• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

DDave Mod, New DDave Mini Mod & Kit for Arizer EQ/VTower Vapes

Jillybean

New Member
I wasn't exactly sure if this would be the correct thread for this, but since it might be of interest for future developments I decided to post it here.

From what I understand the EQ doesn't work too well with concentrates since the heating element is below the bowl. So everything that goes beyond a little bit of wax packed with some herb will cause oil to drop onto the screen and the heating element.

Now, I don't think such a piece exists, but do you think the following design might work?

eqconcentrzojsz.jpg


The "dish" that holds the concentrate would be heated by the rising air. The dish should be as close to the heating element as possible. This would mean the concentrate in the dish would be heated by a mixture of conduction and convection.

It's nothing serious, just a thought on what might make the EQ a bit more suitable for concentrates. Maybe this design wouldn't work at all, that's why I thought I'd just put it out there.
 

Laantje

Well-Known Member
@Laantje

Thanks for the kind words!

Small Flat Rate Shipping to Europe is $35USD. For now, I absorb $10 of this, resulting in $25USD.

Kit size is independent of Water Tool Adapter Size.
I can include an 18mm Water tool adapter with a 14mm Kit or...
A 14mm Water Tool adapter with an 18mm Kit.

The kit works with either configuration equally as well. The reason I offer either size is in the hopes that someone who obtains a kit, if they already have a water pipe, that they have either 14mm or 18mm female connector on their pipe. (these are two most common sizes).

Hope this helps, but if more question, feel free.... :rockon:
Thanks for the reply man :)

Could you perhaps send me a PM if you have the 18mm only kit back in stock? Right now I have to save up some money but I'm going to buy one somewhere not too far in the future.

As for my previous question, I feel kinda dump lol. The difference between 18mm & 14mm you meant is the size of the cyclone bowl lol, I thought it was for a specific connector at the end of the tube.

My extreme Q is arriving today but as far as I read the new packages only come with 1 elbow whereas the other one is replaced by a new one specially for the balloon. If I get it right, you offer a straight connector with the kit that fits in the cyclone bowl right? Because then I can just use the stock elbow adapter for my bubbler.
 

DDave

Vape Wizard
Accessory Maker
Thanks for the reply man :)

Could you perhaps send me a PM if you have the 18mm only kit back in stock? Right now I have to save up some money but I'm going to buy one somewhere not too far in the future.

As for my previous question, I feel kinda dump lol. The difference between 18mm & 14mm you meant is the size of the cyclone bowl lol, I thought it was for a specific connector at the end of the tube.

My extreme Q is arriving today but as far as I read the new packages only come with 1 elbow whereas the other one is replaced by a new one specially for the balloon. If I get it right, you offer a straight connector with the kit that fits in the cyclone bowl right? Because then I can just use the stock elbow adapter for my bubbler.
No problem. I have an email list going so I can notify those interested. Can you PM your email address and I'll add you to the list?

The eq kits I offer come with a wand (replaces elbow) and water tool adapter choice of 14mm or 18mm. The complete kit comes with both sizes.

:rockon:
 

DDave

Vape Wizard
Accessory Maker
Hey Vape Family! :wave:

Am very happy to announce that I've received stock of glass pieces.
They are beautiful, same quality as last batch from a new glass supplier.

To this end, I've opened up www.ddavemods.com listings for these kits.


I have a bit of bad news as well. It would seem as of lately that my luck with carriers is not the best. Over a month ago, I reordered more herb loading funnel stock and it may appear that the shipment was lost. I've opened a claim with the carrier and in anticipation of them telling me my packages were lost, I've also ordered another batch of funnels.


If you do choose to order an 18mm Kit now, you will receive an email asking if you'd like the order shipped ASAP or held until the arrival of the funnels.

Best Regards My Friends,
DDave

PS. Questions, comments or if you want to vent about your own shipping experiences, always feel free to reach out to me!

PS#2: If you were on my mailing list, you've also received a copy of this message in email....

Vape On!
 

Laantje

Well-Known Member
Hey Vape Family! :wave:

Am very happy to announce that I've received stock of glass pieces.
They are beautiful, same quality as last batch from a new glass supplier.

To this end, I've opened up www.ddavemods.com listings for these kits.


I have a bit of bad news as well. It would seem as of lately that my luck with carriers is not the best. Over a month ago, I reordered more herb loading funnel stock and it may appear that the shipment was lost. I've opened a claim with the carrier and in anticipation of them telling me my packages were lost, I've also ordered another batch of funnels.


