Surf Monkey

Well-Known Member
My Mighty has to go in for an RMA and I decided to get one of these as a backup during the repair process. I've dabbled with conduction vapes quite a bit. Had an original Iolite, a Magic Flight, an original PAX, an Arizer Air... none of them have been as satisfying as my convection vapes. The Mighty is my daily driver and I have a Grasshopper too, but the Hopper's bowl is too small to be of much use to me.

Anyway, having read lots of positive reviews on this unit I decided it was worth a shot. Picked it over the Firefly 2 and the PAX 3 for several reasons, not the least of which is the replaceable battery. I use a dual 18650 nic vape, so swapping batteries is trivial.

Looking forward to trying it out. Should be here by the end of the week.
 

iqtester

New Member
*Update on my first IQ pack*

(Packed full and tight)

Session 1:
Smart path 1 for 2-3 small hits. I was head changed and where I wanted to be and powered the IQ down. After powering the IQ down, I continued to puff to take the remaining vape out of the oven and opped the bottom cover quick to release the air in the oven.

Session 2: Same as session 1

Session 3: Same as session 1

Session 4: Same as session one with the 3rd puff being a power boost to see what it could do.

Session 5: Smart path 2 with a friend. 3 hits a piece. Unit was powered on for about 3-4 mins.

Stirred herb and noticed it is almost spent but still has some life left.

Session 6: 2 small hits and powered down immediately when finished. Did not draw excess vapor or open the case this time to cool the oven.

When I stirred, I noticed the bowl is almost spent but still has some more usage. I haven't gone above Smart Path 3 other than the one time I used boost mode for one hit. I will probably use Smart path 3 next session if the circumstances are right...don't want to over medicate and I will reiterate, I have a low tolerance and prefer to micro dose.

Session 7: 4 hits on smart path 2. Hits are getting less powerful, although definitely still effective. I took one more hit than usual to make up for the inevitable decrease in strength. I am going to keep going with this first pack to see how far it will go taking ultra short sessions. Please keep in mind I am not looking to get really stoned or anything. Just a quick head change before working out to make it more enjoyable. I think at this point I could still fire this thing up on smart path 4 and get a group session successfully. I will keep hitting this the way I have been just to see the stamina of a full pack. Even though I bought the spacers, I may keep using full packs because it is working extremely well for my application. I don't mind that it is getting less powerful as I am not looking to get too crazy. Anyways, thought I would keep this ultra short session test going until the first pack is cashed. Very happy with the results so far as I have gotten well over 20 hits out of this thing so far including a small group session with a friend.

Session 8: Ok, the bowl is cashed. Smart path 3 for 4 hits and didn't feel the effects too much. Full battery while in this session. I am so impressed with this pack that I may never use the spacers with the style of vaping I prefer. The spacers may come in handy when I am session vaping with a friend or two and want to expend the entire pack. Love this unit!!!

Peace!
 

almost there

Well-Known Member
All my reading on this thread or any other has lead me to believe an external charger is suppose to charge faster than the IQ. My D2 I just got from IMR is behaving very strange and I just want to see if I was misinformed. The right slot on the D2 performs a full charge in 3.5 hours and the left slot takes 6.5 hours or more. When I contacted IMR twice, Jason wrote back that this was normal and wouldn't elaborate on why this is the case. just doesn't make sense why the same drainage on a battery would charge at such different lengths, I charge one battery at a time so the discrepancy is too big to discount. I did this 4 times in total with the same results, can someone help please?
 
almost there,
  • Like
Reactions: BigJr48
Been lurking while reading the whole thread. I thought I would give you my thoughts on the IQ. I have a few vapes after I starting vaping with the original Iolite, I don't miss butane, that thing was like a little bomb now that I look back at it, also have two Pax 1's and a Pax 2, I picked up the IQ about 2 weeks ago. I have exclusively used a Pax as my daily driver / only means of consumption for the last 3+ years since the Pax 1 was first released.

The packaging and build quality of the IQ is on par with the Pax, at least the exterior. The interior of the mouth piece area in the IQ is a little cheap looking and seems just a little bit flimsy for a $275 unit. I was happy that the unit came with so many good quality accessories for cleaning and charging. The gift of the carry can was nice but a second battery would have been a better gift.

