VapCap

Well-Known Member
Manufacturer
Greetings!

It sure has been busy here in DynaLand the past two weeks.
The M4AF concept so far has exceeded our expectations. The goal was to help promote sharing and if we could reduce the need for combustion extraction at the same time, well double bonus. I sure hope to begin seeing some new friends here. :)

We are nearly all caught up with all of the orders, and if yours hasn't shipped, first off, thank you for your patience, it should very soon.

We created a closed Facebook group for Dynavap discussion called DynaVerse
https://m.facebook.com/groups/479140909096527?view=
if anyone is interested.

Now that we have our newly redesigned OmniVap, Ben (our videographer) thought it might be a good idea to do some testing to make sure it would be sufficiently durable.
I probably should have done this as part of the beta testing before we sold them, but I was pretty sure there wouldn't be any significant structural strength differential over the previous design. In fact, I was pretty sure, the new faceted design, would actually be stronger.

So we tested it.


The close up camera shut off during the first take, so we ended up running it over twice. With both wheels just to make sure. But least this way we can be confident, it didn't just get lucky and land between the tread blocks.

Afterwards, we re-shot the screen adjustment for the Ti tip video. I even used the run over OmniVap. Look close, you might see a few scratches.


And to round out the week, it was harvest time. I planted these last fall, and they were ready.
This is the Semi soft neck variety, I've been selectively planting for the past 15 years. They produce extra cloves above ground, and only 4-7 large easy to peel ones underground.
The hard neck variety I grow has even bigger cloves, but won't be ready for another week or so.

IMG_20170713_192023288_HDR_zpstcp3vs8e.jpg


IMG_20170713_200749792_zpspbasw5gt.jpg


IMG_20170713_200723634_zpsvmng2fcu.jpg

So if there are any garlic lovers out there, just let me know, and I would be happy to share some with you.

Oh and one more thing. If you are using Photobucket to host pictures like I was when I began posting here, beware!

They recently changed their policy and now will allow you to post pictures until you get enough pictures posted it would be difficult to replace all of them, then they stop supporting the link until you pay for their premium service. This all happens with no warning until your pictures are all replaced with an over limit sign until you pay up.
Please forgive the rant, I just feel this is important as many people post pictures, and I would prefer to spare everyone the hassle of a $400 a year extortion fee for premium hosting.

All in all much more to be happy about than anything else.
Thank you for the support!

Cheers,

George
 
Last edited:

kushkush

happy camper....
Greetings!

It sure has been busy here in DynaLand the past two weeks.
The M4AF concept so far has exceeded our expectations. The goal was to help promote sharing and if we could reduce the need for combustion extraction at the same time, well double bonus. I sure hope to begin seeing some new friends here. :)

We are nearly all caught up with all of the orders, and if yours hasn't shipped, first off, thank you for your patience, it should very soon.

We created a closed Facebook group for Dynavap discussion called DynaVerse
https://m.facebook.com/groups/479140909096527?view=
if anyone is interested.

Now that we have our newly redesigned OmniVap, Ben (our videographer) thought it might be a good idea to do some testing to make sure it would be sufficiently durable.
I probably should have done this as part of the beta testing before we sold them, but I was pretty sure there wouldn't be any significant structural strength differential over the previous design. In fact, I was pretty sure, the new faceted design, would actually be stronger.

So we tested it.


The close up camera shut off during the first take, so we ended up running it over twice. With both wheels just to make sure. But least this way we can be confident, it didn't just get lucky and land between the tread blocks.

Afterwards, we re-shot the screen adjustment for the Ti tip video. I even used the run over OmniVap. Look close, you might see a few scratches.


And to round out the week, it was harvest time. I planted these last fall, and they were ready.
This is the Semi soft neck variety, I've been selectively planting for the past 15 years. They produce extra cloves above ground, and only 4-7 large easy to peel ones underground.
The hard neck variety I grow has even bigger cloves, but won't be ready for another week or so.

IMG_20170713_192023288_HDR_zpstcp3vs8e.jpg


IMG_20170713_200749792_zpspbasw5gt.jpg


IMG_20170713_200723634_zpsvmng2fcu.jpg

So if there are any garlic lovers out there, just let me know, and I would be happy to share some with you.

