Discontinued Supreme Vaporizer

[Morty]

Ok. I don't have much time to write (downtown w/ some friends), but I wanna say that the 2 hits I took off the Sup, the flavor & smoothness were out of this world.

The bud I have, I've rosined before, and both hits tasted just like those rosin dabs. And so SMOOOOOTH!

(It took me 15 minutes to write this )

 

[Morty]

Wow! Still in testing phase, but man does this thing kick ass! Got so many thoughts & anecdotes to share, but still have some testing to go. Vapocane just came in, gonna try that shortly.

Real quick, I just heated her up to around 330°F, then inserted the rod, I mean stem. Couple seconds of heat soak & BOOM! Instant, thick, flavorful vapor. Big cloud! So cool seeing it shoot up the tube. Went back for another hit at around 300°F & got a little cloud, & still flavorful. Pull out the stem, & it's still got life in it. Green & tan w/ plenty of crystals still on the chunks!

Gonna pre-insert the stem back in for a conduction hit at around 360°F (lovin' the low temps & the high temps...mostly more on that later), & then it's Vapocane testing w/ the Supreme! This shits living up to the hype!

 

[shaolinmilk]

Haven't used the Supreme in a while; pulled it out last night and holy shit did it fuck me up. This thing is without a doubt the device I go to if I want to go to the moon.

 

[vapirtoo]

I totally agree that the Supreme should only be used when you want to really get medicated, and I mean like almost incapacitated.
I've been humbled enough waking up and still feeling toasted and still having to go to work.
Weekends and vacations are my Supreme
sessions.

 

[Morty]

I really enjoy hearing about other people's usage patterns. Having the SV3 now for 5 days, it has confirmed to me I must have a higer tolerance (i.e. micro-doser during the day, party animal at night ).

Not that the Sup doesn't/won't funk you up. It'll funk you up real good. You'll be so funked up, you'll be pulling Earth, Wind & Fire records off the shelf & gettin down like Jackson Browne on a merry go round. Example: Last night after work, did some more Vapocane testing w/ the Sup (lovin' it!), & then switched to the bong. After 5 or 6 b2b loads between the two (I'm testing hard!), I was fucking reeling. It was doing some boogie woogie on my brain. Had to go lay down. Felt like the beginning of a green out. Passed out soon after & woke up still a bit high.

I'm really feel like this vape is gonna become my daily driver. Just checks so many boxes for me. Sorry for the fucking soliloquy, but I talk a lot when I get really high. This vape gets me REALLY high. This vape gets me STOOOOOOOONED! Love the rush after taking a fatty rip. More focused testing tomorrow. Been all over the map. Tomorrow, the extremes. How low can you go , & how how hot can you take it!

 

[Hogni]

Bad boys!!
You are making me so eager for my Sup3 coming to Germany next week!!

 

[Tommy10]

Processed in Miami two days ago soooo excited

 

[SoDelicious]

Best money spent ever!!

Was going to post this last night, but after 5 bowls I couldn't even keep my eyes open...

I've been throwing in big chunks of nugs and have been getting an even extraction every time!?!?!

Mighty cleaning tool is the perfect size for aluminum bowl also

This vape is definitely comparable to the top desktop units like sublimator, herbo, FP. But portable!

Time for more testing

 

[Morty]

This vape is definitely comparable to the top desktop units like sublimator, herbo, FP. But portable!

It's cool to hear feedback from users like yourself & others who have experience w/ alot of these hard & heavy hitters. I understand the Supreme may not be THE heaviest of the heavy, but from everything I've read & seen, it's up there. And alot of those others units are expensive (NVFP looks tight). The SV3 is $158.20 for the base package w/ shipping! Talk about stretching your dollar. If there's one thing I've learned here at FC, it's that you don't have to spend the equivalent of a car payment or months rent to get a good vape. Although, if you want to, that's cool & definitely not frowned upon.

 

[vapirtoo]

I agree that the Supreme is one of the heavy hitters if not the heaviest.IMHO it is the best bang for the buck and should last forever.
It's the weekend and I'm about to blast off with some very tasty ,no name , Sativa . Micro dosing at 200c for that one hit stupor.
Don't expect me to post much after the hit.

 

[Tommy10]

Landed in Aus on Saturday so going to get a torch tomorrow afternoon. That excited! Going to buy a new bong at some stage too! 12" is on loan and little one I don't think will do it justice!

 

[highasakite]

I haven't posted since I received it, but this vaporizer is amazing! I could echo what almost everyone has said. Strong vapor, but it really doesn't hit me that hard immediately (because of the water filtration - very smooth).. it's almost a creeping up, intense high.

I might come back and say more in a few days, but I have a couple questions.

Does anyone else have a problem with the silicone gasket getting stuck in their bong? Sometimes the bowl will get pulled out from the device, and one time the gasket was pulled off by itself and stuck in the bong. --I just pulled the silicone down even more to try to grip the bowl better - and left a little metal stick out on the bowl. Hopefully, this will help fix both. Just seems like you have to be gentle with it.

Also, can you put it in the refrigerator or freezer to make it cool down quicker? What is the best way to load a new bowl immediately after cashing the last one?