Now that I have the IQ, I still find myself reaching for my Pax 2 a lot of the time. I really want to like the IQ but I feel the I get inconsistent results from it. I can pack one bowl get great results and the pack the same amount of the same herb and get almost no results or very thin vapor. Most of the time I can get some results but not without fiddling with it, stirring it and temp changes ect. I am packing full bowls and using a firm pack. Let me know if you have any tips for me. I don't seem to every have this issue with the Pax.

I have tried a range of grinds from very coarse to very fine and feel that a medium fine is the best balance between draw and vapor production. With the IQ if you grind too fine you get some bits of herb in your mouth when you draw.

In term of efficiency again have to give the edge to the Pax 2. Even on low temps 1-2 petals, I get consistent even brown AVB. I do stir between sessions with both the Pax 2 and the IQ, but the IQ no matter how much a vape or how high the temp goes with IQ the AVB is not as dark. I seem to get more hits as well with the Pax 2 for the same amount of herb. I find I can also get ok results with a less than full pack for a short session with the Pax 2 but have a hard time getting similar results with a small pack in the IQ. Spacers may fix this.

I find that I rarely take the IQ out of the house as I'm not sure that it will work consistently without a lot of stirring or messing with it, which ruins the stealth and can be difficult in the dark. The IQ is also kind of more complex to use than the Pax. As far as ease of operations, Pax has just one button and it only requires 1 press to turn on/off, opposed to the 5 quick presses on the IQ.

In terms of stealth there is no question the Pax 2 is better, at least with 10mm mouth piece on the IQ. Size wise the units are similar volume but dissimilar shape. I feel that the Pax still feels smaller, more easily concealable, and easier to use discreetly in a public place. The Pax is certainly lighter too.

IQ has better flavor, no question about that, that first hit is perfect. The flavor seems to stick around for a few more hits and at higher temps with IQ too. I don't put anything in the flavor chamber anymore after doing it once. I found even a small bud restrict the airflow too and didn't really improve flavor IMO. I don't personally have any issues with the flavor of the Pax as long as you keep is clean so the resin doesn't go rancid inside the unit.

As far a cleaning goes the IQ is not hard to clean but it’s harder to clean then the Pax. The IQ has lot of little parts to take out of the unit. In some ways this is a plus as you can clean almost the entire air path by soaking in ISO and removing all the residue. In my unit the flavor chamber falls out when you open the mouth piece door. It never seems to lock into place I think by design but not sure. The main issue I have with cleaning the IQ is the area under the oven past the rubber gasket. Resin seems to build up in this area and there is not great way to clean it. I use q-tip with ISO and the brush suppled with the unit, but it never gets fully clean and overtime I think it will affect the flavor as this resin goes rancid. Let me know anyone has found a good tool or way to clean this area.

The removable battery was one of the main selling point for the IQ, but the battery doesn't last that long. You have to have at least two batteries with you just to equal the battery life of a fully charged Pax 2. I also have a 20+ 18650 batteries for my scuba lights but they don't fit in the IQ:doh:, this is not the IQ's or Davinci's fault but it is frustrating. The Pax 2's battery can get me thru a week without recharging but it would be nice if it was hot swappable or if the unit had a USB charging port like the IQ.

The other main selling point for the IQ over the Pax 3 was the "smart paths" which sounded cool on paper, but I rarely use now, unless I'm with friends that don't know how to use the IQ. I find it easier to adjust the temp manually as the vapor thins, more efficient too as sometimes there are still good hits at the lower temps left, but with the smart paths the unit just keeps rising the temp indiscriminately.

The IQ heats up pretty quick, I haven't timed it or anything but 45-60 seconds to get to 370 degrees seem about right. I usually give it another 15-30 seconds to build up the vapor before hitting it. Pax 2 may heat up just a little bit quicker but it’s not an appreciable difference. I also like that the Pax 2 goes into standby mode after 20-30 seconds when not in use, and turns off on its own quicker than the 10 mins on the IQ. I have forgotten the IQ on and came back to a wasted bowl.