Oh and one more thing. If you are using Photobucket to host pictures like I was when I began posting here, beware!

They recently changed their policy and now will allow you to post pictures until you get enough pictures posted it would be difficult to replace all of them, then they stop supporting the link until you pay for their premium service. This all happens with no warning until your pictures are all replaced with an over limit sign until you pay up.
Please forgive the rant, I just feel this is important as many people post pictures, and I would prefer to spare everyone the hassle of a $400 a year extortion fee for premium hosting.

All in all much more to be happy about than anything else.
Thank you for the support!

Cheers,

George

Okay George, I'll take you up on your garlic offer, if you can stick it in one of those no-smell bags. And I'd like a couple of onions too, and maybe a head or two of lettuce. You know, just a couple or so of everything in your garden. Oh yeah, squash too. And strawberries. And tons of tomatoes! I ordered last Saturday but it looks like that may never see fruition in this life so just wait till your whole garden harvests and then you can send everything at once. Okay? :rofl:

Actually, I'm pretty impressed with your garlic...what a successful crop! From what all I read around here, I'd say you're a pretty all-around competent person! :nod: I can't wait to find that out for myself! :)
 
Last edited:

little maggie

Well-Known Member
What is m4af? I didn't order during the sale because I have a box filled with vapcaps ( made for them by winegum). But seeing these new ones I may have to upgrade. I wonder when the next sale will be.
 

Whissmu

Well-Known Member
They had asked that members here not flood them with shipping inquiries, that while they will work ASAP
to fill all orders, answering antsy enquirers would take away from shipping. Fair enough.

Thank you mate, I followed your advice and .... surprise my 4july dynastash has been sent and I do not have a shipping confirmation email either ,,
Was beginning to have apedreaminetos with the dynastash, ha,ha,ha :rofl:
image.jpg

image.jpg
 

Ricardo

Well-Known Member
Oh and one more thing. If you are using Photobucket to host pictures like I was when I began posting here, beware!

They recently changed their policy and now will allow you to post pictures until you get enough pictures posted it would be difficult to replace all of them, then they stop supporting the link until you pay for their premium service. This all happens with no warning until your pictures are all replaced with an over limit sign until you pay up.
Similar story with Dropbox - I don't think you lose access to your documents but they don't allow you to delete files to free up space so you can't really use it unless you upgrade :cuss:
 

tonuzzi

Spoon Dogg
So Ive had my omnivap for about a week and it's my first dynavap product. Is it me or does this thing knock me on my ass with just a small amount of herb? Holy shit, I wish I had tried this product sooner! Still trying to refine my technique but man does this vape ever kick my ass! :love:
 
yeah, i find the dynaVap totally kicks ass. Ive goth the M. best portable Vap, along with mighty and vapor genie. Only the E Nano holds a higher status in my collection, but thats not portable so... Dynavap rocks on the go! As for micro dosing its the best! (other than nano). I love love love the throwback to the old (gross) one hitter days, when i thought i was so slick & stealthy... ugh remember all that black goo you'd have to clean out with a coat hanger or pipe cleaner. a peek at what the lungs were getting sooooo gross.
 

SloJimFizz

Unknown Member
Hello all, first time posting, yay! Just a quick question for anyone who has an Omnivap, I've been leaving the airflow wide open and using the mouthpiece to spin it like I do on my TiWoody-S. This won't hurt the Omnivap in anyway will it?
The thing is freaking titanium. I doubt spinning the mouthpiece between your fleshy fingers is gonna do much damage. :D
I leave my Omni wide open too and work the airport. I can't spin it with the mouthpiece though. Too small for my banana hands. I need girth to wrap my fingers around to spin and I pivot the mouthpiece on my palm.
Can't wait till my facets arrive. Looking like Monday delivery for me.
Yay, more happy Vpcappers posting! :wave:
 

Dimebag82

Well-Known Member
The thing is freaking titanium. I doubt spinning the mouthpiece between your fleshy fingers is gonna do much damage. :D
I leave my Omni wide open too and work the airport. I can't spin it with the mouthpiece though. Too small for my banana hands. I need girth to wrap my fingers around to spin and I pivot the mouthpiece on my palm.
Can't wait till my facets arrive. Looking like Monday delivery for me.
Yay, more happy Vpcappers posting! :wave:
I was more thinking about somehow damaging the o rings inside or something, because when I spin it, it's not as smooth as my ti woody s, its more of a "grindier" spin. But it does work. Just want to make sure I'm not going to damage the condenser or o rings
 

ClearBlueLou

unbearably light in the being....
I have a question about my (hopefully soon to ship) new Omni: How tight is the threading which adjusts the airflow? More to the point, when spinning the unit over the torch flame, does the airflow adjustment tend to change?

