Firewood Vaporizer

almost there

Well-Known Member
WOO HOO!! Ordered one today! Can't wait for it to get here. My FW3 is a little tore up from being too rough with it.
Out of curiosity did u order it from the firewood site? It's been out of stock every time I go on the site. Just my luck I suppose, enjoy it :)
 
almost there,

SavageCore

Well-Known Member
WOO HOO!! Ordered one today! Can't wait for it to get here. My FW3 is a little tore up from being too rough with it.

Really? What time was that? I have a monitor checking the page for changes and didn't see anything...
 
SavageCore,

blackbur

Well-Known Member
Does FW replenish inventory early Friday mornings?
I think that was the case when I nabbed my fw3.
Def want to cop the fw4.
 
blackbur,

powderfinger76

One way hitter!
Wiiiihaaaa! I ordered mine this Friday! I mailed him in the morning and he wrote that he would restock at 4 est, so i refreshed the page 50 times or something, i also ordered a cooling unit and a charger plus a couple of capsules. I own a 3 but it's acting a bit strange..this is going to be fun!
What batteries do you guys use?
I bought LG HG2!
 

ren.dnb

Well-Known Member
Wiiiihaaaa! I ordered mine this Friday! I mailed him in the morning and he wrote that he would restock at 4 est, so i refreshed the page 50 times or something, i also ordered a cooling unit and a charger plus a couple of capsules. I own a 3 but it's acting a bit strange..this is going to be fun!
What batteries do you guys use?
I bought LG HG2!
Hahaha!!

Thats what I did. I emailed him on Wednesday and he replied Thursday telling me about 4pm EST on Friday. Sat there on Friday and refreshed just like you. Around 4:15 - the buy button popped up and ordered my wax buff FW4. They weren't up for long. I was curious how long they would last. At 4:30pm, sold out again, but thats when I checked it.

As far as batteries go, I was going to use one of my Samsung 25R's, but I'm going to buy a pair of LG batteries just for this. Doing that so they're a different color and I don't mix them up with my e-cig married pairs.
 

P.A.M.

Vapo Rising
Hey FC, I noticed on firewoods website ; photo on main page, the Firewood on the right as a smaller glass stem that comes out from the side of the unit , not a bigger stem from top like most firewood I seen. Anyone have one of those or info on it please ?
 
P.A.M.,

ren.dnb

Well-Known Member
Nitecore is a good little charger if you
Hey FC, I noticed on firewoods website ; photo on main page, the Firewood on the right as a smaller glass stem that comes out from the side of the unit , not a bigger stem from top like most firewood I seen. Anyone have one of those or info on it please ?
Yeah, thats the optional cooling unit. Makes the vapor path longer if you like cooler vapor.
 

Shieldsab

Well-Known Member
I got my batteries, finally. Trying out the FW4 now. I like it. The vibration feedback was a great inclusive design decision. I've never had so much info about the exact status of my vape before, as most display battery levels visually even if they may vibrate at power-up.
 

powderfinger76

One way hitter!
It says like this at usps website:

Your item has left our acceptance facility and is in transit to a sorting facility on February 28, 2017 at 6:33 pm in BOSTON, MA 02205.

Shouldn't it be checked in at some airport before it leaves for Sweden??
Or am I totally wrong?
 
powderfinger76,

Shieldsab

Well-Known Member
It says like this at usps website:

Your item has left our acceptance facility and is in transit to a sorting facility on February 28, 2017 at 6:33 pm in BOSTON, MA 02205.

Shouldn't it be checked in at some airport before it leaves for Sweden??
Or am I totally wrong?
Sometimes USPS gets lazy and doesn't scan a package. You can try checking it on the site for the Swedish postal service, as tracking information should show up there if it has left the US.
 

PPN

Volute of Vapor
The FW4 I bought from the Classdifieds is arrived today. I'm IMPRESSED by all the progresses made since the FW1.0 and the 2.1 I previously owned. Never tested the 3 but the version 4 is amazing, the efficiency was already great with the previous versions but here it was pushed over the limit, I can't believe how much thick tasty clouds I get using setting 2 and a 0.05 load at max. It didn't come with a cooling unit but I don't see any need for that, it's so smooth!

My first use wasn't so nice cause the bottom of the capsule was quickly charred, I pushed the screen a bit up and didn't experienced anymore charring, although it minimizes the load.

Any tips for water tool use, please? I wasn't able to get some milky hits...dry that's ok but not using a water tool with...

And without to mention how small it is....and how beautifull is the wood...
 

antonio45

Well-Known Member
I've tried that but no luck

@firewood

Have you received your unit yet?
I was just at my customs office, they asked what's inside the package. I stupidly foolishly answered that it's an electronic cigarette. They told me ecigs are banned... I told them it's an aromatherapy device.
Now they need to inspect the package and decide if it's an ecig or not. I should know tomorrow.
God, I hate this redtape...
 
antonio45,
  • Like
Reactions: vapen00b

ren.dnb

Well-Known Member
I just want to say that Marc has some AWESOME customer service. I received my FW4 last Thursday. All giddy I loaded it up, popped in my 18650, set it to setting 2, and took a hit. Combustion! Ok, so maybe I was drawing a little too light. I tried it with a harder draw. I would still get some sort of combustion or scorching of my load.

Worked with it all weekend, and stayed in communication with Marc. After some lengthy testing, and lots of troubleshooting with Marc, he determined my FW4 needs to be sent back for re-calibration. Whats going on is its literally burning every load regardless of how I draw. We made sure the unit had no temperature offset as well. Seems like its just a hair bit hotter than it needs to be on the 0 offset setting.

Really glad Marc is on top of things like that, and he'll stand behind his product. Can't wait to get it back as I love the form factor and that it uses an 18650. So much easier to keep it fully charged! Now... if the damn thing will quit combusting on me.
 

vapen00b

Many vapes & accessories. Always happy to help
Have you received your unit yet?
I was just at my customs office, they asked what's inside the package. I stupidly foolishly answered that it's an electronic cigarette. They told me ecigs are banned... I told them it's an aromatherapy device.
Now they need to inspect the package and decide if it's an ecig or not. I should know tomorrow.
God, I hate this redtape...

Oh shit, man... Really sorry to hear that. What country are you from..? That sounds bad. Best of luck - fingers crossed for you!
 
vapen00b,

antonio45

Well-Known Member
Oh shit, man... Really sorry to hear that. What country are you from..? That sounds bad. Best of luck - fingers crossed for you!

I'm from Poland and I assume it has to do with a recent ban of ecig online sales.
It was my mistake, I used the word "electronic cigarette" to describe the contents of the package, I thought it would sound better than "herb vaporizer" ;) I later corrected myself and told him it's an aromatherapy device, but he already got an idea in his had that it's a banned item and he needs to inspect it.
 

Shieldsab

Well-Known Member
Thought I'd jump in with a quick update. The FW4 has become my daily driver now that I've figured out draws and where the temps need to be. I absolutely love this vape. The only thing I don't like as much is reloading capsules, but even then it's not too bad. And the benefits are worth it. I can use a battery in a day if I really try, but more often it's lasting me a day and a half, or even 2 days. I'm rotating 2 batteries and have never had to reach for a third. I use it on temp 3 with the boost at 4, without the CU and with no water. I'm not sure what the clouds or ABV look like, but I know it's definitely working. Very pleased with this purchase.
 
Top Bottom