I mainly stick to fairly low temp vaping 350-390. If I use a smart path I mainly use smart path 1-2 I do use 3 occasionally. I have to say even on smart path 3 it is still enjoyable both from a taste and vapor temp standpoint, I wish I could say the same for the Pax 2 on the 3rd petal heat setting. I used path 4 with a someone who combusts this weekend and they felt the vapor was too hot which it is, but the clouds were huge, I'm sure if you are running the vape thru water path 4 is great.

I was hoping that the boost mode would allow the unit to be used as a one hitter which it would if you could set an upper limit for the temp on the app (Please add this to your next update @Davinci_vaporizer)

The IQ is a good unit but it needs some fixes / tweaks. If you're a session vaper and enjoy 10-20+ mins sessions to casually vape a full .3g bowl you will be extremely happy with the IQ. I think someone else on this thread said it best in an earlier post. The IQ is a good vape if you want to GET high, but the Pax 2 will remain my choice for when I want to BE high. I typically a take a few hits over 3-6 mins then put it away for later, I still feel that the Pax 2 works better for this style of vaping. I glad I have both units but also kinda wish I have gotten the Pax 3 just as I think it would suit my vaping style better.

Overall I would put like this, the IQ is a top of the line Android phone while the Pax is iPhone. They both do their job and offer a good user experience, IQ/ Android phone may have some additional features that the Pax / iPhone doesn't, but there is something to be said about just working and simplicity of the design of the Pax / iPhone.

Pros:

• Exterior build quality on par with the pax. Interior battery compartment looks a little cheap but the unit feels good in your hand.
• Ceramic vapor path gives best in-class flavor.
• Removable vapor path makes those parts easy to clean.
• Hot Swappable battery that isn't property.
• USB charing.
• Integrated stir stick (why doesn't every vape have this) Brilliant.
• Innovative display

Cons:

• 5 Presses turn the unit on and off.
• Bowl is huge and micro loads are not effective, there are spacers but hard to get where I live in the islands.
• The adjustable pearl is a great idea very poorly executed I stoped messing with it after hearing others broke their posts or lost / broke their pearls.
• Hard to unload especially when hot, watch that pearl it burns me almost every time.
• Lots of small pieces to fall out and get lost or broken in the wild.
• Putting herb in flavor chamber restricts the draw too much and really didn't improve the flavor
• Area under the oven past the gasket holds tons of resin and is nearly imposable to clean. I think it will over time effect flavor as this area never gets truly clean.
• Flat mouth piece is nearly useless and the 10mm adapter doesn't allow the unit to sit upright without being removed to load unload or stir. could be fixed with a shorter 10MM mouth piece as suggested by another user earlier in the thread.
• Flavor chamber falls out when you open the mouth piece door and never seem to lock into place (I think by design but not sure)
• Battery door latch can be difficult to get to lock at times.
• Battery life is short and battery indicator is wildly inaccurate. They say 50 mins but it’s more like 30-40 mins of run time with real world use.
• When using the IQ with the app your phone keeps playing the tritone sound with no way to silence it without silencing your whole phone.

Suggestions for @Davinci_vaporizer:
• 5 Presses turn on or off come on. How about two long presses?
• Add a user defined upper temp limit for boost mode. this would make a one hitter mode Pretty please fix in the next update @Davinci_vaporizer):love:
• How about a hit counter in the app. It would be easy to do, I can see the temp drops slightly on the draw when looking at the app dashboard then the temp rises again it could be recored on the app and give you stats for that bowl.
• Allow unlimited temp adjustment for smart paths currently limited to 3 adjustments. Also allow smart paths that at less then 10 mins.
• Option to silence sounds phone plays when getting to temp when using the app. :goon:
• Is it possible to reset the counter for the smart paths?
 

