a buffer crafty pad to keep everything compressed onto the oven and prevent splatter.

I'm selling fully assembled units for $45, if you dont feel like making one yourself.

nBMkMVO.jpg



DIVINE CASTLE OIL CARTRIDGE - "CASTLE CARTRIDGE" for short

FEATURES:

-Holds up to .7 g of concentrate. Tested mostly with pull to snap shatter

-Full temperature control, keeps hits tasting fresh and allows anything from light microdoses to large rig sized hits

-4 airflow settings for customizing ratio of vapor/outside air. Personally I like setting it to 1 medium hole and using it as a carb while riding the button

-Interchangeable 510 drip tips. Each unit will come with a metal drip tip and a glass drip tip. Currently investigating ways to make a 510 driptip that is a male joint for connecting to water pipes. You can install a long drip tip for higher temp hits for cooler vapor

-Microdose dry herb (.05-.1) with single mesh installed or remove both meshes to use dc gen 2 with dry herb as intended (full pack is about .25)

-No noticeable leaks after 3 grams of tests, absolutely 0 reclaim on build deck or base of herb pod.

-No need for cooldown hits. All the percs of the Hercules without the 1-3 minutes of cooldown hits.

-Easy to load. Recently I've enjoyed taking a glob and squishing it on the bottom of the top mesh, then lightly press the pad into the oven dab facing the bottom mesh, then I'll heat to about 300 and wait a few seconds then fully press the tip pad so it is nearly flush with the top of the ceramic base. This way you can load and soak in large amounts of product without having most of it pooling at the top of the mesh, resulting in faster vaporization and nearly eliminates splatter.

-Group friendly. once preheated to temperature it can be passed around and ripped while riding the power button, no pulsing or draw speed technique required

Build and size comparisons:

https://imgur.com/a/Atqcn



I am getting 15-25 hits off a load. Single pad holds about .3 but with both pads it's more like .5-.7

$45 plus shipping for the unit, glass drip tip, heat sink, plus all other parts of both atomizers (castle build deck, original top for dc gen2) send me a pm of your address and PayPal email if you're interested. Once I get enough orders I'll receive the paypal orders and get materials. All units should ship within a week of receiving all materials.

The castle rda top half will be black on the shipped units instead of shiny steel. Should look more cohesive with the black ceramic base of the DC

Let me know of any questions you guys have! I'll assemble each unit as shown + another crafty pad inside the rda which I found helps compress the top pad in dual mesh mode for bigger clouds and faster extraction.


hAd3Ufp.jpg



Tldr; temp controlled, group friendly, high capacity wax tank that can also vape and microdose herbs. $45, pm me to order.

Where are you prepared to ship to?

I'm in the UK, any idea what the shipping would cost?

What's the diameter of the unit? Would it fit in a 24mm side by side mod?
 
GreenHopper,

supershredderdan

Well-Known Member
Manufacturer
Still waiting on the drip tips and heatsinks, but have everything else. Will try to ship the first batch by monday the 18th or so. Here is the black castle to compete the look (drip tip band will be black on shipped models too)

Single high temp dabs, load and go wax tank, microdose herbs, and vaporize a full bowl of herbs. Do it all with Castle Cartridge!

VtoXJ3C.jpg


VtoXJ3C.jpg


mXolGoX.jpg


YSUZnbB.jpg


IL5hI7W.jpg


UWDH3Ox.jpg


Never too late to PM, as long as there is enough interest (15 or more units per batch) I can keep filling orders. Also if you want to do this yourself let me know any questions you have
 

tennisguru1

EXCELSIOR!
Yep all black on shipped units
This looks really cool & smart for on the go.
I only have a Xvista Vape for home micro dabbing & cCell auto pen & refillable cart for out on the Tennis
Court that does 92% CO2 Distillates with no cut at all.
I like what you did , pure genius for on the road waxy shatter dabs.
Being that I don't have a Mod Box, what would you suggest I get for my
first modern type TC all around use mod & best for your device.
I do have a Yocan Torch that I got for $20 with a $16 bong from DHG
that works great for a pass around piece for buds.
So that is all my experience & stuff & I wish to keep it at a minimum.
Like my 15 yr old Volcano, still works great as I feel it's still the best.
Thanks for your help & patience
 

supershredderdan

Well-Known Member
Manufacturer
This looks really cool & smart for on the go.
I only have a Xvista Vape for home micro dabbing & cCell auto pen & refillable cart for out on the Tennis
Court that does 92% CO2 Distillates with no cut at all.
I like what you did , pure genius for on the road waxy shatter dabs.
Being that I don't have a Mod Box, what would you suggest I get for my
first modern type TC all around use mod & best for your device.
I do have a Yocan Torch that I got for $20 with a $16 bong from DHG
that works great for a pass around piece for buds.
So that is all my experience & stuff & I wish to keep it at a minimum.
Like my 15 yr old Volcano, still works great as I feel it's still the best.
Thanks for your help & patience