If you do choose to order an 18mm Kit now, you will receive an email asking if you'd like the order shipped ASAP or held until the arrival of the funnels.

Best Regards My Friends,
DDave

PS. Questions, comments or if you want to vent about your own shipping experiences, always feel free to reach out to me!

PS#2: If you were on my mailing list, you've also received a copy of this message in email....

Vape On!

Welp, I did it. I bought the 18mm kit. I forgot mentioning that I have a 18mm bong though. I emailed you about this. In the notes of my order it will say its me, so you can check that.

Hopefully it won't break on its way, I'm excited! I will post a review :)
 

DDave

Vape Wizard
Accessory Maker
Welp, I did it. I bought the 18mm kit. I forgot mentioning that I have a 18mm bong though. I emailed you about this. In the notes of my order it will say its me, so you can check that.

Hopefully it won't break on its way, I'm excited! I will post a review :)
Got your message my friend. Will ensure you receive the 18mm Water tool adapter with your kit.
===========================================================================================
Just received feedback this morning from a previous kit recipient.... Wanted to share it!

(Recipient feedback.....)
"...I was shocked at how little product was required to get a decent effect, and it's literally half of what I was wasting in my Elbow pack basket method with the stock parts."
 

bkpnsux

Well-Known Member
DDave I just placed my order now and am VERY excited! Can't wait to try it out!
I also forgot to specify 18mm or 14mm for water tool but sent you an email. Thanks again and I will also review once received..
 

forkup

Well-Known Member
Not sure I'm posting in the correct place but here goes.

I just wanted to give ddave a shoutout for making the glassware that makes my eq rock. I bought the full kit and have used it daily over a year now.

I managed to break a couple of the bowls but he had replacements when I needed them.

Ddave mods ftw!
 

DDave

Vape Wizard
Accessory Maker
Not sure I'm posting in the correct place but here goes.

I just wanted to give ddave a shoutout for making the glassware that makes my eq rock. I bought the full kit and have used it daily over a year now.

I managed to break a couple of the bowls but he had replacements when I needed them.

Ddave mods ftw!
Thanks for the feedback friend, glad you're enjoying the mod kit!!!

:rockon:
 

Jillybean

New Member
That's awesome, love the idea of a glass filter!

Is there going to be a complete kit again? I currently don't see one listed on your website. Also, is there no herb loading funnel included in v3 anymore?
 

herbivore21

Well-Known Member
Holy shit bro, just noticed your vapor cooler for the vapcap range! I'd love to get in on that, could you provide some info with dimensions/size info? Also any function videos?

Keep up the great work, my friend! :D :leaf:

EDIT: Lol just found your video on the page, oops!

Just out of interest, can it be used with water too?
 
Last edited:

DDave

Vape Wizard
Accessory Maker
Holy shit bro, just noticed your vapor cooler for the vapcap range! I'd love to get in on that, could you provide some info with dimensions/size info? Also any function videos?

Keep up the great work, my friend! :D :leaf:

EDIT: Lol just found your video on the page, oops!

Just out of interest, can it be used with water too?
My friend, no problem.... more pics to follow.

Yes, that cooler can be used with water. But tried it dry and was surprised. Cool and more flavor than when I used water.
 

Laantje

Well-Known Member
Received the kit yesterday! It was here a few days earlier but I wasn't at home, and I was required to pay extra tax for it so they couldn't drop it off at the neighbours.

Tried it out asap, beginning with the whip through water tool.

Maaaan I got way too high, I really like it. But, my Arizer Air somehow gives thicker, mikier clouds which look more satisfying, especially through a water piece. The extreme Q + your mod does make me higher, which is what I want. But it still looks like there is barely any vapor for some reason.

I haven't used the extreme q through a water piece before, so I don't know if I should expect thicker, milkier vape, but I always had the idea that a desktop vape would be able to produce thicker clouds, I see this alot in videos aswell. This does not disappoint me, since for me its all about the high, but I expected more vapor in the first place. Maybe I've got the wrong idea though.

I'm using the wand, the 18mm f/f adapter and the 18mm water piece adapter all connected with the included tube. Is it perhaps better to use the stock tube instead?

As for the balloon, which I mainly use the extreme q for lately, it is perfect! Damn that thing goes full of vapor with your mod, it amazed me! Got me knocked out too, exactly what I wanted!

I am very satisfied, thank you very much! I guess I still have to figure out how to use the extreme q the best way, but so far so good! Will recommend this mod to people.
 
Top Bottom