Herb Grinders

Stu

Maconheiro
Staff member
Why is there never any love for Mendo Mulcher grinders here? Have my eyes on the large 3" 4 piece. Supposed to be tits!
That's been my only grinder for many years now and I still love it. I do have the 2-piece 3" MM as well, but it hardly gets used. I have no desire for other grinders since the MM serves me so well. Perfect grind for me.:nod:

:peace:
 

kungfuron

Member
I have a large Titanium Space Case on the way, I hope it does the trick. It's mostly to grind up my material to make tinctures so I'm not too concerned if it's a little chunky.

Well my SC was on back order so I ended up cancelling the order and now have a Large 4 piece SCS that will come with my Solo II.
 
kungfuron,

od1

Member
Why is there never any love for Mendo Mulcher grinders here? Have my eyes on the large 3" 4 piece. Supposed to be tits!

I think the lower profile of the SLX may not work for me, and the Kannastor is too fine of a grind for my vapes. Hmmmm, wonder if I should try a NON GR8TR Kannastor? I need a coarse but even grind.

Does the Gr8tr with the coarse plate result in a medium grind?
 
od1,

biohacker

Well-Known Member
That's been my only grinder for many years now and I still love it. I do have the 2-piece 3" MM as well, but it hardly gets used. I have no desire for other grinders since the MM serves me so well. Perfect grind for me.:nod:

That's awesome! Would love to know more about your experience, what is the grind consistency/quality like? I awesome medium-fine and quite even? I've heard bad stuff about the owner of Mendo and crappy CS, but that was ages ago. I'm pretty sure its my next grinder!

Does the Gr8tr with the coarse plate result in a medium grind?

I'd say more on the medium to fine side. Depending on the cure of the bud, sometimes the fine plate isn't that much finer than the medium. When I had my Gr8tr solid body, I NEVER used the fine plate. The coarse plate was perfect, but sometimes I yearned for something a little coarser (just my personal preference for the vapes that I use). With the Supreme 3 and Solo you don't really need to grind, but when I do I want it on the coarser side for better airflow and flavour. I also get bad allergies when the grind is too fine for some reason, perhaps more kief gets through screens, etc.

I can't believe how hard it has been to choose/find the right grinders over the years. Recently it's been the Lift Innovations and Kannastor...in the past it's been space case, SCS, and sharpstone.... but never really satisfied overall.

My next grinders will be the Mendo Mulcher as mentioned, SW2, and new sharpstone. I'll probably give space case another shot for nostalgia down the road too.

Gotta love vape accessories and toys! Far too addicting of a hobby!
 

gaseous_clay

Well-Known Member
I was thinking about getting a SCS 3-piece small. I have a Jumbo SCS & love it! Don't even use my SC anymore. Last year they didn't even have a small 3-piece. I asked them if they were out & they replied that they didn't make the 3-piece in small & had no plans to. I was pleasantly surprised to see they changed their mind.
 
gaseous_clay,

InterplanetaryTanner

Interplanetary Development
Manufacturer
Quick and friendly PSA:

ID's 4/20 sale ends midnight tonight. So if you've been procrastinating on picking up a SWII, nows the time to buy for 50% off. Code: ID420 - Tomorrow (4/22) we have 40% off for Earth day. Code: EarthDay2017

If you procrastinate after that, we still got you for 20% off with code: FuckCombustion

ID Tanner
 

Stu

Maconheiro
Staff member
That's awesome! Would love to know more about your experience, what is the grind consistency/quality like? I awesome medium-fine and quite even? I've heard bad stuff about the owner of Mendo and crappy CS, but that was ages ago. I'm pretty sure its my next grinder!
I would call the grind a consistent "medium" as it's not too fine, but not really coarse either. I can't comment on the CS part as I've never had a need to contact them beyond my purchase transactions which went just fine. :2c:

:peace:
 

cobra505

Defined
So I just wanted to post an experience I had with Lift Innovations. I purchased the grinder from a member here on FC. Problem with the Grinder was the damn screen keeps falling out. Cleaned the damn thing no matter what screen keeps falling out. Sent Lift an Email telling them about the issue, they wanted some pics, wanted the serial # told them it was a 3rd party purchase. Lift stepped up to the plate and is sending out a new body for the grinder and it was a 3rd party purchase. Never see that.
 