The threading is of course tight if you screw the pieces together but not otherwise.
More to the point turning the 'Cap during the heating phase will not change any settings or modify the performance

I have noticed the progress dynavap has made on their website. I am left with the impression George will continually tinker with something eliminating every choke in the flow and it will be perfected overtime.

I think I have a brown ring around my neck from where I keep my head.
I kept wondering why my order wasn't showing up. I went on the DV site to find I hadn't finished my order. Called in and Matt found I had signed up twice. So don't vape and try to walk. I think I need to wash my neck. Doc
Good catch, Doc - may have been what made MY light come on...
DAMN!!! with my high tolerance a 1/4 OZ lasts me about a week
If I tried to VC a quarter in a week, I would have time for nothing else...
I feel like I'm in bizarro world sometimes with the VapCap. My experiences vary a lot from most of what I read here.

I stuff mine full to the brim, packed tight. For all of my other vapes I don't pack at all, I leave it loose.

Heating can take up to 18 seconds on the first cycle, with a triple torch! I go through butane like a madman lol. Even the quad torch takes about 8 seconds from a cold start. Don't get me started on single jet torches, it must be like how using a Bic feels to the rest of you.

I get 6+ heat cycles per load. The first and last one can be a little light with vapor, but the rest are huge clouds. I tend to lung pull with brief pulses of closing the carb and mouth pulling. Even with the new tip I think the airflow with the carb closed is a bit tight for overall use. With my Omni, about 40-60% closed is my preference, depending on mood.

I can stuff .11 grams in the Gen 3 tip. I've just started using the Gen 4 tip somewhat recently. I left it at maximum depth and it feels bigger than the last tip, but I'm not sure it is. Either way, I will probably reduce it soon, at least one notch, maybe both. I will still pack it that way no matter what, packing full would probably work even better with the minimum depth.

I do sometimes loosely pack, or throw in a nug. Those occasions are pretty rare though.

I used to heat past the second click by two seconds the majority of the time. I find with the new tip I don't feel the need to do that as much. I'm using the same cap I got nearly a year ago, even though I have several unused caps and a couple that are lightly used. Now I usually stop at the second click or maybe just a split second after.

I feel like an artifact of the Mandela effect. Is there anyone else out there like me?
Don't know what you mean by the 'mandela effect, but I sure appreciate breaking it down like you did :tup:
All cleaned up here now, and delivering one (maybe two) "M"s this evening. One is expected, but anxious to surprise someone with the other. Cheap (but full) lighters for each, too.

Have only played with it for a second, but LOVE the DV/Honest dual torch. She's gonna be in the VC pouch for a while I hope!

Favorite part of my order? The new super textured Ti body!!! Put it on the OMNI and is uber sexy! Feels so great in hand, too.

All differences sound about right to me based on how you're loading. May have to try some of this myself soon, but my tech is much more like most of what you read here.
I have a similar date tonight myself :cool:

I love my DV/dual-jet.

How does the new body affect rotation during heats?

I was more thinking about somehow damaging the o rings inside or something, because when I spin it, it's not as smooth as my ti woody s, its more of a "grindier" spin. But it does work. Just want to make sure I'm not going to damage the condenser or o rings
That 'joint' isn't supposed to turn, really - much less spin. Even if you lubricate the o-rings every time, they'll still be the fastest-wearing part of your 'Cap.
 
Last edited:

tonuzzi

Spoon Dogg
yeah, i find the dynaVap totally kicks ass. Ive goth the M. best portable Vap, along with mighty and vapor genie. Only the E Nano holds a higher status in my collection, but thats not portable so... Dynavap rocks on the go! As for micro dosing its the best! (other than nano). I love love love the throwback to the old (gross) one hitter days, when i thought i was so slick & stealthy... ugh remember all that black goo you'd have to clean out with a coat hanger or pipe cleaner. a peek at what the lungs were getting sooooo gross.