BigJr48

Well-Known Member
All my reading on this thread or any other has lead me to believe an external charger is suppose to charge faster than the IQ. My D2 I just got from IMR is behaving very strange and I just want to see if I was misinformed. The right slot on the D2 performs a full charge in 3.5 hours and the left slot takes 6.5 hours or more. When I contacted IMR twice, Jason wrote back that this was normal and wouldn't elaborate on why this is the case. just doesn't make sense why the same drainage on a battery would charge at such different lengths, I charge one battery at a time so the discrepancy is too big to discount. I did this 4 times in total with the same results, can someone help please?
That's not normal for the D2, contact NiteCore maybe you'll get a replacement.
 

disGRUNTled

Well-Known Member
Grinded up some Headband threw it in the IQ .Watching Grind Mode Cyphers on Youtube.
yj2TcWA.jpg

tijbo3l.jpg
 

Donla94

Member
Hello everyone,

I'm quite excited to share with you that I have decided to purchase a DaVinci as my first vaporizer after getting my first "big boy job". I decided to treat myself for all the hard work :D A majority of my friends have the Pax so I wanted to try something different, and after researching extensively I decided this one had the most added value.

However, I still would like to know your feedback regarding the NECTAR COLLECTOR® HONEYBIRD CORE & IQ GLASS SPACERS... I don't like limiting my options and would consider buying a different 10mm glass attachment if there are better ones on the market at a competitive price. Also, I see a lot of talk about these spacers and have no clue what they do besides having a prepacked amount ready. I read that some people put the spacer in the actual oven??? I would appreciate any feedback you have on these accessories.

Please & Thank You!
 
Last edited:

almost there

Well-Known Member
That's not normal for the D2, contact NiteCore maybe you'll get a replacement.
I gave nitecore a call and the rep there said it's not something he has heard of before but it's working normal:shrug:. Jason from IMR wrote back again seeming peeved that he had to repeat the vague answer he gave me once before. Anyway I'll just deal with it. Not worth all the stress of getting into a long drawn out fight over something that costed me $15. Just a little disappointed bc a lot of people on this thread recommends IMR, I would have figured they would be a little more concern towards an inquiry about something that can be dangerous. Thanks for answering my question @BigJr48 :wave:.
 

WakeAndVape

VapeLife X
Hello everyone,

I'm quite excited to share with you that I have decided to purchase a DaVinci as my first vaporizer after getting my first "big boy job". I decided to treat myself for all the hard work :D A majority of my friends have the Pax so I wanted to try something different, and after researching extensively I decided this one had the most added value.

However, I still would like to know your feedback regarding the NECTAR COLLECTOR® HONEYBIRD CORE & IQ GLASS SPACERS... I don't like limiting my options and would consider buying a different 10mm glass attachment if there are better ones on the market at a competitive price. Also, I see a lot of talk about these spacers and have no clue what they do besides having a prepacked amount ready. I read that some people put the spacer in the actual oven??? I would appreciate any feedback you have on these accessories.

Please & Thank You!
welcome.

anyway the glass spacers do go inside the oven to reduce the volume of material needed to pack correctly

the honeybird core is useless without the threaded 10mm adapter unless you get a silicone 14mm universal adapter from delta 3d studios .

as far as performance with the bubbler, it works well and adds cooling without it being a huge volume of water...the more water in the bubbler, the more it takes away from the taste.

I gave nitecore a call and the rep there said it's not something he has heard of before but it's working normal:shrug:. Jason from IMR wrote back again seeming peeved that he had to repeat the vague answer he gave me once before. Anyway I'll just deal with it. Not worth all the stress of getting into a long drawn out fight over something that costed me $15. Just a little disappointed bc a lot of people on this thread recommends IMR, I would have figured they would be a little more concern towards an inquiry about something that can be dangerous. Thanks for answering my question @BigJr48 :wave:.

that sucks...but did you try the other modes on the charger? i know the d4 has two rapid charging slots and there is a mode where you can charge them on a faster voltage (i believe)

there is also a mode that tries to charge the batteries as a married pair and will slow down charging times if the batteries are not at the same level of depletion
 

almost there

Well-Known Member
Still waiting unfortunately. They responded to me on reddit, but no reply once again after sending my info.
I'm sorry man, must be driving you nuts. I completely understand that feeling of seeing hope in the horizon but it's just not within reach:\. I hope things work out soon for you, can't understand why it's taking so long. Is it too personal to ask what the problem with your unit is?

welcome.

anyway the glass spacers do go inside the oven to reduce the volume of material needed to pack correctly

the honeybird core is useless without the threaded 10mm adapter unless you get a silicone 14mm universal adapter from delta 3d studios .