id recommend a dual battery box mod compatible with arctic fox, it is really easy to install and set profiles and performs much better than most stock firmware. look into the cuboid or maybe sinuous p80 for single battery options
 
supershredderdan,
  • Like
Reactions: GreenHopper

tennisguru1

EXCELSIOR!
dual battery box mod compatible with arctic fox
something like this?
iStick Pico Dual
I can go with whatever you think is your preferance.
I hope it is my only Mod for years, I don't want a long list of things I
own, just a few good things of each type.
I waited for these TC mods so what is a good power for size?
75 - 80 watts?
Need it simple to read sub om carts I want to also fill
with distilate.
Thanks, I'll go with your experience.
Just want 1 reliable mod, do not want to upgrade to
next hot tricky thing more powerful ect ect..
I think you get me.
Thanks
Almost ordered a target mini on bad advice.
 
tennisguru1,

tennisguru1

EXCELSIOR!
id recommend a dual battery box mod compatible with arctic fox, it is really easy to install and set profiles and performs much better than most stock firmware. look into the cuboid or maybe sinuous p80 for single battery options

I am thinking you mean
Wismec RX Mini 80W TC Vape MOD
Eleaf Aster 75W TC MOD
Eleaf iStick 50W Mod
Eleaf iPower 80W TC Box Mod
Inano ??

Do any come as kits with stuff I can use as a newbie?

 
tennisguru1,

tennisguru1

EXCELSIOR!
I am thinking you mean
Wismec RX Mini 80W TC Vape MOD
Eleaf Aster 75W TC MOD
Eleaf iStick 50W Mod
Eleaf iPower 80W TC Box Mod
Inano ??
Do any come as kits with stuff I can use as a newbie?
sinuous p80

This looks really good, out of stock at 2 places, will keeplooking
Thx
 
tennisguru1,

tennisguru1

EXCELSIOR!
id recommend a dual battery box mod compatible with arctic fox, it is really easy to install and set profiles and performs much better than most stock firmware. look into the cuboid or maybe sinuous p80 for single battery options

I'm trying to get this as per your suggestion, as it looks really cool &
with artic fox looks like I can use it with your coil.
Can you tell me where I can purchase it from
a trusted source & a good battery for it?
When I'm out with your coil, about how many wax hits can I store in bowl?
without refilling of course , ty.
 
tennisguru1,

supershredderdan

Well-Known Member
Manufacturer
I'm trying to get this as per your suggestion, as it looks really cool &
with artic fox looks like I can use it with your coil.
Can you tell me where I can purchase it from
a trusted source & a good battery for it?
When I'm out with your coil, about how many wax hits can I store in bowl?
without refilling of course , ty.

Varries wildly but I've gotten upwards of 20 hits from a full load, more common is 5-10 from maybe .2

If you don't mind waiting a few weeks to get it, I've found efun to be the lowest prices for many af compatible mods
 
supershredderdan,
  • Like
Reactions: GreenHopper

tennisguru1

EXCELSIOR!
Varries wildly but I've gotten upwards of 20 hits from a full load, more common is 5-10 from maybe .2

If you don't mind waiting a few weeks to get it, I've found efun to be the lowest prices for many af compatible mods
Joyetech EVic VTwo Mini TC Box Mod
This is on sale & in stock for $20 is this a
good start for your tank?
Place & price is right.
Efun
 
tennisguru1,

tennisguru1

EXCELSIOR!
Joyetech EVic VTwo Mini TC Box Mod
This is on sale & in stock for $20 is this a
good start for your tank?
Place & price is right.
Efun
Wismec Sinuous P80 80W TC Box Mod
This one is $28
They are both in stock?
Preference with?
Developer of Artic Fox says
So in your opinion, what's the current best single 18650 mod that supports Arctic Fox?

#8darkhawk, Jul 7, 2017
IMHO it is eVic VTwo Mini.

#9maelstrom2001, Jul 7, 2017
 
tennisguru1,

supershredderdan

Well-Known Member
Manufacturer
Joyetech EVic VTwo Mini TC Box Mod
This is on sale & in stock for $20 is this a
good start for your tank?
Place & price is right.
Efun
that one is great, the vtc mini is the exact same hardware tho and the kit + a juice tank is i think $15 or $16
 
supershredderdan,
Top Bottom