Crafty/Crafty+ by Storz & Bickel

vapviking

Old & In the Way
Hi guys, just wanted to ask which screen is best for the Crafty as theres a lot of different textured screens that come with it
A lot of screens?
Aren't there only two, fine ("normal") and coarse? Fine for bottom of chamber and coarse for cooling unit. I have switched to only the fine screens, for both uses.
 

m0sh

Singer Song Writer Stoner
Hey guys, so I got the Crafty for 2 weeks now and I also have an old Arizer glass whip "head" - so I have the small metal basket people started using.

So...just fill it green and put it in the crafty chamber?
 
m0sh,

justcametomind

Well-Known Member
You can't go wrong. After some time of use my only concern is throwing the capsule in from a cold start or putting the capsule when the goal temperature has already been reached. If I am after saving cannabinoids I do the latter. Does the empty chamber during heating time harm the vaporizer?
 
justcametomind,

Little Bill

Oldest stoner on FC
A lot of screens?
Aren't there only two, fine ("normal") and coarse? Fine for bottom of chamber and coarse for cooling unit. I have switched to only the fine screens, for both uses.
Yes there are only two. I use coarse screens only and vape 1/2 bowl with the liquid pad over the leaf. I usually divide the 1/2 bowl (approx. .14 gram) into two sessions. No capsules for me.
 
Little Bill,

Jon4Fun

New Member
Hi there,

I'm planning to make the screens a disposable element in my Crafty and Alternate.

Would this be a good choice?


________________________________________


Hi,
Sorry to bother you but i was wondering if you had any luck in sourcing an alternative/compatible (normal/coarse) screen for your vape.

I'm doing the same, I have a Mighty. I found a replacement screen (slightly tighter mesh) for the mouthpiece/cooling-unit on eBay and they fit great...

http://www.ebay.ie/itm/15mm-Tobacco...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649

What I am still looking for is an alternative/compatible FINE 15mm screen for the Filling Chamber.

I saw the links you provided but the size (20mm & 16mm) are the wrong size and my Mighty is very picky about the EXACT sizes.

Have YOU had any luck in sourcing 15mm FINE screens from a 3rd party (i.e. cheaper)?

Regards,
Jon
 
Jon4Fun,

ktmstick

Well-Known Member
I will only ever use s&b screens. I bought multiple off ebay and they all end up giving me a sore throat so back to genuine ones and my problem goes away. Not willing to risk my health with unknown Chinese crap just to save a few £/$.
 

Jon4Fun

New Member
I hear & UNDERSTAND.. I do not want lose/frayed wires in my throat etc.
That is why I changed the mesh size on the cooling unit to a tighter mesh.
NB: I am NOT using cheap Chinese rip-offs. Everything is a cheap Chinese (made) product.
Do you think your wire screen is made in the UK or USA??

Honestly, I got a good product (from the UK, for what that is worth) and it is better than original.

Thanks for your concern. I do appreciate it!!!!

Still need a NON-brand name compatible FINE Filter Screen.
 
Jon4Fun,

cgod

Well-Known Member
Hi guys i have the latest firmware Crafty which has the 20% extra battery sticker on it, just a question, i read everywhere it takes two hours from a dead battery to charge to a full battery, but mine is taking 2 hourd and 40 mins, do you think the extra 40 minites are the added 20% battery or is this unusual?
 
cgod,
  • Like
Reactions: lumholtz

lumholtz

New Member
Hi guys i have the latest firmware Crafty which has the 20% extra battery sticker on it, just a question, i read everywhere it takes two hours from a dead battery to charge to a full battery, but mine is taking 2 hourd and 40 mins, do you think the extra 40 minites are the added 20% battery or is this unusual?

No. The bigger the battery capacity, the longer it will take to charge.

What firmware version is it running?
 
lumholtz,
  • Like
Reactions: KidFated.

AgentO

New Member
Hi All,

Just joined the forum after a long time lurking. My third Crafty has given up 3 months outside the 2 year limit, S&B are offering me a new one with a discount, but really, more money for such a flaky (but otherwise great) product that will probably also be dead shortly after the next 2 years, and all the hassle of arranging it's trips back to Germany.

I've been through most of the Crafty issues, broken button, not heating, not charging, broken case, and I was reasonably OK with the replacement policy & service. My feeling is that the Crafty was a kind of afterthought following the Mighty for stealth vaping, but the whole design is just expecting too much from the battery. So after trying to use the first 2 as a main vape, I also got a Mighty, so that the 3rd Crafty gets an easy life. It has only been used out walking, at the pub, concerts etc , and has been babied to an extreme, I've always allowed it to cool down before recharging, almost never run totally flat, only ever used the S&B charger (and a USB pack very occasionally if out & about - it's designed to allow this after all), it's on 71 hours, v2.10 firmware, S/n 456xx.


The problems started a few days ago, went out, seemingly with a full charge, but when I tried to use it it started OK then suddenly dropped from 'full' charge to nothing at ~180C. Tried to charge it again, it starts OK with the first bar flashing, then suddenly jumps to fully charged & stops charging. Using it then just does the same thing. Plugging in the charger now shows green,red,blue then either goes to solid blue (as if charged), or nothing.

I have got myself a Pax3 (arriving today yay) to keep me going outdoors, but have a feeling I'm going to miss the Crafty clouds & would love to keep it going. I've been through a a few vapes already, DaVinci original, Ascent, MiniVap, but the S&B ones just work better when they work.

I am looking to see if I can repair it myself by replacing the battery, it seems doable, though I'm no expert on soldering etc.

The question is, does anyone know if fitting a new battery is likely to sort this out? It seems to me that the unit is thinking the battery is full when it is clearly not, so maybe the battery will just not take the charge.