as far as performance with the bubbler, it works well and adds cooling without it being a huge volume of water...the more water in the bubbler, the more it takes away from the taste.



that sucks...but did you try the other modes on the charger? i know the d4 has two rapid charging slots and there is a mode where you can charge them on a faster voltage (i believe)

there is also a mode that tries to charge the batteries as a married pair and will slow down charging times if the batteries are not at the same level of depletion
Ah, so. Thanks @WakeAndVape, I'll give those buttons on the side a few pushes and see. Funny how neither the nitecore rep nor Jason from IMR mentioned that and I specifically asked about that too on my email. Anyway good to know my peeps on FC got my back:rockon:
 
Last edited by a moderator:

Trulukkyphrank

Well-Known Member
Been lurking while reading the whole thread. I thought I would give you my thoughts on the IQ. I have a few vapes after I starting vaping with the original Iolite, I don't miss butane, that thing was like a little bomb now that I look back at it, also have two Pax 1's and a Pax 2, I picked up the IQ about 2 weeks ago. I have exclusively used a Pax as my daily driver / only means of consumption for the last 3+ years since the Pax 1 was first released.

I had also the pax2 as my every day vape and found the IQ better in nearly every category you mentioned ^^

I used the pax2 with pusher but the IQ still works much better also with small loads in my case, and I use it since 2 months now. Maybe you need just some more excercise with the IQ to get satisfied.. Or maybe your unit is defective cause I had NEVER inconsistent results, always much better vapor than with the pax2 (I really loved my pax2, but sold it immediately when I got my new love, no brainer)

The part between the silicone gasket and oven can be cleaned perfect with some qtips, iso and a cotton pad.
First the unit must be still warm from using, than I take a cotton pad with much iso and put in the oven, push it slightly down till the iso rins thru the oven holes into the part between the silicon gasket(cleans also the oven), this take off some resin and make it ready to get swapped by a qtip. The qtips work best when you knick the tip a little bit that they reach all hidden gaps, I make this until the qtips come clean out and then do the whole process from beginning. Heat it up, rins iso thru the oven, push knicked qtips in the silicon gasket tuill they come clean out.. I hope this helps, sorry for my bad english
 

almost there

Well-Known Member
@Vaping-in-Paradise
I don't own a pax or have enough experience with the IQ to offer any advice but I can tell you I had similar problems to your's because my unit had a faulty oven. The inconsistent clouds and not knowing if your unit is gonna work this time or not was exactly what I was going thru. I bought a new grinder and did all kinds of experiments just like you to see if the problem can be resolved. After a month of this fustration I contacted Davinci and they replaced my unit. Got the new IQ less than a week ago and it works great. Consistent clouds at lower temps, longer battery life than what I experienced before, I have no complaints. The spacers are great, a bit expensive IMO but I'm able to load small and not have half used material sit in the oven for half the day.
 

Davinci_vaporizer

Clean First Technology
Manufacturer
@Davinci_vaporizer

I was sent the wrong color davinci iq. Tomorrow will be 1 week since I first emailed customer service. I have not even gotten a reply.after I emailed , I waited 72 hours and then I called customer service and left a message. Nobody ever answers the phone there. Nobody returns calls or emails?! Apparently I'm not a valued customer.

It's redicuolous that People have to sign up for a forum to get help on a product with a 10 year warranty lol.

In comparison, I recently had a problem with my pax 1. I received reply to my email warranty request within hours. And 1 week later they sent me a brand new pax. And this was right when they released the pax 3. Great customer service! I'm sure they were busy but still valued their customer even though it was a pax 1!

So I am yet another disappointed customer with da Vinci. It seems like there are a lot of issues with the davinci and that is why they customer service is so busy?

Not sure what more I can do here to get a reply from customer service. I have a 300$ baby blue paper weight. Kinda wish I could try my new vaporizer but obviously I can't use it and then return it for the color that is on my receipt.

Obviously I want my problem fixed, but also I want people looking for a new vaporizer to hear about issues myself and others are having with the company before buying

Got your DM. See my reply and how we can get this fixed for you!

