Ed's WoodScents Log Vape - Ed's TnT

starvingmusician24

Well-Known Member
I tell you I'd like to post pics but my Paranoia is off the charts. It took me forever to create a profile haha. But I'm thinking I have a power supple issues as well. I've had it heating for a hour and a half now. It's hot to the touch but not hot enough to vape. I'm trying it in my other log set up to see what happens. @Ed's TnT this thing looks amazing bro good job. Using my other set up I can already tell it's warming up quicker than T-minus 5 minutes to lift off
 

Ed's TnT

Woodsman
Manufacturer
@starvingmusician24 My man lets work on eliminating electronics, how bout running it straight from wall adapter to unit. See if this way gets sit hot pls sir. If so then put the temp control in then to unit. I just heard from @mephisto that his right angle was bad, running straight power supply to temp control is was pushing 12 volts to the unit.

Omgosh omgosh omgosh, hang in there we will get right.
 

NickDlow

Log Hog
i2dVT6I.jpg


Here's my VC/WS stem collection. Full disclosure I repurposed a couple stems I already had. Don't forget your Ed's TnT stems with SS bushing fit too! I have a few of those as well but figured I'd keep it simple and just use the VC tipped stems.
 

SSVUN~YAH

You Must Unlearn, What You Have Learned...
i2dVT6I.jpg


Here's my VC/WS stem collection. Full disclosure I repurposed a couple stems I already had. Don't forget your Ed's TnT stems with SS bushing fit too! I have a few of those as well but figured I'd keep it simple and just use the VC tipped stems.
Dude... disgusting! :cool: I remember a certain Ed's tipped Amboyna Burl that goes insanely well with that Omni. :bowdown:Thanks for the booty shot, I've been curious about the connection point. :tup:
f5OgMBA.jpg

Just unpacked a present to myself. Isn't it beautiful and @Ed's TnT is adding a lot to the package. I even got some lemon aroma therapy oil. Be careful Ed because the lid was lose and some oil dribbled out mainly on the packing paper. I don't think it got on anything important. I'm heating up my unit now. Thought I would send out a pic.

How long to approx heat up?

Edit
Where do the orings go?
OMG! That's quite a score, the Solo and Nano have to be as jelly as me! The orings go on the Ti tip.
Here go....I am getting a badass crow image from the picture, or perhaps that is the performance check kicking in...
.
0aLvzuv.jpg

That's incredible! I definitely see the bird, but I also see a girl (or a cartoon mouse) on the right and the bird is her hair. Or maybe I'm just really baked? :shrug: I know one thing for sure, that's quite the conversation starter and a gem of a WS! :rockon:


Don't be shy post these beautiful creations! :peace:
 

sixstringsmash

Well-Known Member
i2dVT6I.jpg


Here's my VC/WS stem collection. Full disclosure I repurposed a couple stems I already had. Don't forget your Ed's TnT stems with SS bushing fit too! I have a few of those as well but figured I'd keep it simple and just use the VC tipped stems.
I apologize if this is getting slightly off topic but I just have to ask this real quick. @NickDlow besides that amazing WS and those stems that table is outright insane. It looks like one huge slab of afzelia burl or something. What is that/where did you get it? I must know.
 

SSVUN~YAH

You Must Unlearn, What You Have Learned...
I apologize if this is getting slightly off topic but I just have to ask this real quick. @NickDlow besides that amazing WS and those stems that table is outright insane. It looks like one huge slab of afzelia burl or something. What is that/where did you get it? I must know.
It's one fine wood turner, I know that's for sure. ;)
 

NickDlow

Log Hog
I apologize if this is getting slightly off topic but I just have to ask this real quick. @NickDlow besides that amazing WS and those stems that table is outright insane. It looks like one huge slab of afzelia burl or something. What is that/where did you get it? I must know.

It's actually very on topic lol. That's an Amboyna Burl slab that the man himself @Ed's TnT made for me a little bit ago. I freakin love it!
 

IAmKrazy2

Darth Vapor
Ed got back to me with a quickness with my tracking. Expcted delivery date was today, with no update since the original dropoff. My guess is either a weather delay or USPS missplaced the damn package. Hoping for no later then Friday as it would be my best day this week to test test test.

Cheers all. Thanks Ed.
 