Aimless Ryan

Came to read about grinders; fucked combustion
I can't believe how hard it has been to choose/find the right grinders over the years. Recently it's been the Lift Innovations and Kannastor...in the past it's been space case, SCS, and sharpstone.... but never really satisfied overall.

My next grinders will be the Mendo Mulcher as mentioned, SW2, and new sharpstone. I'll probably give space case another shot for nostalgia down the road too.

Gotta love vape accessories and toys! Far too addicting of a hobby!

@biohacker I think you may have ASS (Acquisition Syndrome Syndrome).
 

gonzorelli777

Vape virgin
Do we have any UK/Irish peeps in the thread? I am probably going to go with the UK online store VapourTown.com to pick up my Space Case, as the Ebay seller still hasn't responded to my questions. So I'm just wondering if anyone has dealt with VapourTown before?
 
gonzorelli777,

Whissmu

Well-Known Member
Does the Gr8tr with the coarse plate result in a medium grind?

Surely it is already said but I remember it:
The gr8tr has the same teeth in the two plates, as you see in my gr8tr the difference between one and another is in the holes that make strainer, the grinding is very similar, faster and less thick if you use the thick plate, my favorite!
image.jpg


Left ->fine plate
In midle -> plate gross
Rigth -> result grind
 

gonzorelli777

Vape virgin
I think I read recently here but can anyone with an SLX 2 tell me if the o-ring is supposed to be loose? Mine is...

Besides that first run works awesome!!

:rockon:
I don't own an SLX 2 but I've read in numerous places that the lower ring can be removed. SLX recommend that you don't, but it is removable so that's probably why it is loose. Hope that helps man!
 
Last edited:

MoltenTiger

Well-Known Member
I think I read recently here but can anyone with an SLX 2 tell me if the o-ring is supposed to be loose? Mine is...

Besides that first run works awesome!!

:rockon:
I'm pretty sure my top gasket is fixed in place, but from memory on the bottom section on the latest SLX grinders there's a loose gasket that is removable.
It makes it easier to open/close the herb chamber (less twists with it in place), mine never came with it though, and the difference is minimal (about 1 revolution, 2.5 full rotations w/o g., 1.5 w/ g. to open/close). There's been a couple of times I'd wished for quarter turn locks, but mostly and especially when there's herb in it, I'm happy to crank it a few extra times to get to the goods and twist it back up to a lock stop knowing it's secure until I open it. When I was using one of the newer ones I don't feel like it snaps shut as nicely with the gasket, though I feel like I'd use it if I had one.
It also makes the grinder more symmetrical, and a little taller
 

cybrguy

Putin is a War Criminal
Well, I really wanted that SLX I had in a cart for days and days, but my 420 budget was completely busted by DynaVap. Oh well, another day... ;)

Awwww fuck it. The cart price was still good so I just went for it. Whats money when you can have toys... (And folks wonder why I'm single...) (I blame you, @Shit Snacks ) :cool:

Added: Just to be clear, I blame SS for busting my budget and getting the SLX, not my being single... :rofl:
 
Last edited:

natural farmer

Well-Known Member
I just bought a Kozo grinder on Amazon. It looks pretty, has a good grip, has good reviews, is on sale, and you can optionally leave out the kief catcher. :clap:

https://www.amazon.com/gp/product/B06XHXY6PR/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Hey! Interesting find! :tup: This guy has similar teeth to the SCS!!! Should do a good job! Too small holes though I think...

And probably rebrand of Chinese origin? There 's another one...
https://www.amazon.com/Magnalis-Tob...6WLGGCWB/ref=cm_cr_arp_d_pdt_img_sims?ie=UTF8
 

Little Bill

Oldest stoner on FC
Top Bottom