Cheers
 

Jospapaia

Well-Known Member
Hi all,
So I finally come to realization that I need a new electric vaporizer after using the vapman for the last three years.

After reading a lot of reviews about the crafty, pax 3 and the de vinci IQ, I decided that the crafty is the chosen one. However, some of the messages here made it look like it has 2 years limitiation which really bummed me over. I really like its size and I don't mind the battery since I'm going to use it mainly at home, but spending this much on a vaporizer that will hold for two years is not really attractive (specially after owning a vapman which looks like it can last forever).

So I guess my question is - is it really so? Is it inevitable?
If it is would you suggest to spend a little extra and get the mighty or pick one of the other options I've listed above?

I guess it will be difficult to get a straight answer to this but I would appreciate your opinions anyways.

Thanks!
 

Mr. Me2

Well-Known Member
Hi all,
So I finally come to realization that I need a new electric vaporizer after using the vapman for the last three years.

After reading a lot of reviews about the crafty, pax 3 and the de vinci IQ, I decided that the crafty is the chosen one. However, some of the messages here made it look like it has 2 years limitiation which really bummed me over. I really like its size and I don't mind the battery since I'm going to use it mainly at home, but spending this much on a vaporizer that will hold for two years is not really attractive (specially after owning a vapman which looks like it can last forever).

So I guess my question is - is it really so? Is it inevitable?
If it is would you suggest to spend a little extra and get the mighty or pick one of the other options I've listed above?

I guess it will be difficult to get a straight answer to this but I would appreciate your opinions anyways.

Thanks!
Hi @Jospapaia !

Personally, I don't think the Crafty is a 2 year vape. But the batteries can generally only hold so many hours before they need to be replaced. So I guess it depends on how hard/heavy you use it.

S&B give it a relatively short warranty but they're good about RMAs. Mine crapped out and they sent me a new one. And they do have a battery replacement program.

I do recommend getting extra cu's. And other possible extras: I use a salt spoon to fill mine, and I suggest a RYOT Packratz (its smell proof).

Enjoy!
 

Used2use

Sometimes to stupid to become a fool
spend a little extra and get the mighty
imo only reason for a crafty is the smaller size - if u can live with a little bigger then the mighty is worth the few extra bucks (durability, a bit faster heat up, faster and pass through charging, larger cooling unit...)
 
Last edited:

Little Bill

Oldest stoner on FC
If you are a light "user" and use "on the go", then the crafty makes sense. Is you use mostly at home, then the Solo 2 is better in many respects.
 
Little Bill,
  • Like
Reactions: Jospapaia

vapviking

Old & In the Way
Isn't it the crafty will get overheat warning if it turns on for a prolong of time?
I don't think Crafty overheats from simply being on for a prolonged time, but it will sometimes overheat (and shut down) if being heavily hit for a prolonged period of time, like, with multiple users at higher temps.
 
vapviking,
80 hours for my Crafty, RIP, it was a long run :D

the problem was:
switching on > heating up to 180 in 3-4 minutes then > overheating > then switching off automatically, and finally > red/yellow led blinking :(

i will send mine to their warehouse in Germany and will also attach a letter:
7SnLUJK.jpg


i'm not very good at speaking english but i've done what i've done :D
 
Last edited:
I don't think Crafty overheats from simply being on for a prolonged time, but it will sometimes overheat (and shut down) if being heavily hit for a prolonged period of time, like, with multiple users at higher temps.
By high tempt, you mean 400+?
 
diandiandian,

cgod

Well-Known Member
Guys ive got four hours in my crafty, i fully charged it yesterday night,ive realised heating up my first bowl of the day, as soon as it heated up it dropped from a full charge (6) to 5, how did it drop a bar after just simply heating up
 
cgod,

vapviking

Old & In the Way
Guys ive got four hours in my crafty, i fully charged it yesterday night,ive realised heating up my first bowl of the day, as soon as it heated up it dropped from a full charge (6) to 5, how did it drop a bar after just simply heating up
That doesn't sound typical, but...
I was just reading yesterday on S&B's site about batteries and calibration. Yours doesn't seem old enough to need it, but they do suggest occasionally running battery all the way down, then fully charging, to re-calibrate the status meter. So, it seems possible that you just have a temporary glitch in the meter.


By high tempt, you mean 400+?
Sure. My experience with overheating came when I started coupling to a water tool and could increase to max. temp. use.
 
vapviking,

Crafty Vaper

Ain't easy being green
new Crafty App available from the 4th of september
* turn on craftyvia app
* find my crafty
* extend auto shutoff
***


No update until now?!

Has nobody answers to the questions I mentioned a few posts before?

Hi fellas! My Crafty works 321 hours withoriginal battery now. I still get 3 short 8 minute sessions out of one charge. I prefer to do two 15 minute sessions and then charge.

I have got a question to all of you who have changed the battery in your crafty:

Can you send me a little information how to do it and which battery will be perfect? Idon't want an exchangeable battery. The crafty works great how it is built , I only want to renew the battery. Thanks for your awnser , I appreciate it!
 
Crafty Vaper,
That doesn't sound typical, but...
I was just reading yesterday on S&B's site about batteries and calibration. Yours doesn't seem old enough to need it, but they do suggest occasionally running battery all the way down, then fully charging, to re-calibrate the status meter. So, it seems possible that you just have a temporary glitch in the meter.



Sure. My experience with overheating came when I started coupling to a water tool and could increase to max. temp. use.
My sweet spot is around 360~380. Will I have the overheat problem for a prolong use?
 
diandiandian,
Top Bottom