SSVUN~YAH

You Must Unlearn, What You Have Learned...
Ed got back to me with a quickness with my tracking. Expcted delivery date was today, with no update since the original dropoff. My guess is either a weather delay or USPS missplaced the damn package. Hoping for no later then Friday as it would be my best day this week to test test test.

Cheers all. Thanks Ed.
ndrlp.jpg
 

Vapor_Eyes

taste buds
Here go....I am getting a badass crow image from the picture, or perhaps that is the performance check kicking in...
.
0aLvzuv.jpg
That's a beautiful WoodScents, I like the rug too. There's definitely a badass crow on there, and possibly more...

That's incredible! I definitely see the bird, but I also see a girl (or a cartoon mouse) on the right and the bird is her hair. Or maybe I'm just really baked? :shrug: I know one thing for sure, that's quite the conversation starter and a gem of a WS! :rockon:
Thats funny, first thing I thought of was you and your honey badger. Then I looked at the picture and saw a ninja on the right with a crow hat, or perhaps the crow is on his left shoulder.

I love these beautiful pictures everybody, let's keep them coming! :tup: :D
 

little maggie

Well-Known Member
vCM2T67.jpg

Cq4HWEj.jpg


Quick question for those who have theirs. Mine arrived and is quite beautiful. I haven't tried it yet. The central metal post on mine is quite wobbly compared to my HI or UD. I think mine came with an extra metal piece to slide over the central post because I don't see it in any pictures. When it's on, it looks like the post on Vape Dr's post. But either way, when I put a stem on it the stem tilts to the side unless I hold it in place because of the wobble. And if it's not leaning against the edge- as in when I hold it- the stem won't stay on without being held on. It seems like the stems aren't deep enough to stay on. Is that just the way these are designed or is mine unusually wobbly?
 
Last edited:

phattpiggie

Well-Known Member
Accessory Maker
@CarolKing the o rings are spares for the Ti tip, they can be a bit fiddly to change.
Here's one of mine, the red ring is a reminder to myself that its a used tip, yours will be all black.
fRdEBG1.jpg

When you want to remove them I've found it's best to start with the buffer ring, red in this case, first.
It will roll right over the others, the next ones need to be pinched and squeezed up slightly to form a pucker.
A cocktail stick or similar, hat pin, pushed into the pucker will help you to then roll the next one off.
Here's how I get the pucker on another version of the tip.
Put them back in reverse order, it's easier to roll a ring over a ring than a groove.
RBuxbQN.jpg


@little maggie That's not right something has come loose, Ed will be getting out of bed in an hour or so and he'll be in touch.
You know he's going to be disappointed to see this. He's known for great CS so he'll be all over it to remedy the situation.
I wouldn't power it up.
 

NickDlow

Log Hog
Dude... disgusting! :cool: I remember a certain Ed's tipped Amboyna Burl that goes insanely well with that Omni. :bowdown:Thanks

Oh yes I most definitely still have that beauty!

vCM2T67.jpg

Cq4HWEj.jpg


Quick question for those who have theirs. Mine arrived and is quite beautiful. I haven't tried it yet. The central metal post on mine is quite wobbly compared to my HI or UD. I think mine came with an extra metal piece to slide over the central post because I don't see it in any pictures. When it's on, it looks like the post on Vape Dr's post. But either way, when I put a stem on it the stem tilts to the side unless I hold it in place because of the wobble. And if it's not leaning against the edge- as in when I hold it- the stem won't stay on without being held on. It seems like the stems aren't deep enough to stay on. Is that just the way these are designed or is mine unusually wobbly?

Also on the wooden WonG, your Ti tip is on the wrong end. It belongs on the larger side so you can insert the WonG into your glass
 
Last edited:

Copacetic

Somewhere North of The Wall

Absolutely love that 'knot hole' yours has got going on there Dr V, gorgeous.

Sorry for your teething troubles @little maggie, but I bet Ed sorts you right out :tup:.
Wouldn't be a vape launch without the odd little issue to correct, am i right?

Is that a bog oak Maggie?

My tracking is FUBAR too @IAmKrazy2, no worries though, in my experience tracking rarely works regardless of which company or country is involved.
In my case country TO country NEVER bleedin' works :shrug:
 
Top Bottom