 

[Gray Area]

Yeah, I've had the gasket come off a couple of times, and have done exactly the same as you to combat it. Just leave a little of the tube sticking out from the bottom of the gasket. It still works down from time to time, but this way gives you that extra time to notice, and re-adjust...

A second bowl is the best option for back to back hits tbh, but I've seen myself sucking vigorously through an empty bowl stuck into my j-hook to cool it down (minus sup of course)

I wouldn't stick mine in the fridge/freezer, more for the thermometer 's sake if anything

 

[highasakite]

Instead of getting an extra metal bowl, I got 2 of these that were suggested and many preferred - https://vapolution.com/index.php?app=ecom&ns=prodshow&ref=VAP2-STRAIGHT-BOWL

I just haven't cut them down yet. But even with extra bowls, the silicone washer is too hot to touch even a few mins after heating and inhaling. I could use gloves and be careful lol..Oh, I should have ordered 2 more of the little 14mm washers, so I would have them for the glass bowls (they are a pain to take on and off). Can I order these from Ed - anyone know cost or shipping? Also, if I decide to order another bowl setup from Ed, does it just include the tube and screen - no extra washers?

 

[vapirtoo]

I just pull the hot bowl out using my fingers on the red or white silicone washer. I'm very careful not to touch any metal. The washers do not conduct heat that much.
Hey , highasakite, what temps are you using?

 

[Morty]

@highasakite I believe the cost of the 14mm & 18mm gasket/washers are $2 each. Not sure if shipping is the same price as it was for the vape. And if you order another bowl setup, it comes w/ everything (tube, screen, 14mm & 18mm washers), & I believe it's $12. Just e-mail Ed. Ordered an extra washer each, but have yet to even use the alu stem. Loving the uncut Vapo2 stems. No need for washers. Direct draw will fuck you up!

 

[Buildozer]

....Does anyone else have a problem with the silicone gasket getting stuck in their bong? Sometimes the bowl will get pulled out from the device, and one time the gasket was pulled off by itself and stuck in the bong. --I just pulled the silicone down even more to try to grip the bowl better - and left a little metal stick out on the bowl. Hopefully, this will help fix both. Just seems like you have to be gentle with it.

If you use the both size gaskets together on a 14mm female joint, there's nothing to get stuck in the joint It's the only way for me.
Here are a couple links..

Function
Setup

 

[vapirtoo]

Morty is on to something that I might of mentioned before; all of the Vapolution 2 glassware slides right into the Supreme.
I've heated an AIWB to about 160c. and had a carbureted hit that was unbelievable.
I've been using the Supreme through a water tool and switching to a straight dry hit has been eye opening.
Very smooth sneaky type hits.

 

[Morty]

Yes. I've been using it like this through the bong & for direct draw.

Fits just fine in my 14mm female pieces. I bet the AIWB would provide cooler direct draw hits. Just tried the alu stem for the 1st couple times w/ both grommets as @Buildozer has/had suggested. The 2 grommets trick worked like a dandy, but not really feeling the stock stem. Much prefer the straight glass stems.

 

[Tommy10]

So I got a propane and butane torch, butane one I can already tell is shit big loud spluttery flame. Propane would have to be held on the block, but great quiet flame. Just one of the nossels with the disposable bottoms. $40 in the soldering section of my local hardware store. Did my check the cost of replacements.

 

[Stu]

Morty is on to something that I might of mentioned before; all of the Vapolution 2 glassware slides right into the Supreme.
I've heated an AIWB to about 160c. and had a carbureted hit that was unbelievable.
I've been using the Supreme through a water tool and switching to a straight dry hit has been eye opening.
Very smooth sneaky type hits.

I need to try this. Now if I can only remember which box my Vapo is in.

 

[Buildozer]

Yeah, I need to get some of those glass stems, I keep forgetting I want some!

 

[Hogni]

Let's wait what efforts of @PeteSeattle will bring....

My S3 arrived yesterday in Germany and was sent to me today. Hope it will arrive until day after tomorrow!

 

[Morty]

Hit it hard @Hogni. Hit it long, deep & hard! Can't wait to see the PS SV3 Gongs.

In my estimation, there is no RIGHT way to use the Supreme. Just a way. A way to get to reefed off your ass. Whatever way you choose. Oh my...
http://fuckcombustion.com/threads/supreme-vaporizer.317/page-71#post-933873

All you NEED is the SV3 & the alu stems. But for those who like to venture off the beaten path a little, this vape can be VER-SA-TILE. Still testing & haven't covered a myriad of other ways to use it. Mmmmm...testing...

Wish I would of gotten this sooner, if for no other reason to of bought these little gems (1 time offering). Oh my my...
http://fuckcombustion.com/threads/supreme-vaporizer-ti-wpa-adapter.21462/

@lazylathe Where you ever able to find a V2 to complete the triad ?

 

[vapirtoo]

I agree that the aluminum stems taste just as good as the glass IMHO, but all of these adaptations just add to the Supreme's versatility.
Yes Morty there are endless was to enjoy our favorite vape.