We'll I've had two sessions with my new IQ and I have to say...This little machine is very very nice!! I like it much better than the Grasshopper i got a couple of weeks ago.... thinking about selling the GH....

Glad you are enjoying it!

Because it's convenient to not have to do that?

I love the smart paths, and the IQ has become my #1...but unlike you, I'm a big session vaper.


^This guy gets it

I received my spacers and Honeybird combo on Friday. These accessories have elevated the IQ to a new height for me, and I was already pleased with my purchase. I've only used the larger spacer so far, and it works great. I use a fraction of what I'd use on a normal load with the pearl extended, and get very satisfying results on Smartpath 3. The hits are very full, and the load is just about spent at the end of the 10 minutes. If one of your complaints about the IQ is the oven size then you need to buy a set of spacers. The Honeybird also works great. Also picked up the carrying case, and am happy with that as well. The best part is I got it all for free thanks to my rewards points.


Glad you are enjoying the vape and your accessory parts. Any other accessories for the IQ that you would like to see?

My Mighty has to go in for an RMA and I decided to get one of these as a backup during the repair process. I've dabbled with conduction vapes quite a bit. Had an original Iolite, a Magic Flight, an original PAX, an Arizer Air... none of them have been as satisfying as my convection vapes. The Mighty is my daily driver and I have a Grasshopper too, but the Hopper's bowl is too small to be of much use to me.

Anyway, having read lots of positive reviews on this unit I decided it was worth a shot. Picked it over the Firefly 2 and the PAX 3 for several reasons, not the least of which is the replaceable battery. I use a dual 18650 nic vape, so swapping batteries is trivial.

Looking forward to trying it out. Should be here by the end of the week.

You're going to love it! Make sure to post about your first session for the other users!

Been lurking while reading the whole thread. I thought I would give you my thoughts on the IQ. I have a few vapes after I starting vaping with the original Iolite, I don't miss butane, that thing was like a little bomb now that I look back at it, also have two Pax 1's and a Pax 2, I picked up the IQ about 2 weeks ago. I have exclusively used a Pax as my daily driver / only means of consumption for the last 3+ years since the Pax 1 was first released.

The packaging and build quality of the IQ is on par with the Pax, at least the exterior. The interior of the mouth piece area in the IQ is a little cheap looking and seems just a little bit flimsy for a $275 unit. I was happy that the unit came with so many good quality accessories for cleaning and charging. The gift of the carry can was nice but a second battery would have been a better gift.

Awesome write up. Haven't seen on that long on here in a while. We will defiantly consider your feedback and suggestions for updates and new products. Appreciate your time and support!

Still waiting unfortunately. They responded to me on reddit, but no reply once again after sending my info.

Hey there!

Double check your messages should be a reply by now.
 

Trulukkyphrank

Well-Known Member
@Vaping-in-Paradise
I don't own a pax or have enough experience with the IQ to offer any advice but I can tell you I had similar problems to your's because my unit had a faulty oven. The inconsistent clouds and not knowing if your unit is gonna work this time or not was exactly what I was going thru. I bought a new grinder and did all kinds of experiments just like you to see if the problem can be resolved. After a month of this fustration I contacted Davinci and they replaced my unit. Got the new IQ less than a week ago and it works great. Consistent clouds at lower temps, longer battery life than what I experienced before, I have no complaints. The spacers are great, a bit expensive IMO but I'm able to load small and not have half used material sit in the oven for half the day.

so I think this is like a proof that @Vaping-in-Paradise has a faulty unit, cause I can clearly say compared to pax, the IQ must be much powerfuller and should give a overall better vaping experience.
 

jay87

Well-Known Member
I've been really enjoying my IQ at lower temperatures. At low temperatures the flavor is really really great, although once you turn the temperature higher flavor degrades very quickly.

I usually start a session at 367F and stay there enjoying the flavor and less harsh clouds. After quite a few draws when I notice the vapor production and flavor slow down then I max out the IQ and finish the load.

I do this because I've noticed that when I start the IQ at a higher temperature like 380F+ the flavor degrades almost instantly.