So my vape family is now complete. With the Minivap, Solo 2 and my Omnivap....MY VAS HAS ENDED!!! :haw:
 

stardustsailor

Well-Known Member
Accessory Maker
I've found a con regarding the Vapcap.
:evil:

Last Saturday I was on acid.
Took about 500 micrograms.

At a moment I got the urge to vape some herb .
Well, I was totally unable to use my beloved VC .
Very difficult to roll and at the same time trying to aim and heat the cap.
It just kept changing shape and size,for many hours.
Sometimes ,it kept wrapping ,too !


:p
 

DirtyD

Well-Known Member
Owned and mastered the M since just before 4/20, just saw "delivered" for my brand spanking new titanium tip from 4th July sale!!!!!))))))). Cannot wait to finally understand how ti tip behaves on M and my own tubes!!! So jazzed!! Cheers! D.
 

flotntoke

thoroughly vaped
George: "I would say that is a success." Such a subtle one, this genius. A great success - as it seems with every DV product (or at least the ones we get to see)! Thanks for the great vids, the post, and all the work from the DynaTeam - oh yeah, and the garlic offer. Love you guys!

.... I have a similar date tonight myself :cool:

I love my DV/dual-jet.

How does the new body affect rotation during heats?


That 'joint' isn't supposed to turn, really - much less spin. Even if you lubricate the o-rings every time, they'll still be the fastest-wearing part of your 'Cap.

DV dual jet is AWESOME! Think it is my favorite jet lighter ever.

New Ti body with rotation? So glad you asked. Was popping on to comment on exactly this. First, it looks so sweet. But, I think the coolest part about it is rotation grip, or whatever you'd call it. I put mine on and loaded up to take out. Wasn't really thinking about trying it as I had vaped up (a'la nano) before heading out. Was at one of my favorite watering holes and needed to top off. Maybe it was buzz I got there with, maybe the beer, I don't know. But when I started heating it felt so great rotating that I chuckled and let out a good "Oh yeah, nice!". Not such a good idea when trying to be subtle down wind from the smoking crew outside. Somebody asked, what's nice? Tried to play it off as getting a good text, but had to slink off behind the building to VC in private!

Anyway... YES! Love the way the new over-shaped body feels in use. Not only does it feel like it is designed for rotation, and look totally badass, the way mine is laid out (maybe all?) it is very easy to find the airport hole on it's bit of a different cut out side. EXCELLENT!
 

Vapor_Eyes

taste buds
All differences sound about right to me based on how you're loading. May have to try some of this myself soon, but my tech is much more like most of what you read here.
Yes, my experiences make sense based on how I use my cap. To be honest it isn't very efficient, it's not as wasteful as it seems though.

Using it my way is almost like a flower version of @Squiby's all-day sucker concentrate solution. One chamber can last me a long time, easily several hours. I do have a low tolerance and generally use very potent cannabis, so that helps it last too.

I developed that technique because it gave me the best effects and most consistent cloud production. I'm not necessarily a cloud chaser but big clouds usually mean big effects, and as a medical user, sometimes big relief is necessary.
 

goodpunk6

Well-Known Member
Only the E Nano holds a higher status in my collection, but thats not portable so... Dynavap rocks on the go!

I've got a Newvape Flowerpot (a great compliment to any enail btw), and nothing beats that thing. Of course, it's gotta get plugged in. My Omnivap/vong and M are perfect for being outdoors. That can't be beat.

I love love love the throwback to the old (gross) one hitter days, when i thought i was so slick & stealthy... ugh remember all that black goo you'd have to clean out with a coat hanger or pipe cleaner. a peek at what the lungs were getting sooooo gross.

I really identify with this. I got really used to just digging in and taking a quick one. When I'm on the go, or just going to a friend's place for a quick session, my Omnivap is complete bliss.

I love that you can just get your reclaim by cleaning this thing and then vape that.
 

Rickuz

Member
What do you all think about the size of the bowl in the titanium tip? Did you ever use a scale to check how much herb you can fit inside it?

Do you grind fine or coarse? Do you pack tightly or loose?

Is one bowl enough if you want to get somewhat blasted? Or do you have to reload? I'm just curious.
 
Top Bottom