By keeping the temperature low in the beginning I ensure I get all of the flavor out of my bud before I crank up the heat to roast the herb and blow out plumes of clouds. :science:
 

Scoopster

Active Member
I've been really enjoying my IQ at lower temperatures. At low temperatures the flavor is really really great, although once you turn the temperature higher flavor degrades very quickly.

I usually start a session at 367F and stay there enjoying the flavor and less harsh clouds. After quite a few draws when I notice the vapor production and flavor slow down then I max out the IQ and finish the load.

I do this because I've noticed that when I start the IQ at a higher temperature like 380F+ the flavor degrades almost instantly.

By keeping the temperature low in the beginning I ensure I get all of the flavor out of my bud before I crank up the heat to roast the herb and blow out plumes of clouds. :science:

I do a similar usage pattern. Low and slow to get max flavor then crank it to get every last vapable out of the bud. Also, I often vape solo and when starting out at a higher temp I simply cant keep up with the vapor output of the IQ.

I sense some IQ spacers in my future......
 

Surf Monkey

Well-Known Member
I've been really enjoying my IQ at lower temperatures. At low temperatures the flavor is really really great, although once you turn the temperature higher flavor degrades very quickly.

I usually start a session at 367F and stay there enjoying the flavor and less harsh clouds. After quite a few draws when I notice the vapor production and flavor slow down then I max out the IQ and finish the load.

I do this because I've noticed that when I start the IQ at a higher temperature like 380F+ the flavor degrades almost instantly.

By keeping the temperature low in the beginning I ensure I get all of the flavor out of my bud before I crank up the heat to roast the herb and blow out plumes of clouds. :science:

This is very interesting to me. Low temp vaping on a Mighty is one of my favorite ways to consume. The Mighty can produce decent clouds as low as 340. I'm curious how low the IQ can go and still produce acceptable vapor.

My typical session:

(Note: if my GF is joining me she only hits it at 340, never above, so we start there on a dual session.)

365 - I start here and do about half of the hits at this temp.

375 - I move to this middle temp when the vapor production starts to drop off.

385-90 - If a load hasn't cashed out yet after five or so draws at the middle temp I push it up a final 10-15 degrees to draw out the last two or three.

This cycle works great with fine ground material in a convection vape, and it looks from your experience as if I'll be able to do basically the same thing with the IQ's conduction system.
 

cobra505

Defined
Was another one of those guys waiting, tracking # stated that it was supposed to get it today, ran to the mailbox when the truck came, no dice, totally bummed. Had some nice Purple Kush already to go to.
 
cobra505,

almost there

Well-Known Member
Mystery strain in the IQ. Have a nice breeze going tonight watching the Last Lions Documentary on Youtube.
fYToA0N.jpg

HkXyLLp.jpg
Mystery strain in the IQ. Have a nice breeze going tonight watching the Last Lions Documentary on Youtube.
fYToA0N.jpg

HkXyLLp.jpg
Now this is the life I want, all this lounging and relaxing. Why can't I have it like this, my vape "sessions" are between work at work and work at home:ugh:. The good life, that's the only other thing I need besides more Dynavap everything and that masterpiece @Dan Morrison is working on:tup:.

@Surf Monkey
I was meaning to check out the vapor profile for u at 340 degrees but I screwed up and did it at 350 instead bc I'm an idiot with good intentions but awful memory. Anyway at 350(lower than my usual low), surprising very effective. Using the smaller spacer and pearl on mid position I got a very flavorful and visible 5 mins out of it. I know I can get at least another session out of this bc this little monster never stops. FYI, I saw plenty of vapor bc I was under my kitchen fan and it has a light, wouldn't want to mislead u
 
Last edited:

Nostalgia1

Active Member
I bit the bullet and basically bought the spacers for $18, which is over priced imo.

But the spacers are game changer. It saves me a lot of weed now. Before if I don't fully pack it, I'll get a lot less vapor, but now it doesn't matter how I pack it (because of the spaces).

The only thing that annoys me is the spacers get stuck a bit after I'm done vaping, and I'll have to use something small, like a paperclip to get it out.

EDIT: Do you guys do HERB -> SPACER -> PEARL BALL or SPACER -> HERB -> PEARL BALL?

For me I'm doing HERB -> SPACER -> PEARL BALL
 
Top Bottom